Forked from Bitcoin Payable

A rails gem that enables any model to have cryptocurrency payments. The polymorphic table coin_payments creates payments with unique addresses based on a BIP32 deterministic seed using https://github.com/GemHQ/money-tree and uses external APIs to check for payments:

• https://etherscan.io
• https://blockexplorer.com
• https://www.blockcypher.com

Supported coins are:

• Bitcoin
• Bitcoin Cash
• Ethereum

Payments have the following states:

• pending
• partial_payment
• paid_in_full
• comped (useful for refunding payments)
• confirmed (enters state after n blockchain confirmations, see confirmations config option)
• expired (useful for auto-expiring incomplete payments, see expire_payments_after config option)

No private keys needed, No bitcoind blockchain indexing on new servers, just address and payments.

Donations appreciated

• 14xXZ6SFjwYZHATiywBE2durFknLePYqHS (Maros Hluska)

Add this line to your application's Gemfile:

gem 'cryptocoin_payable'

And then execute:

bundle
rails g cryptocoin_payable:install
bundle exec rake db:migrate
populate cryptocoin_payable.rb (see below)
bundle exec rake cryptocoin_payable:process_prices (see below)

rails d cryptocoin_payable:install

docker-compose up --build

docker-compose run web bin/cucumber features
docker-compose run web rspec
docker-compose run web rubocop

if you get an error about the database tables not being created, run:

cd spec/dummy
RAILS_ENV=test bin/rails db:schema:load

config/initializers/cryptocoin_payable.rb

CryptocoinPayable.configure do |config|
  # config.currency = :usd
  # config.testnet = true

  config.request_delay = 0.5
  config.expire_payments_after = 15.minutes

  # defaults to STDOUT
  # config.logger = Rails.logger 
  
  config.configure_btc do |btc_config|
    # btc_config.confirmations = 3
    # btc_config.node_path = ''

    btc_config.master_public_key = 'tpub...'
  end

  config.configure_bch do |bch_config|
    # bch_config.confirmations = 3
    # btc_config.node_path = ''

    bch_config.master_public_key = 'tpub...'
  end

  config.configure_eth do |eth_config|
    # eth_config.confirmations = 12
    # eth_config.node_path = ''

    eth_config.master_public_key = 'tpub...'
  end
end

In order to use the bitcoin network and issue real addresses, CryptocoinPayable.config.testnet must be set to false:

CryptocoinPayable.config.testnet = false

Consider adding a request delay (in seconds) to prevent API rate limit errors:

CryptocoinPayable.config.request_delay = 0.5

The derivation path for the node that will be creating your addresses.

A BIP32 MPK in "Extended Key" format used when configuring bitcoin payments (see btc_config.master_public_key above).

Public net starts with: xpub Testnet starts with: tpub

• Obtain your BIP32 MPK from http://bip32.org/

class Product < ActiveRecord::Base
  has_coin_payments
end

def create_payment(amount_in_cents)
  self.coin_payments.create!(reason: 'sale', price: amount_in_cents, coin_type: :btc)
end

CryptocoinPayable also supports local currency conversions and BTC exchange rates.

The process_prices rake task connects to api.coinbase.com to get the latest BTC price for your specified currency. As a fallback, it will connect to api.gemini.com to get the latest price. It then updates all payments that havent received an update in the last 30 minutes with the new value owing in BTC. This honors the price of a payment for 30 minutes at a time.

rake cryptocoin_payable:process_prices

All payments are calculated against the dollar amount of the payment. So a bitcoin_payment for $49.99 will have it's value calculated in BTC. It will stay at that price for 30 minutes. When a payment is made, a transaction is created that stores the BTC in satoshis paid and the exchange rate is was paid at. This is very valuable for accounting later. (capital gains of all payments received)

If a partial payment is made, the BTC value is recalculated for the remaining dollar amount with the latest exchange rate. This means that if someone pays 0.01 for a 0.5 payment, that 0.01 is converted into dollars at the time of processing and the remaining amount is calculated in dollars and the remaining amount in BTC is issued. (If BTC bombs, that value could be greater than 0.5 now)

This prevents people from gaming the payments by paying very little BTC in hopes the price will rise. Payments are not recalculated based on the current value of BTC, but in dollars.

To run the payment processor:

rake cryptocoin_payable:process_payments

Use the coin_payment_partially_paid, coin_payment_paid and coin_payment_confirmed methods

def Product < ActiveRecord::Base
  has_coin_payments

  def create_payment(amount_in_cents)
    self.coin_payments.create!(reason: 'sale', price: amount_in_cents, type: :btc)
  end

  # Runs when the payment is first detected on the network.
  def coin_payment_paid(payment)
    self.notify!
  end

  # Runs when the payment is partially paid
  def coin_payment_partially_paid(payment)
    self.awaiting_full_payment!
  end

  # Runs when enough confirmations have occurred.
  def coin_payment_confirmed(payment)
    self.ship!
  end
end

Every time the payment processor is run, several rows are inserted into the database to record the value of the coin at a given instance in time. Over time, your application will accumulate historical currency conversion data and you may want to clear it out:

rake cryptocoin_payable:delete_currency_conversions

By default, it will delete any data older than 1 month. You can configure this using an env variable:

DELETE_BEFORE=2017-12-15 rake cryptocoin_payable:delete_currency_conversions

This will bypass the payment, set the state to comped and call back to your app that the payment has been processed.

@coin_payment.comp

@coin_payment.expire

Payments will auto-expire if you set the expire_payments_after option. The exact timing is not precise because payment expiry is evaluated whenever payment_processor runs.

coin_payment = @product.coin_payments.first
coin_payment.transactions.find_each do |transaction|
  puts transaction.attributes
end

Only supports bitcoin using BIP-21 at the moment

# initializers/cryptocoin_payable.rb
require 'chunky_png'

CryptocoinPayable.configure do |config|
  config.qrcode = { bit_depth: 1,
                      border_modules: 4,
                      color_mode: ChunkyPNG::COLOR_GRAYSCALE,
                      color: 'black',
                      file: nil,
                      fill: 'white',
                      module_px_size: 6,
                      resize_exactly_to: false,
                      resize_gte_to: false,
                      size: 1200 }
end

or if you dont want qrcode generation

config.qrcode = nil 

Display the qrcode

<%= image_tag coin_payment.qrcode, width: 250 %>

1. Fork it
2. Create your feature branch (git checkout -b my-new-feature)
3. Commit your changes (git commit -am 'Add some feature')
4. Push to the branch (git push origin my-new-feature)
5. Create new Pull Request

• andersonlewin
• krtschmr
• mhluska