If you don't want SGMiner checks or use different miner - disable this feature (don't use --sgminer key).

To enable SGMiner API add following parameters to sgminer.exe command-line:

sgminer.exe --api-listen <your-other-parameters>

You can get it from:

• Releases page: https://github.com/soar/miner-healthcheck/releases
• Yandex.Disk: https://yadi.sk/d/x70GZTrP3RaGsC/tools/healthcheck

You need two keys:

Each started instance of miner-healthcheck will send push messages to this URL every X seconds. If StatusCake won't receive this messages for some time - you will get notification.

So this is check - is your RIG alive or not?

How to get your STATUSCAKE_PUSH_URL: https://github.com/soar/miner-healthcheck/wiki/StatusCake-Integration

When your RIG have some troubles - push notification will be sent to IFTTT webhook URL. This URL is common for all your RIGs.

How to get your YOUR_IFTTT_WEBHOOK_KEY: https://github.com/soar/miner-healthcheck/wiki/IFTTT-Integration

Perform test running with next command line:

miner-healthcheck.exe ^
    --health-report-url "STATUSCAKE_PUSH_URL" ^
    --ifttt-check ^
    --ifttt-key YOUR_IFTTT_WEBHOOK_KEY

If test was successful - you should see message in Telegram:

Event: check_integration
Message: success

miner-healthcheck.exe ^
    --health-report-url "STATUSCAKE_PUSH_URL" ^
    --ifttt-key YOUR_IFTTT_WEBHOOK_KEY ^
    --sgminer ^
    --gpu-hashrate-threshold 0.3 

1. Script should be started at system startup
2. It has infinite loop and runs forever
3. Every X seconds - it performs checks:
   • if SGMiner checks are enabled:
     • SGMiner is alive
     • SGMiner answers on API requests
     • Each GPU is alive
     • GPUs hash-rate is above threshhold
4. If checks passed successfully - it makes remote HTTP request to report about it health to STATUSCAKE_PUSH_URL
5. If remote endpoint doesn't receive health check report in Y seconds - StatusCake sends notification to configured targets (see Web-UI for settings)

• --help - show help
• --debug - show debug messages (not recommended for every-day use)
• --sleep X - time between checks, 10 seconds by default, recommended
• --sgminer - enable specific checks for SGMiner (via API, see Installation)
• --gpu-hashrate-threshold X.X - when one of installed GPUs will gave hashrate lower, than this value (in KHash/sec) - notification will be sent

miner-healthcheck.exe --health-report-url "https://push.statuscake.com/?PK=XXXXXXXX&TestID=00000&time=0" --sgminer --gpu-hashrate-threshold 0.36 --ifttt-key lk9y6DOXXXXXXXXX

pyinstaller --onefile --icon miner.ico --name miner-healthcheck-v1.2.exe run.py