This is a ESP32-compatible C component for the Maxim Integrated "1-Wire" protocol.

It is written and tested for version 3.0 of the ESP-IDF environment, using the xtensa-esp32-elf toolchain (gcc version 5.2.0, crosstool-ng-1.22.0-80-g6c4433a).

Support for v2.1 is available on the ESP-IDF_v2.1 branch.

This library includes:

• External power supply mode (parasitic mode not yet supported).
• Static (stack-based) or dynamic (malloc-based) memory model.
• No globals - support any number of 1-Wire buses simultaneously.
• 1-Wire device detection and validation, including search for multiple devices on a single bus.
• Addressing optimisation for a single (solo) device on a bus.
• 1-Wire bus operations including multi-byte read and write operations.
• CRC checks on ROM code.

This component includes two methods of bus access - delay-driven GPIO and RMT-driven slots. The original implementation used CPU delays to construct the 1-Wire read/write timeslots however this proved to be too unreliable. A second method, using the ESP32's RMT peripheral, results in very accurate read/write timeslots and more reliable operation.

Therefore I highly recommend that you use the RMT driver. The GPIO driver should be considered deprecated.

Automatically generated API documentation (doxygen) is available here.

The source is available from GitHub.

The code in this project is licensed under the MIT license - see LICENSE for details.

• esp32-ds18b20 - ESP32-compatible DS18B20 Digital Thermometer component for ESP32
• 1-Wire Communication Through Software
• 1-Wire Search Algorithm
• Espressif IoT Development Framework for ESP32

Thank you to Chris Morgan for his contribution of adding RMT peripheral support for more reliable operation.

Parts of this code are based on references provided to the public domain by Maxim Integrated.

"1-Wire" is a registered trademark of Maxim Integrated.