smeathers / lede-pi0w-usb Goto Github PK

In order to avoid the need of keyboard/screen, you can edit /etc/config/wireless and make disable='0' under radio0. The "data" partition is the second one.

I followed the tutorial at https://github.com/smeathers/lede-pi0w-usb#readme

when I Power the Pi0w via the USB port connected to a computer
I get the USB ethernet but it is disconnected

help

How to install latest openwrt snapshot on raspberry pi 0 w?

Greetings,

Thank you for this HOW-TO.

I am not very familiar with openwrt (yet) but in order to the dhcp server on the RaspberryPi Zero to
serve an addres over the USB cable, I needed to add the 'usb0' interface to the LAN network - via LuCI. (Not sure how to do this from uci.)

This was missing from your instructions, but once set, everythign worked as expected.

After following your instructions I was able to communicate over USB by setting static IP addresses on both ends (while also connected via Wifi). I was fighting Ubuntu's NetworkManager, so this didn't last long before being stomped on.

Cheers,
Paul