ESP32 Bluetooth Low Energy Mesh

Clone the BLE_Mesh Repository first:

In ESP-IDF Command Prompt

    git clone https://github.com/sinku1196/BLE_Mesh.git
    cd BLE_Mesh/

Compile the project:

    idf.py build

Once the compilation process ends, you can upload the compiled code inside the ESP32 board.

    idf.py -p COM3 flash

Replace COMx with the device on which the ESP32 is connected. Repeat the same process on all the required devices, then open the serial monitor of the connected ESP32 to display its routing table

    idf.py -p COM3 monitor

Replace COMx with the device on which the ESP32 is connected.

• Two or more ESP32 boards
• Download the ESP-IDF Official Development framework here
• Git (Optional)here