This repository contains a pure Rust implementation for the BME680 environmental sensor. The library can be used to read the gas, pressure, humidity and temperature sensors via I²C.
It is a fork of the library written by Marcel Buessing: https://github.com/marcelbuesing/bme680.
To use this library, create a new project and add it as a dependency:
[dependencies]
bme680 = {git = "https://github.com/dnutiu/bme680-rust.git", version = "0.8.0"}
Determine the I2C device path
pi@raspberrypi:~ $ i2cdetect -y -l
i2c-1 i2c bcm2835 I2C adapter I2C adapter
Determine I2C-Address of sensor, 0x76
is the primary address, 0x77
is the secondary address.
If in doubt determine the address via the following command:
pi@raspberrypi:~ $ i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- 76