simonlmn / can-wifi-gateway-stiebel-eltron Goto Github PK

Hey Simon, great repository!!

Totally want to try that with my heat pump.

Before I go full in with that solution I want to understand of how one can include it in e.g. home assistant.
Could you please provide sample-data of the MQTT topic or your specific setup to include your stiebel eltron device?

How could I use that translate-file from can2mqtt in with your project?
https://github.com/Hunv/can2mqtt/blob/a9b2cb4717d23e6bac56b9b4344bb17feb73fceb/can2mqtt_core/can2mqtt_core/translator/stiebel_eltron/StiebelEltron.json

Thanks in advance!
Dan

This may require refactoring of existing code for better testability (independent of Arduino core or libraries).

https://github.com/bxparks/AUnit could be used here.

Hello,

Sorry for asking questions this way but I don't know other way.

I like your work and I want to use it to push values from heat pump to Influx db.

My question is : do we have to poll heat pump for values, or it sent it automatically regularly ? (I'm not used with can bus at all)

Thank you

Hello Simon,

i updatet to 1.3 and it seams that everything is working as expected.
As you now, i am using a tecalor TTL 5.6 with a WPM 4. As we talked,
it seams that the datapoints / can adresses are not the same as the older
models.
Is there an easy way to configure a other elster-table as you did in your
scetch ? Or must i set up a ne table and load sketch via arduino (or whatever)
to the devices ?

kind regards
Stefan