Hello,
I'm new to the hackintosh and I can't understand it in one extend (I only have managed to install macOS in i3-9100F with an RX 550)
I tried to boot macOS but in the opencore gui I don't have available the macOS recovery available in order to boot in it, the only option is to boot to windows.

I'm using Ryzen 7 5700G, RX 6600, MSI B450-A PRO MAX and 16GB DDR4 Ram from corsair.

Hi, i'm trying to install the Monterey 12.3.1 on my pc but the install macOS option doesn't open a tab like it should, any thoughts?

Also, i've got a GTX 1070, do you think it will work?

I currently have the following equipment, aorus pro WiFi b450 motherboard, Ryzen 3600 XT, 16 GB ram, Rx 570 aorus GPU, my question is if the EFi you prepared works for me on mine.

pci build flags appears my system specs are 5600h with 6800m graphics card lenovo laptop

Everything is working fine for me except the ethernet. It shows my ethernet is connected but I can't use the internet. Can you tell me how to solve this?

Hi, when i start the installation of macos, i have this error https://ibb.co/3SN7GqQ.

Configuration:
Ryzen 5 5600x
RTX 3070
MacOS Ventura

thanks.

Greetings Bro, thanks for the help, but I need to fix this problem. It turns out that when the system loads and I start the section for approximately five seconds, it restarts automatically. Or maybe it's because I didn't change the configuration of the serial and model number?

In Readme add instruction how to install in Gigabyte mobo.
Also please tell what to change in mobo

Hi @sileshn

Any idea?

The EFI work for Big Sur, on Monterey crash on boot.

Components:
https://valid.x86.fr/238hc7

hello (i'm new here - still getting my bearings).

I've followed the dortania guide to a T (thanks be to those folks), but keep sticking. After brief a brief loading sequence, I get stuck at 'couldn't get array serialized at 0 index.' then, I'm able to select the USB, which reveals the apple logo (but no load bar). This stalls infinitely. the last line of the log reads 'AAPL: #[EB|LOG:EXITBS:START]'. (log attached).

I've also tried all prospective solutions at dortania, to no avail. Can I get any pointers to proceed?

System:
CPU: Intel 13600k
GPU: Asrock Radeon 6800xt
MOBO: Asrock Z790M

Thanks in advance. I know there's some real big brains here.
opencore-2023-07-30-213322.txt

Hello,

Two years ago, I had a successful hackintosh installation (Mojave) and recently I upgraded my GPU to RX6600 and wanted to install Monterey. However I'm not able to load after verbose while booting. I tried many EFIs. Most of the time i got stuck on the verbose boot log screen with those EFI files. Your EFI fixed stucking on verbose but this time I am getting black screen after verbose and there is no signal on my display. My mainboard is exactly the same as yours. All system components except gpu are same as I used in Mojave. I'm also sharing my full specs below. Any suggestions ? Thanks in advance!

MotherBoard | Gigabyte B450 Aorus Elite
CPU | AMD Ryzen 5 1600 AF
GPU | AMD Radeon RX6600 8GB
RAM | G Skill 32 GB (8x4)

Best EFI for “Ryzentosh”

With your config, I upgraded my 10.15.7 to 11.5.1 and all works good. Besides it now can sleep. I am all tears. Thank you bro.

My specs are motherboard MSI B450 Motar Max, CPU AMD 3600, GPU AMD RX580 8G 2304SP, SSD SN550 1T

I've been using your EFI( with my own SMBios) for years and thank you for that.

But recently I realized that the GPU is always running at full speed as soon as the power button is pressed. I have two ryzentosh machines, one with RX 580 and the other with RX 560D, both of them have the same problem.

Actually I sort of don't care about the fan speed, what bothers me is the noise of the fans.

I wonder if there's something I can do to turn on dynamic speed

Thank you.

Hello,

I downloaded this EFI to boot MacOS Sonoma 14.1 in VMWare on my PC. Everything works as expected, but keyboard didn't work

PC Specs

CPU: AMD Ryzen 9 5900 12 Cores
GPU: AMD Radeon RX 580 8GB
64GB DDR4 Ram
Gigabyte B550M Motherboard
HID Wireless Keyboard and Mouse (it has USB receiver plugged into USB port)
Host OS: Microsoft Windows 11

VMWare Workstation Pro 17
OS: Microsoft Windows
OS Type: Windows 11 x64

Steps to reproduce

1. Create VM with guest OS: Microsoft Windows and OS Type: Windows 11 x64, with 8GB Ram, 80GB HDD and 6 Cores CPU
2. Attach MacOS Sonoma 14.1 USB Stick to the VM (with the EFI of this repository in the EFI partition)
3. Boot from the USB
4. After the installer gets to the recovery page (the page to select disk utility), Mouse is working, but Keyboard isn't

What i have tried

1. Set XhciPortLimit to false
2. Mapped USB with USBToolBox and place in kexts folder and snapshot config.plist
3. Included OpenUsbKbDxe.efi in drivers folder
4. Included Ps2KeyboardDxe.efi in drivers folder
5. Used UsbInjectall.kext
6. Added SSDT-CPUR.aml to ACPI folder

My keyboard and mouse is a 2.4G Wireless, it uses one single USB receiver for both keyboard and mouse. The mouse worked, but keyboard doesn't. I even tried to complete the installation with only mouse (leaving any textfield with default text) and the installation completed successfully without error. The only problem is keyboard.

Please help!

https://ibb.co/GknNTXC
There is no installer in the OpenCore loader .dmg Catalina

Everything seems to be working but I can't hear anything good using HDMI audio. Pops and Cracks everywhere. Audio is good with my internal audio and USB audio card, btw.

My rig:

Asrock B450 Fatal1ity Gaming AC ITX
AMD Ryzen 5 3600
Corsair Vengeance 16 GB (8+8) 3200 MHz
MSI Radeon RX 570 Armor 4G OC 4GB
NVMe Western Digital SN750 500 Gb

What do you think could be?

Specs:
CPU: AMD Ryzen 7 2700X
GPU: AMD Radeon RX 590, AMD Radeon RX 560
RAM: 32 Gb Gskill
MOTHERBOARD: Gigabyte B450 Aorus Pro

Booting by the USB I see the Clover Boot Loader with only the "Clear NVRam" otion with a Terminal logo, i can't see the instaler logo or anytihng about

Hello, i need to disable SIP cos I need to use unsigned kext "Kx audio driver" for my newly bought creative audigy Rx sound card. Problem is that if I disable SIP, macOS is very slow and laggy. I can't copy or delete files, I can't mount dmg, I can't open any settings and I can't run 80% of apps. Sometimes is impossible even restart or turn off the computer. Once I enable SIP, everything is smooth, fast and perfect. I need to know if its specific problem of my computer (for example BIOS settings) or if its problem specific to this EFI. Thanks for your help.

Hello, I have gigabyte x470 aorus ultra gaming with rtx 2060 super disabled and Rx 550 Lexa working fine, but when I have been using it for a while without cause it restarts. can you help?

use the translator I speak Spanish

hii
can anyone built or give me
EFI file change os in mac os
this is laptop
device name is dell inspiron 3505
processor name ("AMD Ryzen 5 mobile")
processor code name ("picasso")

What is the purpose of SSDT-SLEEP-PTXH.aml
It seems that I have some strange issues with USB on Ventura 13.5.1. My network keeps disconnecting on builtin eth and USB adapter. Wifi works fine.

My boot screen don't show Reset NVRAM... in config.plst it is set to true...

Hi, I would like to know how you did to boot Manjaro Linux, I currently use OpenLinuxBoot but I find it limited because I haven't found out how to pass parameters to the kernel at boot time. Do you chainload with GRUB and the like or do you use an entry for EFISTUB? I couldn't identify the method looking at your config.plist

pci build flags error appears

Hello, where do I need to change the core count? Here

Graphics Card is weird, but it works like a charm