robbiefish / ros2_mscl Goto Github PK

IMPORTANT: This is a beta release of the ROS2 driver! Please report any issues via the Github issues page

This is the ROS2 Interface (driver) software for inertial sensors compatible with the Microstrain Communication Library (MSCL).

MSCL is developed by LORD Sensing - Microstrain in Williston, VT.

IMPORTANT: You will need to copy /usr/share/c++mscl/libmscl.so to /usr/lib manually for now as the ROS2 build environment cannot locate it. We are looking into this.

MSCL pre-built packages can be found here: MSCL Packages

We do our best to keep ROS2-MSCL up-to-date with the latest MSCL changes, but sometimes there is a delay. The currently supported version of MSCL is v62.0.0

Install instructions can be found here: How to Use MSCL

If you choose to install MSCL at a location other than /usr/share, CMakeLists.txt will need to be updated with the install path.

1. Install ROS2 and create a workspace: Configuring Your ROS2 Environment

2. Move the entire ROS2-MSCL folder (ros_mscl and mscl_msgs) to the your_workspace/src directory.

3. Build your workspace:

    cd ~/your_workspace
    colcon make
    source ~/your_workspace/install/setup.bash
   

   The source command may need to be run in each terminal prior to launching a ROS node.

The following command will launch the driver. Keep in mind each instance needs to be run in a separate terminal.

    ros2 launch ros_mscl microstrain_launch.py

Some optional launch parameters:

• name: namespace the node will publish messages to, default: gx5
• port: serial port name to connect to the device over, default: /dev/ttyACM0
• baudrate: baud rate to open the connection with, default: 115200
• imu_rate: sample rate for IMU data (hz), default: 100

To check published topics:

ros2 topic list

This driver is implemented as a lifecycle node. Upon running, the node will be in the unconfigured state and no interaction has occurred with the device. The node must be transitioned as follows for data to be available:

• transition to configure state:

    ros2 lifecycle set /gx5 configure
  

• transition to active state:

    ros2 lifecycle set /gx5 activate
  

You can stop data from streaming by putting the device into the "deactivate" state. Both the "cleanup" and "shutdown" states will disconnect from the device and close the raw data log file (if enabled.)

ROS2-MSCL is released under the MIT License - see the LICENSE file in the source distribution.

Copyright (c) 2021, Parker Hannifin Corp.