This project implements a very simple graphical ammeter/powermeter on STM32 devices.
Hardware shopping list:
- Nucleo-F070RB or Nucleo-L432KC. Any other Nucleo board can be easily adapted as STM32 Cube APIs are used
- INA219 High Side DC Current Sensor Breakout
- SSD1306 128x64 display
Pinout for Nucleo-F070RB board
| Signal | STM32 IO | Nucleo connector |
|---|---|---|
| INA219 SCL1 | PB8 | CN10-3 |
| INA219 SDA1 | PB9 | CN10-5 |
| SSD1306 SCL2 | PB10 | CN10-25 |
| SSD1306 SDA2 | PB11 | CN10-18 |
Pinout for Nucleo-L432KC board
| Signal | STM32 IO | Nucleo connector |
|---|---|---|
| INA219 SCL1 | PA9 | CN3-1 |
| INA219 SDA1 | PA10 | CN3-2 |
| SSD1306 SCL3 | PA7 | CN4-6 |
| SSD1306 SDA3 | PB4 | CN3-15 |
| Button | PA3 | CN4-10 |
At reset the instantaneous values of current and power are displayed in text form on the display. When pressing the button a first time, a current measurement is performed at 10kHz and the mean value of the acquisition is displayed. When pressing the second button a second time, a power measurement acquisition at 10kHz sampling rate is started. When acqusition is finished, either because the button is released or the interal buffer is filled, the acquired data is displayed.
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent