rovitotv / buddytablet Goto Github PK

https://www.raspberrypi.com/news/raspberry-pi-os-debian-bullseye/

Looks like an exciting release….still recommended 32 bit only.

BuddyTablet had a fall on the carpet and the screen rails failed. They are obviously too thin so make them thicker and reprint.

• bottom of case is not level
• too many screws
• confirm screw holes are of the right size

• Create blender script that will automatically make STL files
• Will automate doing a release

When I try and edit the network settings I get an error message "Error saving /etc/dhcpcd.conf the dhcpcd configuration tile is not writeable"

What does that mean?

• consider using zip ties
• take some pictures of the inside
• can we find a shorter SATA to USB cable?

This is not easy that is for sure....

Currently we are "drilling out" some holes....

I am not sure what is going on when I unplug the monitor it does not go away it is still present at least virtually. The opposite is try when I plug it in the monitor doesn't automatically start working.

• What happens when BuddyTab gets dropped on the ground and the ground is hard?
• Can we use more of a rubber material?
• Don’t have to do this right away