When I was young I'd heard rumours about a fantastical sound card for the computer known as the Roland MT-32 - imagining that if it was good enough to be the default sound device for games such as Monkey Island, then it had to be good! Of course I was a kid at the time, the kind that didn't even have enough money to even be allowed inside the kind of stores that would sell this stuff. Fast forward to adulthood and I learned that it wasn't a sound card at all - it was a standalone MIDI-module! The second thing I learned was that they originally were, and still are, incredibly expensive items. Especially for those of us who were born without any sense of rhythm.

Cue other incredibly talented people found on the Internet, in particular for creating the mt32-pi project - allowing people like myself to build a device capable of at least emulating one of these fantastical devices. All it takes is a somewhat cheap, mostly available Raspberry Pi 3 or 4. As with everything I enjoy playing around with, as long as it is simple enough for me to do so - I'll look into building my own version of it. Granted, I may have cheated more than a little bit by starting out with a copy of the design files for clymsyMIDI as my starting point.

I had a lot of fun building the original BulkyMIDI-32, my process can best be described as an exciting journey down a rabbit hole of all things MIDI including similarly themed audio projects. This resulted in a multitude of adapters built for connecting things together, including a whole host of interesting modules that can be either used with the BulkyMIDI-32 - or - in many cases they can be also be used by themselves or alongside other vintage music equipment. In order to keep things separate I've split the modules-section so that you'd quickly be able to determine which PCB designs could belong together.

• 1> Modules
  • 1.1> BulkyMIDI-32
  • 1.2> BulkyMIDI-32 Audio Switch
  • 1.3> BulkyMIDI-32 Channel Monitor
  • 1.4> BulkyMIDI-32 Channel Monitor 2
  • 1.5> BulkyMIDI-32 Dexed
  • 1.6> BulkyMIDI-32 ExModule
  • 1.7> BulkyMIDI-32 Input Switch
  • 1.8> BulkyMIDI-32 Internal
  • 1.9> BulkyMIDI-32 Play
  • 1.10> BulkyMIDI-32 Power Switch
  • 1.11> BulkyMIDI-32 VU SIDi
• 2> Adapters
• 3> Acknowledgements

For the technical details as well as information regarding the modules included by this specific github project, consult the table below. Follow the documentation links for build instructions, BOM and anything else you'd need for that specific module. Faceplates and any backplates listed are for the most most part only decorative, allowing you to put together something similar to a case without actually requiring a 3d-printer. Also, check out the schematics for more information about the electronic side of things.

As previously mentioned several modules has been designed as part of the same project, these add different functionality and due to their identical form factor - they can all be stacked to build your very own MIDI-mountain! Though they bear the BulkyMIDI-32 name, they can all be used independently of the main BulkyMIDI-32-module - they will communicate using standard MIDI. Should you want to, they should be able to live happily alongside your vintage MIDI-devices.

Status: Completed

This is the main module of the project, if you came here looking to build an mt32-pi device then this is it. You have the option of going the cheaper route of just building the basic module, consisting only of the main module and nothing else. Alternatively, you can just build the whole thing as shown above. Given the cost of PCB fabrication, I recommend just building a complete unit. Note that the list below will include alternate versions of boards, so you need to decide which of them you'll need based on their description.

Status: Completed

One of the drawbacks to using a vintage boombox as my stereo speaker system, is that it doesn't have any more than one audio input meaning that I would normally have to switch around the cables all the time. Well I can't really complain as not everyone is lucky enough to even have an input, at all! However, since I have one I wanted something that would let me switch between at the touch of a button. So, I built a simple audio switch and now you can build one as well!

Status: Working, but documentation is missing.

One of the first things I wanted to add to the BulkyMIDI-32 was more blinking lights, as it turns out there were devices back in the day that did this - the were called channel monitors. Their purpose is simply to have an LED for each of the 16 MIDI channels, then as a MIDI-message passes through that contains channel information - the corresponding LED is lit up and will stay on for some time.

The circuit design was based on an article by W. Dunczewski, titled MIDI Channel Monitor and was printed in the 1993 october issue of Elektor Electronics. Besides the obvious attraction to blinking lights in controlled forms, what I liked about it is that everything is implemented entirely in basic CMOS logic chips (there's no traditional CPU or MCU handling the data).

Status: Working, but documentation is missing.

This module displays MIDI-channel activity in realtime, with an LED for each of the 16 channels. While it effectively does the same as the BulkyMIDI-32 Channel Monitor, I also wanted to build a version that could be put together using parts that aren't quite as vintage as the parts required by that module.

In the end, the core of the module was implemented using an Arduino Pro Micro in combination with a couple of shift registers. In theory the board can be built up as a simple USB-to-MIDI converter, or it can be used to have the MCU process MIDI-messages - note that Arduino sketches to do any of this do not exist.

Status: Untested prototype

A variant of BulkyMIDI-32 that was intended for running MiniDexed, a software that is similar to MT32-PI - except that it instead emulates up to eight Yamaha DX7 synthesizers on mostly the same hardware. I built one up and played around with it, my conclusion afterwards is that while it may work - I have absolutely no idea of how to use it. Or even a real keyboard for that matter. So in case someone finds it interesting enough to build one up using the files provided, please tell me whether it actually works.

Status: Completed

There was a time when PC soundcards, mostly ISA, came with a WaveTable-header for attaching WaveTable-modules directly onto it it. Originally devised for mounting a separate WaveBlaster-module onto a Creative Soundblaster 16, but most often they're just referred to as WaveTable-headers as the form factor was inevitably adopted by several other companies who made similar modules with their own chipsets on it.

Ordering a selection of more modern modules from serdashop.com for installing into one of my vintage PCs, I couldn't decide on which one to put where - until I finally decided and realized that my AWE32 doesn't even have that feature. So for a year or so they've lived in the box the came in, buy in the end I figured it was time to do something with them. So I started building something to use them externally instead - following the guide up on atari.joska.no, itself referencing an article printed in Elektor Electronics (july/august 1997), I ended up with the BulkyMIDI-32 ExModule. Plug a MIDI-cable into it, hook the audio output up to your amplifier and enjoy!

Status: Completed

This module was created in order to easily switch between different MIDI inputs, the selected input is then replicated to three different THRU-ports. What this allows me to do on the input-side is to select between a keyboard, a USB MIDI-interfaces connected to a modern system and that of a vintage computer system. Duplicating the MIDI-messages on different THRU-ports allow me to send the same data to several MIDI-devices, such as an original Roland MT-32 as well as a MT32-PI (such as the BulkyMIDI-32 itself).

Status: Working prototype

In many ways this is the module that this entire repository has building towards, a 3.5" drive bay expansion for vintage computers. Is this a sane thing to attempt to build without any kind of 3d-printer involved in the process? No it is not. Did I build it anyway? Yes, you're looking at it. Is it finished? No.

Status: Completed

In many ways the missing module when it comes to playing around with a Roland MT-32, both the vintage kind as well as the emulated version that is the main BulkyMIDI-32 module (running mt32-pi) - simply playing back a .MID-file without a computer attached to it. Implemented with an Arduino Pro Micro at its heart, you can put your files on an SD-card and play them back - use a long press when starting playback to loop the file, another long press to stop playback. During playback the rotary encoder encoder can be used to speed up or slow down the tempo.

Given that the designs have provisions for more than the expected number of MIDI-ports, a change in firmware can allow the hardware design to be used for entirely different purposes such as MIDI-message filtering, merging inputs and similar functionality.

Status: Untested

Status: Prototype, with issues to work out

This is a module that I'll probably have to rethink properly, mostly because of attempting to integrate a little too much in one go without a proper understanding of either of them. The first part of it is a VU-meter based on the LM3915 chip which isn't a solution I particularly enjoyed using, at least in part due to one of the two modes supported by the chip doesn't really work properly when powered from 5v. The other mode is too flickery for my comfort.

The SIDi-part of it was based directly on github-project SIDI by user doctea, and I can't figure out how to get it to work. This probably isn't a problem with the code, but more my lack of understanding how to work with a music chip directly. I'm not a musician or even know how to play any sort of instrument, so it is a case of biting off more than I can chew - at least for the forseeable future.

Separate from the main modules are several adapters, designed for use with the BulkyMIDI-32 in particular though most of them simply speak standard MIDI - so they should work with original equipment such as the original Roland MT-32. Follow the included in the table below for details such as build instructions, BOM and anything else you'd need for that specific module. The repository also includes a folder for schematics in PDF-format, these will be needed in order to track down any faults you encounter when building up and testing the adapters.

NB! The repository may contain pieces of modules and adapters designed for use with these, if they're not listed in one of these tables then they're a work in progress. They might be functional, they might blow up or I simply haven't remembered to update the documentation for them yet. PCBWay order links will always point you towards the last know good revision that I've tested, meaning they worked at least once with the equipment I have available to me.

Everything comes from something, in particular when it comes to most of my electronics projects. I mainly build things I would like to own, often doing a respin to fit my own particular style and preferences with most of the hardest parts of the designs already provided by people more knowledgable than I.

The software running on the Raspberry Pi is provided by the mt32-pi while the hardware itself can be considered to be based on the information provided by the associated wiki. As already mentioned I started out with the design files for clymsyMIDI as a starting point for the design.