need way to define IP to bind/listen to. Port= is not sufficent about endlessh HOT 2 OPEN

That means i am unable to run/start entlessh on plain port 22, since it is "in use" on some interfaces/IP addresses

@Windows-Is-Cancer you can also start it on a high port and use iptables to redirect the low port on your outside interface. I was using the #40 socket arrangements previously (which works for your case), but this is more straightforward for my similar deployment.

e.g.

-t nat -A PREROUTING -i eth0 -p tcp --dport 22 -j REDIRECT --to-ports 2200
-A INPUT -p tcp --dport 2200 -m state --state NEW,ESTABLISHED -j ACCEPT

I guess theoretically my inside users could find the tarpit. :)

from endlessh.

It may be easier with docker.
https://docs.docker.com/network/
You can bind the containers port to a host ip+port.

from endlessh.