PixArt PMW3610DM-SUDU low power laser mouse sensor breakout board, can be operated with either a 1.8V or 3.3V voltage level. Alternative to PMW3360 PCB.
Online preview avaliable here, powered by KiCanvas.
| Ref | Value | Footprint |
|---|---|---|
| C1 | 3.3uF/16V | SMD 0603 |
| C2, C3 | 100nF | SMD 0603 |
| C4 | 100nF X7R | SMD 0603 |
| C5 | 10nF | SMD 0603 |
| C6 | 10uF X7R | SMD 0603 |
| C7 | 10nF X7R | SMD 0603 |
| C8, C9 | 1uF | SMD 0603 |
| C10 | DNI | SMD 0603 |
| R1 | 10k | SMD 0603 |
| U1 | PMW3610 | 16 Pin |
| U2 | TLV74318 | SOT-23-5 |
| J1 | 2.54mm Pin header | |
| J2 | 8P 0.5mm FFC/FPC | AFC01-S08FCA-00 |
- DNI: don't install.
- SMD 0603 (Imperial) aka 1608 Metric.
- PMW3610 needs to be used with LM18-LSI lens.
R1is optional/additional RESET pull up resistor, RESET pin of PMW3610 has a built in weak pull up circuit.U2LDO can be replace by RT9193-18GB, changeC10to 22nF.- The wiring order of
J1andJ2is different.
- Copper layer count: 2
- Board thickness: 1.6 mm
- Board overall dimensions: 23.5 x 31.5 mm
- Min track/spacing: 0.15 mm / 0.15 mm
- Min hole diameter: 0.3 mm
- Castellated pads: No
- Edge card connectors: No
- Plated board edge: No
- 3.3V logic
- VIN: 3.3V
- JP1:
[1-2 3]
- 1.8V logic
- VIN: (VDD+0.2V) ~ 5.5V
- JP1:
[1 2-3]
| JP1 | Description | |
|---|---|---|
[1-2 3] |
2 and 1 close, 3 NC | VIO = VIN |
[1 2-3] |
2 and 3 close, 1 NC | VIO = VDD |
[1-2-3] |
1, 2 and 3 close | VIO = VDD = VIN (LDO bypass) |
- VDD: 1.7V~2.1V, 1.8V Typical.
- VDDIO: 1.7V~3.3V, 1.8V Typical.
Available under the CERN-OHL-P v2 permissive license.
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent