robertgawron / geigermullercounter Goto Github PK

Sorry to bother you but I built the Arduino based geiger counter using a nokia 5110 display but it looks like the software has since been removed from github under this tree

Would you be willing to send me the source code or add it to a repository?

Thank you
James

Projecy: https://robertgawron.blogspot.com/2016/07/using-arduino-to-process-data-from_24.html

Store data on the SD card or in EEPROM, provide way to download the data to the PC.

File name gm_defines.h

Add info about HardwareDataLogger sub-project.

Graph is needed to better visualize results.

Lib: http://stm32f4-discovery.com/2014/07/library-21-read-sd-card-fatfs-stm32f4xx-devices/

Fix according to capacitor type/package used.

What should be the max power of the transistor?

From one point it should be named just a Counter (DRY, it's obvious it's GM Counter). From other point, it should have GM prefix when imported to FreeCAD (in https://github.com/RobertGawron/CosmicRayDetector ), to point what Counter it is.

It's a separate module, even it's project is a separate git sub-tree.

Sorry to bother you, but I want to make a geiger detection suite for the main chip using stm32. Can I get a circuit diagram from you? Thank you

Framework: Check
http://check.sourceforge.net/

Please provide what zener diode should be used

Hi,

sorry to bother you here. I was looking for your contact on your website, but there is none.

Anyway, I found your project very interesting. In fact, I have one SBM-20 Geiger tube (I planned to build my own Geiger counter a few years ago, but never finished it). What is the difference between this and your STS-5 tube?

Also, where did you find metallic holders for lamps? Do you have a figure (picture of a prototype) of the circuit and list of required materials?

And the final question - did you plan to make a digital Geiger counter based on Raspberry Pi?

P. S. My e-mail can be found here: https://keyserver.ubuntu.com/pks/lookup?op=get&search=0xBEA5286DA9CF4A88

Regards,
M.

Based on HC-05 board.

For tests the dummy data is hard-coded into the script, the data should be read from real results.