- v5.13.3 (20210615)
- Based on EDIMAX EW-7811Un V2 Linux Driver (Version : 1.0.1.3) 2021-10-01
- Support Kernel: 3.8 - 5.4 (Realtek)
- Support up to Kernel 6.2
- Supported interface modes:
- IBSS
- managed
- AP
- monitor
- P2P-client
- P2P-GO
- Packet injection
- TX power control
- LED control
- Power saving control
- Driver debug log level control
- REGD source selection
- Security:
- WEP 64/128-bit, WPA, WPA2, and WPA3
- TP-Link TL-WN722N V2/V3 150Mbps High Gain Wireless USB Adapter
- TP-Link TL-WN727N V5.20 150Mbps Wireless N USB Adapter
- TP-Link TL-WN725N V3 150Mbps Wireless N Nano USB Adapter
- EDIMAX EW-7811Un V2 N150 Wi-Fi 4 Nano USB Adapter
- ASUS USB-N10 Nano B1 USB Adapter Wireless-N
- D-Link DWA-125 Wireless N 150 USB Adapter(rev.D)
- D-Link DWA-123 Wireless N 150 USB Adapter(rev.D)
- D-Link GO-USB-N150 Wireless N 150 Easy USB Adapter(rev.B)
- D-Link DWA-121 Wireless N 150 USB Adapter(rev.B)
- Realtek RTL8188EU Wireless LAN 802.11n USB 2.0 Network Adapter
- Realtek RTL8188ETV Wireless LAN 802.11n USB 2.0 Network Adapter
- 802.11bgn Mini Wireless LAN USB2.0 Adapter
- ELECOM WDC-150SU2M Wireless Adapter
- Sitecom WLA-1100 V2 Wi-Fi USB adapter N150
- MERCUSYS MW150US V2 N150 Wireless Nano USB Adapter
- Rosewill RNX-N150NUB N150 Wireless Nano USB Adapter
Successful tested injection aireplay-ng -9 <interface>
, deauthentication aireplay-ng -0 1 -a <bssid> <interface>
.
NO fixed channel 1
issue.
Successful hcxdumptool driver test hcxdumptool -i <interface> --check_driver
and capture packets hcxdumptool -i <interface> -o test.pcapng --filterlist_ap=targets.lst --filtermode=2 --enable_status=15
(hcxdumptool -i <interface> -o test.pcapng --filterlist=targets.lst --filtermode=2 --enable_status=15)
.
Connecting to AP with WPA3 (WPA3-SAE) authentication method (IMPORTANT: Test distro Ubuntu 22.04 kernel 5.15 - NetworkManager 1.36.4 nmcli tool, version 1.36.4. Otherwise use wpa_supplicant).
Start WPA3 (WPA3-SAE) SoftAP.
TX power control tested with SoftAP mode and OpenWrt firmware (OpenWrt 21.02.0 r16279-5cc0535800, Channel Analysis Feature).
- Ubuntu 22.04 (kernel 5.19)
- Aircrack-ng 1.6
- hcxdumptool 6.2.6
- wpa_supplicant v2.11-devel-hostap_2_10-309-gc3d389b72
- hostapd v2.11-devel-hostap_2_10-309-gc3d389b72
Ubuntu 22.04 (kernel 5.18)
- wpa_supplicant v2.11-devel-hostap_2_10-309-gc3d389b72
- hostapd v2.11-devel-hostap_2_10-309-gc3d389b72
- Aircrack-ng 1.6
- hcxdumptool 6.2.6
Ubuntu 21.10 (kernel 5.17)
- hcxdumptool 6.2.4
- Aircrack-ng 1.6
- wpa_supplicant v2.11-devel-hostap_2_10-151-g3085e1a67
- hostapd v2.11-devel-hostap_2_10-151-g3085e1a67
Ubuntu 21.10 (kernel 5.16)
- wpa_supplicant v2.10-devel-hostap_2_9-2398-g8a54c252a
- hostapd v2.10-devel-hostap_2_9-2398-g8a54c252a
- Aircrack-ng 1.6
- hcxdumptool 6.2.4
Ubuntu 11.10 (kernel 3.0)
- Aircrack-ng 1.5.2
- hcxdumptool 4.2.1
Ubuntu 12.04 (kernel 3.4)
- Aircrack-ng 1.5.2
- hcxdumptool 4.2.1
Ubuntu 12.10 (kernel 3.5)
- Aircrack-ng 1.5.2
- hcxdumptool 4.2.1
Ubuntu 13.04 (kernel 3.8)
- Aircrack-ng 1.5.2
- hcxdumptool 5.1.4
Ubuntu 21.04 (kernel 5.11)
- wpa_supplicant v2.10-devel-hostap_2_9-2374-g9ef8491d9
- Aircrack-ng 1.6
- hcxdumptool 6.1.6
Ubuntu 21.10 (kernel 5.13)
- Aircrack-ng 1.6
- wpa_supplicant v2.10-devel-hostap_2_9-2398-g8a54c252a
- hostapd v2.10-devel-hostap_2_9-2398-g8a54c252a
Kali Linux 2019.1a (kernel 4.19)
- Aircrack-ng 1.5.2
- hcxdumptool 5.1.7
- wpa_supplicant v2.10-devel-hostap_2_9-2433-g8d881d942
Kali Linux 2020.3 (kernel 5.9)
- Aircrack-ng 1.6
- hcxdumptool 6.1.4
- wpa_supplicant v2.10-devel-hostap_2_9-2379-g4775a5f82
Kali Linux 2021.3a (kernel 5.14)
- Aircrack-ng 1.6
- hcxdumptool 6.1.6
- wpa_supplicant v2.10-devel-hostap_2_9-2433-g8d881d942
Ubuntu 21.10 (kernel 5.15)
- Aircrack-ng 1.6
- hcxdumptool 6.2.4
- wpa_supplicant v2.10-devel-hostap_2_9-2398-g8a54c252a
- hostapd v2.10-devel-hostap_2_9-2398-g8a54c252a
Download source:
git clone https://github.com/ivanovborislav/rtl8188eu.git
cd rtl8188eu
Install missing packages:
sudo apt-get install bc build-essential
Install linux headers:
sudo apt-get install linux-headers-$(uname -r)
or
apt-cache search linux-headers
sudo apt-get install linux-headers-5.14.0-kali4-amd64 (for example)
apt-cache search linux-image
sudo apt-get install linux-image-5.14.0-kali4-amd64 (for example)
Compile:
make
sudo make install
or
chmod +x install.sh
./install.sh -i
IMPORTANT: Prevent loading old driver r8188eu.
echo "blacklist r8188eu" > /etc/modprobe.d/realtek.conf
Raspberry Pi:
Edit Makefile
:
Ln145 - CONFIG_PLATFORM_I386_PC = y
to CONFIG_PLATFORM_I386_PC = n
Ln146 - CONFIG_PLATFORM_RPI_ARM = n
to CONFIG_PLATFORM_RPI_ARM = y
for ARM
or
Ln147 - CONFIG_PLATFORM_RPI_ARM64 = n
to CONFIG_PLATFORM_RPI_ARM64 = y
for ARM64
sudo git clone "https://github.com/ivanovborislav/rtl8188eu.git" /usr/src/rtl8188eu-5.13.3
sudo dkms add -m rtl8188eu -v 5.13.3
sudo dkms autoinstall
dkms status
or
sudo git clone "https://github.com/ivanovborislav/rtl8188eu.git" /usr/src/rtl8188eu-5.13.3
sudo dkms add -m rtl8188eu -v 5.13.3
sudo dkms build -m rtl8188eu -v 5.13.3
sudo dkms install -m rtl8188eu -v 5.13.3
dkms status
sudo airmon-ng check kill
sudo ip link set <interface> down
sudo iw dev <interface> set type monitor
sudo ip link set <interface> up
sudo ip link set <interface> down
sudo iw dev <interface> set type managed
sudo ip link set <interface> up
sudo systemctl restart NetworkManager (sudo service network-manager restart)
Note: Set TX power before start SoftAP mode. ...set txpower fixed 3000 = txpower 30.00 dBm
.
sudo iw dev <interface> set txpower fixed 3000
Remove (unload) a module from the Linux kernel.
sudo rmmod /lib/modules/$(uname -r)/kernel/drivers/net/wireless/8188eu.ko
Insert (load) a module into the Linux kernel.
sudo insmod /lib/modules/$(uname -r)/kernel/drivers/net/wireless/8188eu.ko rtw_ips_mode=1 rtw_drv_log_level=4 rtw_power_mgnt=2 rtw_led_ctrl=1
Create a file 8188eu.conf
containing options 8188eu rtw_ips_mode=1 rtw_drv_log_level=4 rtw_power_mgnt=2 rtw_led_ctrl=1
.
Copy a file to /etc/modprobe.d/
directory.
sudo cp -f 8188eu.conf /etc/modprobe.d
Power saving control.
IPS (Inactive Power Saving) Function, rtw_ips_mode=
0:Disable IPS
1:Enable IPS (default)
LPS (Leisure Power Saving) Function, rtw_power_mgnt=
0:Disable LPS
1:Enable LPS
2:Enable LPS with clock gating (default)
Driver debug log level control, rtw_drv_log_level=
0:_DRV_NONE_
1:_DRV_ALWAYS_
2:_DRV_ERR_
3:_DRV_WARNING_
4:_DRV_INFO_ (default)
5:_DRV_DEBUG_
6:_DRV_MAX_
Driver LED control, rtw_led_ctrl=
0:led off
1:led blink (default)
2:led on
Driver REGD source selection, rtw_regd_src=
0:Realtek defined
1:OS (default, get channel plan from OS)
Example wpa_supplicant.conf with WPA3-Personal (WPA3-SAE).
ctrl_interface=/var/run/wpa_supplicant
update_config=1
country=EN
p2p_no_group_iface=1
sae_groups=19 20 21
network={
ssid="WPA3"
proto=RSN
key_mgmt=SAE
pairwise=CCMP
group=CCMP
ieee80211w=2
psk="1234567890"
}
Now start...
sudo systemctl stop NetworkManager
sudo killall wpa_supplicant
sudo wpa_supplicant -B -i <interface> -c wpa_supplicant.conf
sudo dhclient <interface>
Example hostapd.conf with WPA3-Personal (WPA3-SAE).
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
driver=nl80211
ssid=WPA3
country_code=EN
channel=6
beacon_int=100
dtim_period=1
fragm_threshold=2346
rts_threshold=2347
hw_mode=g
ieee80211n=1
max_num_sta=16
wmm_enabled=1
ht_capab=[HT40-][SHORT-GI-20][SHORT-GI-40][RX-STBC1][MAX-AMSDU-7935][DSSS_CCK-40]
ignore_broadcast_ssid=0
auth_algs=1
wpa=2
wpa_key_mgmt=SAE
wpa_pairwise=CCMP
rsn_pairwise=CCMP
ieee80211w=2
sae_groups=19 20 21
sae_require_mfp=1
wpa_passphrase=1234567890
Now start...
sudo killall hostapd
sudo hostapd -i <interface> hostapd.conf
-
TP-Link TL-WN722N V3
-
Linksys WRT1200AC V2
- OpenWrt 21.02.0 r16279-5cc0535800 / LuCI openwrt-21.02 branch git-21.231.26241-422c175
config wifi-iface 'default_radio1'
option device 'radio1'
option network 'lan'
option mode 'ap'
option macaddr '30:23:03:XX:XX:XX'
option ssid 'WPA3'
option encryption 'sae'
option key '1234567890'
option ieee80211w '2'