How to setup Kamailio + RTPEngine to enable PSTN calling from Skype for Business/Lync. This configuration currently only supports SIP over TCP and unencrypted RTP. It is able to handle multiple domains from multiple mediation servers.

This setup is for Debian 9 Stretch.

This setup handles the green boxes in the diagram only.

All files needed to setup all components on Debian 9 Stretch.

git clone https://github.com/havfo/Skype-Kamailio-PSTN-gateway.git
cd Skype-Kamailio-PSTN-gateway
find . -type f -print0 | xargs -0 sed -i 's/XXXX-XXXX/PUT-FQDN-OF-YOUR-SIP-SERVER-HERE/g'
find . -type f -print0 | xargs -0 sed -i 's/XXX-XXX/PUT-IP-OF-YOUR-SIP-SERVER-HERE/g'

This will do the RTP handling.

The easiest way of installing is to get it from Sipwise repository:

echo 'deb http://deb.sipwise.com/spce/mr7.1.1/ stretch main' > /etc/apt/sources.list.d/sipwise.list
echo 'deb-src http://deb.sipwise.com/spce/mr7.1.1/ stretch main' >> /etc/apt/sources.list.d/sipwise.list
apt-get update
apt-get install -y --allow-unauthenticated ngcp-keyring
apt-get update
apt-get install -y ngcp-rtpengine

After you have successfully installed RTPEngine, copy the configuration from this repository.

cd Skype-Kamailio-PSTN-gateway
cp etc/default/ngcp-rtpengine-daemon /etc/default/
cp etc/rtpengine/rtpengine.conf /etc/rtpengine/
/etc/init.d/ngcp-rtpengine-daemon restart

RTPEngine handles the chain for itself, but make sure to not block the RTP-ports it is using. Take a look in iptables.sh for details, and apply it by doing the following. This will persist after reboot. You can run the iptables.sh script at any time after it is set up.

cd Skype-Kamailio-PSTN-gateway
chmod +x iptables.sh
cp etc/network/if-up.d/iptables /etc/network/if-up.d/
chmod +x /etc/network/if-up.d/iptables
touch /etc/iptables/firewall.conf
touch /etc/iptables/firewall6.conf
./iptables.sh

apt-get install kamailio kamailio-mysql-modules kamailio-tls-modules mysql-server
cd Skype-Kamailio-PSTN-gateway
cp etc/kamailio/* /etc/kamailio/
kamdbctl create

Select yes (Y) to all options.

/etc/init.d/kamailio restart

Insert the kamailio.sql into mysql using something like:

mysql -u root -p < kamailio.sql

Take a look in kamailio.sql for examples of numbers/domains/mediation servers/proxies.

To add a mediation server:

1. INSERT the mediation server into address table with grp field set to something in the range 300 -> 399
   • Note: If you have a Skype for Business site/pool with several mediation servers, add them with the same grp field
2. INSERT the number series belonging to the mediation server (pool/site) into carrierroute table with rewrite_host set to the skype-sip-domain the number series belongs to
3. INSERT the mediation server into dispatcher table with setid field set to same number chosen for the grp field in the address table
4. INSERT the SIP domain of the number series into domain_lookup table with groupid field set to same number chosen for the grp field in the address table

By default, outbound calls from Skype for Business are dispatched to dispatcher group 200. Take a look in kamailio.sql for examples on adding a proxy.

1. Configure PSTN GW in topology builder using TCP and port 5065
2. Configure trunk in Skype for Business/Lync Control Panel > Voice Routing > Trunk Configuration
   • Change "Encryption support level:" to Disabled
   • Change "Refer support:" to None
   • Make sure "Enable media bypass" is unchecked
   • Make sure "Centralized media processing" is checked
   • Make sure "Enable RTP latching" is unchecked
   • Make sure "Enable forward call history" is checked
   • Make sure "Enable forward P-Asserted-Identity data" is checked
   • Make sure "Enable outbound routing failover timer" is checked
3. Configure voice route in Skype for Business/Lync Control Panel > Voice Routing > Voice Policy/Route/PSTN Usage
   • The voice route supports all types of forwarding/delegation/park and so on

Call in/out to/from a Skype for Business user and make sure you use full E164 number format in your dial-plans.