slawekmikula / flightgear-addon-fgcamera Goto Github PK

The [FGFS wiki](http://wiki.flightgear.org/FGCamera page) is a good start, but i think the basic information on hot to configure and use the system should also be in a readme of the addon.

Workaround is to just select a preset camera by eg pressing 0 on the keyboard.

The plane in question is HHS81/c182s@cb0fccd, (master branch as of now)

Wrong (FOV=68.7; maybe interference with FGFS view setting for compensating wider screens?):

After hitting 0 for the default view with FOV=75:

Move default keyboard controls to more sophisticated. Right now when enabling fgcamera you don't have ability to control aircarft via up/down/right/left keys. Move fgcamera modification buttons to eg. shift+up or enable it only when configuring camera views.

• It would also be cool if ground shaking depends on the surface roughness.
• same for air, smooth air my be lower shaking than turbolences

Ability to have fgcamera config in the aircraft directory and load it from there.

Brilliant addon! Similar to Beni's request, could the shaking be dependant on speed? For example little to no shaking when stationary.

When switching on the walker, the camera will not switch to the walk view.

We should detect that walker is outside and switch to the walk view.

Right now the right mouse dragging of the view has fixed behaviour.

The FG Option of dragging the view has opposite behaviour (mouse up => pitch head upwards)
The FGCamera dragging should use the same orientation.

In flightgear there is already an option for the view cycle (/sim/mouse/right-button-mode-cycle-enabled, TRUE=Spring-load-off).
This should be used instead defining a custom option.

The default config assigns the space key, which is a long standing FGCom keybind (together with Shift-Space for COM2).
The key should be left free to FGCom.

Workaround: in the fgkeyboard.xml inside the addon dir the keybind can be commented out.

Add startup info (with option to disable it) about keybinding change and keys 0-9 with different usage

When pressing "v" to switch to a "legacy" outside view, the mouse spring-look behaviour gets set to "right-click=change mode", despite spring loaded mode was selected in legacy options.

I would have expected that the setting is persistent regardless if using FGCamera or legacy views.

I found out that my mouse is desensified after each startup.
In the standard mouse settings I have 4 as setting, but if i use the FGCamera, it behaves like set to 2.
The slider still shows 4 when opening the GUI, but sliding it down and up again restores the behaviour to match 4.

Somewhere it looks like the setting is overwritten to 2 for the flight controls.
I would have expected that the FGCamera does just affect view and leaves my flight sensitiveness settings alone...