samgisaninja / successionrestore Goto Github PK
View Code? Open in Web Editor NEWRestore iOS devices without updating via rootfilesystem DMG
License: GNU General Public License v3.0
Restore iOS devices without updating via rootfilesystem DMG
License: GNU General Public License v3.0
Close this ticket when you figure out how it works; I'm curious too
Just wanted to say thanks after INSTALLING only I attempted to open it and bam Respring and infinite bootloop so thanks for making all my money wasted on the tweaks and donations I’ve gave was forced to update to 12.2 so yeah thx
I've looked through the thread of similar issues and haven't been able to make it work with the few commands that were recommended to use.
Version: 16C5050a - 12.1.1b3
Device: iPad8,3
Jailbreak: Chimera 1.0.4
Succession Version: 1.2.4
IPSW: Local
Bug: Pressing Erase iPhone doesn’t start the restoration
What have I tried so far?
Try rebooting
Downgrade to an earlier version (on my other device with unc0ver, I tried 1.1.6 and 1.2 and only 1.1.6 works, so the bug started in 1.2)
The story:
I pressed Erase iPhone (at the bottom), then it an alert said “ Mounting Filesystem... “. Then I pressed OK and it still stays in the Erase iPhone screen, not doing anything.
I can’t downgrade to 1.1.6 because it doesn’t support A12X/Chimera. I don’t want to use Restore rootFS because I want to cleanly wipe my iPad.
All the sites I have tried signing the ipa with says the Info.plist file is missing. I know the file is there, but maybe theres something wrong with it?
iPhone 11,6; A12; iOS 12.0; Build 16A366; Sucession Version 1.3.1
Button after IPSW Download does nothing tried rebooting 2h or so but no chance...
Hi,
I got an issue with Succession 1.3.2, i use an iPhone XS so A12 on iOS 12.1.2 and i want to start on a new clean base without anything for creating a good jailbreak setup that is conveniant for my usage because for the moment it's not what i exactly want anyway.
I doens't touch the settings like "use Test mode" or anything like that just press downloaded the ipsw with the app and use it but when i press erase iphone i got the pop-up about mouting filesystem can fail, but i press ok and nothing happen so is it an issue with my device or with the tweak ?
Thanks in advance for your answer.
When using Succession 1.3.5 to restore rootFS on 11.0.3, Succession displays "mounting filesystem tap OK to continue". when pressing OK, nothing happens.
Downgrading to 1.3.4 worked perfectly!
Log:
[SUCCESSIONLOG 1.3.5: 2019-08-19 05:20:19 +0000] Line 27: RestoreViewController has loaded!
[SUCCESSIONLOG 1.3.5: 2019-08-19 05:20:20 +0000] Line 185: prepareAttachRestoreDisk called!
[SUCCESSIONLOG 1.3.5: 2019-08-19 05:20:20 +0000] Line 189: Read fstab! /dev/disk0s1s1 / apfs ro 0 1
/dev/disk0s1s2 /private/var apfs rw,nosuid,nodev 0 2
/dev/disk0s1s3 /private/var/wireless/baseband_data apfs rw,nosuid,nodev 0 2
[SUCCESSIONLOG 1.3.5: 2019-08-19 05:20:20 +0000] Line 196: Identified filesystem type as APFS! apfs
[SUCCESSIONLOG 1.3.5: 2019-08-19 05:20:20 +0000] Line 207: attachRestoreDisk called!
[SUCCESSIONLOG 1.3.5: 2019-08-19 05:20:20 +0000] Line 218: hdik output is:
[SUCCESSIONLOG 1.3.5: 2019-08-19 05:20:20 +0000] Line 220:
[SUCCESSIONLOG 1.3.5: 2019-08-19 05:20:20 +0000] Line 222: current line is
[SUCCESSIONLOG 1.3.5: 2019-08-19 05:20:20 +0000] Line 66: startRestoreButtonAction called
[SUCCESSIONLOG 1.3.5: 2019-08-19 05:20:20 +0000] Line 105: no apfs snapshot operations requested
[SUCCESSIONLOG 1.3.5: 2019-08-19 05:20:20 +0000] Line 111: showRestoreAlert called!
[SUCCESSIONLOG 1.3.5: 2019-08-19 05:20:20 +0000] Line 144: Filesystem is not mounted, showing mount alert now
[SUCCESSIONLOG 1.3.5: 2019-08-19 05:20:21 +0000] Line 149: mountingAlert handler called, identified theDiskString as (null)
[SUCCESSIONLOG 1.3.5: 2019-08-19 05:20:21 +0000] Line 554: ERROR! unable to identify theDisk, neither (null) or (null) existed
I've looked everywhere for an answer to this. My phone has been having issues so I wanted to restore it.
I have an iPhone 7+ On 12.1.2 jailbroken with u0 3.0.1, and I am using Succession 1.2.4. After downloading the IPSW, when I go to restore my iPhone it says, "Attach failed, exit code 5 (hopefully his will never happen because I will have no clue how to debug it)."
There is a big issue with this. a Jailbreak/Kernel Exploit does not give us access to the AES engine, which means we need a bootchain (SecureROM, iBoot, iBSS, iBEC, etc) exploit to give us access to the AES engine and thus be able to decrypt the DMG. If you used OTA updates, this restriction would be eliminated.
Activation failed after restore on iPhoneSE, either directly connected to wifi activation or connected to a computer using iTunes activation, or using tools such as 3UTools. (Don't worry about me, I have used futurerestore to restore the system and can activate it afterwards.) I suspect it is related to my baseband version, because I am currently using 12.2 sep+baseband with iOS12.1.1.
Hey I recently found your tweak and wonders if for A12 it would be possible to also update from like 12.0.1 to like 12.1.2.
I had blobs they are invalid bc i didn’t knew I had to add my own appnonces.
Hope to hear from you soon! I’m impressed by your work!
This has been reported to me via Discord, email, and reddit, so I figured I'd just log that this exists, can probably fixed by using chmod 0777 /var/mobile/Media/Succession/
, this mitigation will be implemented in Succession 1.1
iPhone10,3 (iPhone X GSM) running 12.1.2
After restore, the touch screen is completely unresponsive. Probably some file that needs to be excluded that isn't.
Unfortunately there's no real way for me to do a "project-unbootloop" style method of finding this file as using futurerestore breaks Face ID due to incompatible Savage. This might prevent release for a long time.
This bug is confirmed present on the iPhone X and confirmed absent on the iPhone 5s (and probably absent on the iPhone SE, or #10 wouldn't exist). Anyone who tries this on any device other than the 3 I've already confirmed it on, please comment below.
how can i solve this message
https://www.dropbox.com/s/w9behvj86zodef5/photo_2019-09-02_10-49-41.jpg?dl=0
i am use succession 1.3.8
On iPad mini 4 Wifi 12.1.1. After downloading and extracting the IPSW it is displayed for a long time "retrieving download". Several minutes later, when I press "Back" in the "Download complete" Popup, I am redirected to the home, it's still marked "Download clean file system" without any possibility to restore. After checking there is nothing in /var/mobile/media/succesion.
Upon opening the "Special Thanks" section, it does not allow the Back function.
[version I plan to implement them in in hard brackets]
orig-fs
apfs snapshot after the restore is complete to allow snapshot-based restore tools such as pwn20wndstuff/Rollectra11 to be used after the restoreeven tho changelog states it fixes it, actually it isn't. did at least 10 reboots and no luck.
6S, 12.1.2, unc0ver b49
It work good on my iP X iOS 12.4
ios 12.1.2 iphone 8 plus. Been trying all the successions and the latest deb of 1.1.2 acts like it is working after rebooting and trying over after 1-3 times. Says it "successfully restored" or something along that lines and shows the apple logo and a progress bar, but after a couple seconds it resprings and then I am brought back to my homescreen unjailbroken. I reboot and gotta reinstall everything even though trying to do a full restore. Also sometimes it gets the mounting bug
所有ios10-10.3.3系统 Meridian越狱的 用SuccessionRestore平刷 刷完重起 数据还在 没有抹去是什么原因呢?
no changes made after restoring , no setup screen , test mode is off
wat do
No matter how many times I try to run it, it’ll always freeze there. I’ve left it overnight with no success. I’ve tried to use 1.3.7, but I still get the Mounting Filesystem information. iPhone 5S, iOS 10.3.3. If I hard reboot (probably not the best thing to do but it’s either reboot or leave it at that), then my installed apps will all crash upon launch and not work (defaults still work). Sideloading and jailbreaking my device again works fine, but if I try to run Succession then this happens again
crash when i click on erase phone(ipad pro ios 12.1)
I have error with new version 1.3.5 on 6s+ and ios 12.0. Help me pls :(
https://www.dropbox.com/sh/vrwdr0ssvqk1b9p/AAC9jBA3n2i-knrEYsdLBV3Da?dl=0
Hi, I have a lot of exams in the past, I am sorry that there is no timely feedback.
Failed to restore my iPad (12.1.1) using Succession version 1.3.3. Nothing happens after tapping OK. I followed your instructions (mount 'disk4s2s1' to 'mnt1'), and successfully restored my iPad. Then I tried the second time, I met a new problem that was no permission to make the "mnt1" in "MobileSoftwareUpdate", but it was solved with the help of Halo-Michael.
I hope these feedbacks can help you, of course, thank you very much.
I've an iPad 4,2 with iOS 12.0.1 and Succession updated to latest version (1.3.2). I tried to download custom ipsw and downloading it from the Succession itself; in both of cases when i click on "Erase iPhone", a popup message showup telling me "Mounting Filesystem - This step might fail..." and it fail.
I tried many many time rebooting the device, but the same result happen everytime, even trying to re-jailbreak and uninstalling and re-installing succession itself.
Could you please help me understanding what's is wrong or where i'm wrong?
Regards.
Hi man,
after downloading the .ipsw file of iOS 12.0.1 and put in the Succession folder, i start the unzipping process but after very very long time i saw that's stucked on "Identifying rootfilesystem dmg".
I've successfully installed, recently, the latest version of Succession.
Could you please help me understanding what's happening and how to solve that?
Regards
When downloading an ipsw would like to exit the application and do other things(watch youtube) while it's being downloaded, could have the application create a daemon service for background processes then push notification on successful download event or something like that.
Would like releases deb packages here via the releases option
Version: 12.1.1 (16C50)
Device: iPad7,5
Jailbreak: unc0ver version 3.0.1
Succession Version: 1.3
IPSW: provided or downloaded
I pressed Erase iPhone (at the bottom), then it an alert said “ Mounting Filesystem... “. Then I pressed OK and it still stays in the Erase iPhone screen, not doing anything.
I don’t want to use Restore rootFS because I want to cleanly wipe my iPad.
I am on iphone x ios 12.1.2 and after i tap on prepare for restore y got the following message:
Error Attaching image failed because hdik returned no output
When I press go I get no further.Copy of log file if it helps.
[SUCCESSIONLOG 1.3.4: 2019-07-12 02:52:48 +0000] Line 31: RestoreViewController has loaded!
[SUCCESSIONLOG 1.3.4: 2019-07-12 02:52:49 +0000] Line 189: prepareAttachRestoreDisk called!
[SUCCESSIONLOG 1.3.4: 2019-07-12 02:52:49 +0000] Line 193: Read fstab! /dev/disk0s1s1 / apfs ro 0 1
/dev/disk0s1s2 /private/var apfs rw,nosuid,nodev 0 2
/dev/disk0s1s3 /private/var/wireless/baseband_data apfs rw,nosuid,nodev,nobrowse 0 2
[SUCCESSIONLOG 1.3.4: 2019-07-12 02:52:49 +0000] Line 200: Identified filesystem type as APFS! apfs
[SUCCESSIONLOG 1.3.4: 2019-07-12 02:52:49 +0000] Line 211: attachRestoreDisk called!
[SUCCESSIONLOG 1.3.4: 2019-07-12 02:52:49 +0000] Line 216: attach returned 5
[SUCCESSIONLOG 1.3.4: 2019-07-12 02:52:49 +0000] Line 218: attached to aka
[SUCCESSIONLOG 1.3.4: 2019-07-12 02:52:50 +0000] Line 70: startRestoreButtonAction called
[SUCCESSIONLOG 1.3.4: 2019-07-12 02:52:50 +0000] Line 109: no apfs snapshot operations requested
[SUCCESSIONLOG 1.3.4: 2019-07-12 02:52:50 +0000] Line 115: showRestoreAlert called!
[SUCCESSIONLOG 1.3.4: 2019-07-12 02:52:50 +0000] Line 148: Filesystem is not mounted, showing mount alert now
[SUCCESSIONLOG 1.3.4: 2019-07-12 02:52:50 +0000] Line 153: mountingAlert handler called, identified theDiskString as
[SUCCESSIONLOG 1.3.4: 2019-07-12 02:52:50 +0000] Line 542: ERROR! unable to identify theDisk, neither s2s1 or s2 existed
Device information: iPhone 5s (iPhone6,1) on iOS 10.2 (Build 14C92)
I am using Succession v1.3.5 from the BigBoss repo
At first I didn't have enough space when I was downloading the IPSW, so I freed some space up and removed contents inside var/mobile/media/Succession.
Afterwards, my app crashed when it was attempting to unzip the IPSW so I gave up letting the app handle it and I manually extracted the DMG file myself. What I did was download the respective IPSW and used TransMac to retrieve the DMG. I followed instructions I found on Reddit that said to open the IPSW and find pull the largest DMG file within, and open it with TransMac and expand (extract) that. Then I transferred it to my device and tried restoring once more.
As the title says, when I click "Prepare to restore!", my app immediately crashes, and there is nothing helpful within my logs.
Logs:
[SUCCESSIONLOG 1.3.5: 2019-08-20 04:30:42 +0000] Line 27: RestoreViewController has loaded!
I should note that my device no longer has access to my carrier's network as I have a new phone. When I activated the new one, the sim on my old phone automatically stopped working, so i never bothered taking it out. I did try running Succession on airplane mode and that didn't help
Will need to look into this further, but either the DMG isn't being attached, or Succession isn't able to find it
How to fix
Failed to create mountpoint. you don't have permission to save the file "mnt1" in the folder "MobileSoftwareUpdate"
When I click on the message: "Mounting filesystem ... Tap OK to continue" nothing happens.
iPhone Xs Max, iOS 12.1.2, Succession 1.3.3
Trying to restore my iPhone but nothing happens when I press “Erase iPhone”. Rebooted multiple time and even downloaded the ipsw.
iPhone 11,6
iOS 12.1.1
iOS Build 16C50
When I click on the message: "Mounting filesystem ... Tap OK to continue" nothing happens.
Iphone 8 Plus (GSM) Ios: 12.2
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.