rrorg / rr Goto Github PK
View Code? Open in Web Editor NEWRedpill Recovery (arpl-i18n)
License: GNU General Public License v3.0
Redpill Recovery (arpl-i18n)
License: GNU General Public License v3.0
由于我是AMD EPYC 很多intel机型不能启动 DSM里面虚拟机。于是我是机器安装的黑裙
7.2正式版 能开机进入dsm初始化,初始化重启后机器自动关机。
7.1版本 不能进入dsm web 界面。
我机型给原机型差不多 是 超微 H11SSL+7282 麻烦查看修复一下 谢谢。
Today I updatet ARPL-i18n by the update function of the loader. But when rebooting the bootloader wasn't found. I had to use the new VMDK flat file and reconfigure ARPL-i18n from scratch.
我在使用最新的23.5.3和23.5.5引导时,当通过直通卡2308或者3108连接硬盘时出现异常表现在:当连接的硬盘数超过26个(包含启动盘),在引导出现 Autmated RedPill loader,arpl login:root(automatic login) 时,出现Loader disk not found!然后整个引导停下来,我检查了一下,就是如果挂载的硬盘超过 /dev/sdz,既/dev/sdaa、/dev/sdab。。。 后就会出现这个异常就是超过26个盘符后就会出现,同时发现超过26个硬盘就没办法挂载启动盘的3个分区到/mnt/p1、/mnt/p2、/mnt/p3下,所以找不引导盘,所以我认为这是一个逻辑上的bug,可能死没考虑到硬盘超过26个后,硬盘挂载的名字从sdz三位数变成sdaa四位数。我不知道怎么修改,望可以更新
Hello, friends! On a baremetal laptop HP x360 Pavilion ba103ur (connected via USB3.0-LAN Adatep D-Link DUB-1312, also tried TP-link) the problem - after a certain period of time (after determining the IP address and DSM kernel boot), the device disappears in the router.
If i boot in config bootloader mode, then the network does not disappear. This happens after loading DSM. I've already tried disabling the "cdc ncm" module, but that doesn't help. Thanks for any help!
想把sata口改成esata口,修改esataportcfg、internalportcfg参数不生效,查看系统配置参数是已经写入啦,但是不生效。
DSM 7.2 RC was recently released:
https://www.synology.com/en-us/support/download/DS1621xs+?version=7.2#system
7.2 build 64551 RC
Anyone tried updating already? Is it safe without updating the ARPL loader?
Hello all,
like with arpl I have the same issue with passthroughed physical LSI SAS controller.
See my posts here: fbelavenuto/arpl#721
Kind Regards
Hi @wjz304, i think we have a big issue in redpill-lkm. If we add a lsi sas controller, the drives sometimes disapear or are not able to acces requests. it looks like, it's caused by redpill-lkm. Do you know a solution?
测试环境:esxi8.0 u1
系统版本:DSM7.2
引导会屏蔽第二个sata控制器的前两个端口(31,32),第三个控制器的前4个端口(61,62,63,64)。一般直通硬盘控制器的话是占用第二个sata控制器,屏蔽两块盘会导致raid5阵列直接损毁。
Hello.
I tried using apollolake-4.4.302.tgz file in my M SHELL for TCRP in the modules.zip you compiled.
M SHELL for TCRP DSM 7.1 used arpl-modules directly.
Currently, I am also using arpl-modules that I compiled myself after forking.
However, apollolake-4.4.302.tgz made with the 7.2 compiler prepared by fabio had an unknown symbol and invalid module format issue.
That issue I confirmed with pocopico a few weeks ago.
I tried using your apollolake-4.4.302.tgz on TCRP DSM 7.2 RC and DS1019+ and the junior log gave the same " invalid module format, unknown symbol".
In your arpl all modules work without this "unknown symbol" message?
It looks like you used the 7.1.1-42961-1 config.json I built.
However, because the Small FIX version has changed
If you proceed with 7.1.1-42962 during the DSM installation process,
It doesn't point to the 7.1.1 latest version of that version, it points to the 7.2 RC version.
like below
Adjustment of rss.json and rss.xml is required.
PeterSuh-Q3/redpill-load@1270c03
PeterSuh-Q3/redpill-load@85c4a63
I already separated 7.0.1 / 7.1.1 / 7.2.0 into folders like below.
https://github.com/PeterSuh-Q3/redpill-load/tree/master/rss
The result of testing in this way
It has been confirmed that DS923+ and DS918+ operate normally.
The peculiarity is that DS923+ should point to U5 information, but it works together without problems with GM's setting.
Below is the GM buildphase information related to .VERSION U5 / U1 of the two models.
Please note.
./VERSION
majorversion="7"
minorversion="1"
major="7"
minor="1"
micro="1"
productversion="7.1.1"
buildphase="GM"
buildnumber="42962"
smallfixnumber="5"
nano="5"
base="42962"
packing="NM-nano"
packing_id="22"
derived="NM-nano"
derived_id="22"
builddate="2023/04/08"
buildtime="03:35:17"
unique="synology_r1000_923+"
extractsize=850836
partitionversionlimit=0
syno_supported_hwrevision="r0"
indexdbextractsize=1408
synohdpackimgextractsize=23508
packages=FileStation,SynoFinder,USBCopy,HighAvailability,OAuthService,SMBService,ScsiTarget,ActiveInsight,DhcpServer,SecureSignIn,HybridShare,Python2,BackupRestoreManager
packagerootextractsize=260500
packagevolumeextractsize=0
./VERSION
majorversion="7"
minorversion="1"
major="7"
minor="1"
micro="1"
productversion="7.1.1"
buildphase="GM"
buildnumber="42962"
smallfixnumber="0"
nano="0"
base="42962"
builddate="2022/09/22"
buildtime="18:00:57"
unique="synology_apollolake_918+"
extractsize=840820
partitionversionlimit=0
syno_supported_hwrevision="r0"
indexdbextractsize=1412
synohdpackimgextractsize=23508
packages=FileStation,SynoFinder,USBCopy,HighAvailability,OAuthService,SMBService,ScsiTarget,ActiveInsight,DhcpServer,SecureSignIn,HybridShare,Python2,BackupRestoreManager
packagerootextractsize=260520
packagevolumeextractsize=0
update.zip的升级包怎么使用
物理黑裙,n5105,板载rtl8111h。
最开始用jim的引导,构建重启找不到ip,通过安装模式下root登录发现module只有r8168,没有r8169,并且没有办法加载r8169,提示no symbol不拉不拉。百度说是有前置module,试了一遍还是不行,但是碰巧发现在加载8125和mii之后可以加载r8152驱动,直接京东了一个rtl8153的usb网卡,可以装系统,但是重启之后就失联了。
转用你的arpl-i18n 23.5.5,装的920+,板载网卡直接就能装,ssh看了一下确实是有r8169驱动的。一直正常使用
今天来看看有没有加sa6400,然后复现了jim引导的所有问题,板载的装不了系统,usb网卡可以装系统但是重启失联,但是显示器上是有eth1 ip的
使用的是最新23.5.0中的插件,计划任务中未显示相关任务,ssh运行/usr/bin/arpl-reboot.sh "config"命令重启后直接进入了群晖,没有进入arpl
thx!
你好,我尝试在我的MAG B460M MORTAR主板上安装群晖 7.2-64551RC,引导之后好像不能用,不知道是不是网卡不能识别。
https://www.msicn.com.cn/Motherboard/MAG-B460M-MORTAR/Specification
网卡:1x Realtek® RTL8125B
请问怎么解决?谢谢
Model: DS920+
Build: 42962
*** Detected 1 network cards, but only 0 MACs were customized, the rest will use the original MACs. ***
可以检测到ip,但是连接不上
I was wondering, would it be possible to also have the router version of DSM (SRM) installed in a similar way throught ARPL?
Could be interesting to buy a board like this and use it as a highspeed router: https://zimaboard.com
B365+i9-9900
The UPS does not work on DSM version 7.1.1-42962 Update 5 DS1621+. The UPS connected to usb is not visible. On version 6.2.3, the UPS worked completely. Help solve the connection problem. UPS Model: APC Back-UPS RS 800.
4块直通硬盘,只能看到33和34号盘,35和36显示不出来,之前可以通过grup里面的参数修改硬盘位置,请教一下现在的版本如何修改硬盘位置?
用ESXI 7.0 U3安装DS918+ 6.2.4-25556,安装以后无限还原,按网上所说的断网方法试过了,没有什么用。用23.4.2和23.4.3都是这样,不知道是引导问题还是什么东方没设置对。
Running the following setup:
Hardware config:
Issue:
Everything seems to be running just fine. The only issue I ran into is that even though assigning 6 cores and 16gbs of ram to a Windows VM within VMM, it only just uses up to 4/5% of CPU power max. The VM, however, is super slow. I see no way to increase this. Any suggestions or any underlaying tweaks I could apply? Maybe the /usr/local/bin/qemu-system-x86_64
gets limited or something?
试过原版的arpl和arpl-i18n, 还试过几种其他引导,经常会丢失连接,具体现象有:
编译成功后网卡灯灭,Ping不通,群晖助手找不到,5000端口无法访问
编译成功后网卡灯亮,Ping得通,但群晖助手找不到,5000端口无法访问
重启后获取不到Ip,eth0 error ,访问不了
重启后能获取到Ip,但网卡灯灭,Ping不通,群晖助手找不到,当然也无法访问
【还有能获取到IP,网卡灯亮,Ping得通,但找不到,5000端口无法访问的情况】
网卡是集成网卡intel i217-v , 只有这一个网卡
CPU : E5-1265L V3
主板:华擎IMB-183(H81芯片组)
内存:DDR3 1600 8g
硬盘:msata1 普通机械硬盘2
U盘引导
背景:
最近老的引导崩了(无法引导),于是我尝试了23.5.0,一路next后直接选择了boot
首次进入https://finds.synology.com 后,手动下载了DS3622xs-build42962进行安装,然后就一直在的重启提示recover之间循环,求助!
今天编译出现这个错误,昨天一切正常成功安装好一个群晖,版本23.4.4,PVE虚拟机。谢谢
Hello,
Requesting shutdown from Proxmox GUI does not work.
The request is not triggered.
From Proxmox :
TASK ERROR: VM quit/powerdown failed - got timeout
I'm trying to build a DS918 on dsm 25556 but I get an infinite "update required before continuing". I've tried to disconnect internet, before uploading base dsm 25556, still get the same message. Bare metal specs are i3 gen4 and 16gb ram.
Please advise. I need this version (dsm 25556-u7). Thank you.
你好 我用arpl,918/920可硬解但是无法加载pcie 10g网卡,3622可加载10g网卡,但是无法硬解。可以920加载pcie 10G网卡嘛
#31 same
model: 3622+
version: 64561
NIC: BRCM 10GbE 2P 57810S-t
(1)配置完成后启动失败,需要手动关机在开机才能进入。
(2)引导时显示器显示乱码,远程web界面正常。
在arpl中添加了reboottoarpl插件重启进入计划任务也没有相应的任务。是怎么回事?
家里有一个蜗牛D的机器,一直用来放照片的。用JUN大的7.0.1的引导,一直到现在也随着群晖的升级到7.1.1 U5都是可以正常引导的,唯一的遗憾就是经常会出现无法关机的情况。用您的所有版本,要么第一次启动的时候找不到硬盘(已经设置了DiskIdxMap=0001,SATA1号口装了一个120GSSD SATA,其他扩展的4个口装了4个2TB机械),要么就是找到硬盘后装好系统也能进入桌面一次,仅仅只有一次能进入桌面,再重启后网卡灯始终亮不起来,不知道哪个环节出了问题,请赐教!
编译完成后怎样导出为img或iso备份
检测到 1 个网卡, 但是仅自定义了 0 个 MACs, 其他网卡将使用自身 MACs
有这么一句黄色的
我估计是 真实的Mac地址给了eth1 实际上应该是给单网卡的 eth0
我在网上发现很多和我一样的问题
N100 CPU
上一版RC1 没问题。
when booting from USB to configure the Loader eth0 works fine and get IP and i can configure hte loader. However when going to boot from the loader it failes to get MAC Addresses and then when trying to find IP's on eth0 and eth1 it fails with ERROR and then the screen locks up as normal to boot DSM.
HP Microserver G10, DSM 7.1.1-42962Update5
您好,大神,在编译程序插件里面没有8代10代的核显驱动啊?
if bnx2x-e2-7.12.30.0.fw file is in /lib/firmware/bnx2x location, it works.
EXSI7.0环境下,通过HBA330(DELL) 直通硬盘,也尝试用H310(DELL 直通卡)安装DS3620XS+一点问题没有,所有硬盘都能正常识别。但是安装DS918+死活不认盘,总是提示找不到硬盘。是因为DS918+没有阵列卡的驱动吗?
如题,我从6.2.3升级到最新的7.2RC,用U盘引导7.2RC,BIOS启动设置为win8,以前的引导6.2.3的msata硬盘还在主板上没拔下来,目前启动顺序为U盘第一,现在就是关机之后等两秒左右马上就会再次开机。尝试了关闭WOL唤醒和修复电源后自动启动也一样自动重启。请问是否需要把旧的msata引导盘拔下来?或者现在的引导会不会有问题?
i installed DS3622+ with console addon
when i boot the dsm
stuck "BOOTING..." PAGE
model: 3622+
version: 54551
NIC: BRCM 10GbE 2P 57810S-t
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.