This is a sandwich-style case for the Bus Blaster v4.1a intended to be cut with a laser cutter using 2mm acrylic glass sheets.

The case consists of 2 layers below the PCB and 4 layers above the PCB, that are hold together with four M3 screws (ca. 15mm length) and a (domed cap) nut. You should cut the following colors for the individual layers (gray line is the PCB edge and only provided for reference):

Layer 0 (bottom):

• black

Layer 1 (below PCB):

• black
• orange

Layer 2 (above PCB):

• black
• orange
• blue
• violet

Layer 3:

• black
• orange
• green
• violet

Layer 4:

• black
• orange
• violet

Layer 5:

• black
• orange