Coil is a CNI-based network plugin for Kubernetes.

Coil is designed with respect to the UNIX philosophy. You can combine Coil with any routing software and/or any network policy implementation.

Coil allows to define multiple IP address pools. You can define a pool of global IPv4 addresses for a small number of pods and another pool of private IPv4 addresses for the remaining pods.

There are blog articles about Coil: https://blog.kintone.io/archive/category/Coil

Version 2 is generally available (GA). It conforms to CNI spec 0.4.0.

• Kubernetes Version: 1.18, 1.19, 1.20

  • Other versions are likely to work, but not tested.

• (Optional) Routing software

  • Coil has a simple routing software for flat L2 networks.
  • If your network is not flat, use BIRD or similar software to advertise the routes.

• Address pools

  Coil can have multiple pools of IP addresses for different purposes. By setting a special annotation to a namespace, you can specify a pool for the pods in that namespace.

• IPv4/IPv6 dual stack

  In addition to IPv4-only and IPv6-only stacks, Coil can define dual stack address pools.

• Running with any routing software

  Coil provides a simple router for clusters where all the nodes are in a flat L2 network. This router, called coil-router, is optional.

  For more complex networks, Coil exports routing information to an unused kernel routing table. By importing the routes from the table, any routing software can advertise them.

• On-demand NAT for egress traffics

  Coil can implement SNAT on Kubernetes. You can define SNAT routers for external networks as many as you want.

  Only selected pods can communicate with external networks via SNAT routers.

• Auto MTU configuration

  Coil detects the optimal MTU and configures MTU for container networks.

Refer to the design document for more information on these features.

Coil can run on kind clusters using Docker.

Prepare a recent Ubuntu and install Docker and Go, then run:

$ cd v2
$ make certs
$ make image

$ cd e2e
$ make setup
$ make start
$ make install-coil
$ ../bin/kubectl apply -f manifests/default_pool.yaml

Now you can play with Coil.

Project Neco uses Coil with these software:

• BIRD to advertise routes over BGP,
• MetalLB to implement LoadBalancer Service, and
• Calico to implement NetworkPolicy.

Coil can work with Cilium through its generic veth chaining feature.

Installation procedures are described in docs/setup.md.

The user manual is docs/usage.md.

docs directory contains other documents about designs and specifications.