CLI tool which enables you to login and retrieve AWS temporary credentials using with ADFS or PingFederate Identity Providers.
This is based on python code from How to Implement a General Solution for Federated API/CLI Access Using SAML 2.0.
The process goes something like this:
- Setup an account alias, either using the default or given a name
- Prompt user for credentials
- Log in to Identity Provider using form based authentication
- Build a SAML assertion containing AWS roles
- Optionally cache the SAML assertion (the cache is not encrypted)
- Exchange the role and SAML assertion with AWS STS service to get a temporary set of credentials
- Save these credentials to an aws profile named "saml"
- saml2aws
- Table of Contents
- Requirements
- Caveats
- Install
- Autocomplete
- Dependency Setup
- Usage
- Example
- Advanced Configuration
- Advanced Configuration (Multiple AWS account access but SAML authenticate against a single 'SSO' AWS account)
- Advanced Configuration - additional parameters
- Building
- Environment vars
- Provider Specific Documentation
- Dependencies
- Releasing
- Debugging Issues with IDPs
- Using saml2aws as credential process
- Caching the saml2aws SAML assertion for immediate reuse
- Okta Sessions
- License
- One of the supported Identity Providers
- ADFS (2.x or 3.x)
- AzureAD
- PingFederate + PingId
- Okta
- KeyCloak + (TOTP)
- Google Apps
- Shibboleth
- F5APM
- Akamai
- OneLogin
- NetIQ
- Browser, this uses playwright-go to run a sandbox chromium window.
- Auth0 NOTE: Currently, MFA not supported
- AWS SAML Provider configured
Aside from Okta, most of the providers in this project are using screen scraping to log users into SAML, this isn't ideal and hopefully vendors make this easier in the future. In addition to this there are some things you need to know:
- AWS defaults to session tokens being issued with a duration of up to 3600 seconds (1 hour), this can now be configured as per Enable Federated API Access to your AWS Resources for up to 12 hours Using IAM Roles and
--session-duration
flag. - Every SAML provider is different, the login process, MFA support is pluggable and therefore some work may be needed to integrate with your identity server
- By default, the temporary security credentials returned do not support SigV4A. If you need SigV4A support then you must set the
AWS_STS_REGIONAL_ENDPOINTS
enviornment variable toregional
when callingsaml2aws
so that aws-sdk-go uses a regional STS endpoint instead of the global one. See the note at the bottom of Signing AWS API requests and AWS STS Regionalized endpoints.
If you're on OSX you can install saml2aws using homebrew!
brew install saml2aws
saml2aws --version
If you're on Windows you can install saml2aws using chocolatey!
choco install saml2aws
saml2aws --version
While brew is available for Linux you can also run the following without using a package manager.
mkdir -p ~/.local/bin
CURRENT_VERSION=$(curl -Ls https://api.github.com/repos/Versent/saml2aws/releases/latest | grep 'tag_name' | cut -d'v' -f2 | cut -d'"' -f1)
wget -c "https://github.com/Versent/saml2aws/releases/download/v${CURRENT_VERSION}/saml2aws_${CURRENT_VERSION}_linux_amd64.tar.gz" -O - | tar -xzv -C ~/.local/bin
chmod u+x ~/.local/bin/saml2aws
hash -r
saml2aws --version
If U2F support is required then there are separate builds for this - use the following download URL instead:
wget -c "https://github.com/Versent/saml2aws/releases/download/v${CURRENT_VERSION}/saml2aws-u2f_${CURRENT_VERSION}_linux_amd64.tar.gz" -O - | tar -xzv -C ~/.local/bin
You will need Go Tools (you can check your package maintainer as well) installed and the Go Lint tool
Clone this repo to your $GOPATH/src
directory
Now you can install by running
make
make install
Arch Linux and its derivatives
The saml2aws
tool is available in AUR (saml2aws-bin), so you can install it using an available AUR helper:
- Manjaro:
$ pamac build saml2aws-bin
If you are on Void Linux you can use xbps to install the saml2aws package!
xbps-install saml2aws
saml2aws
can generate completion scripts.
Add the following line to your .bash_profile
(or equivalent):
eval "$(saml2aws --completion-script-bash)"
Add the following line to your .zshrc
(or equivalent):
eval "$(saml2aws --completion-script-zsh)"
Install the AWS CLI see, in our case we are using homebrew on OSX.
brew install awscli
usage: saml2aws [<flags>] <command> [<args> ...]
A command line tool to help with SAML access to the AWS token service.
Flags:
--help Show context-sensitive help (also try --help-long and --help-man).
--version Show application version.
--quiet silences logs
--verbose Enable verbose logging
-i, --provider=PROVIDER This flag is obsolete. See: https://github.com/Versent/saml2aws#configuring-idp-accounts
-a, --idp-account="default" The name of the configured IDP account. (env: SAML2AWS_IDP_ACCOUNT)
--idp-provider=IDP-PROVIDER
The configured IDP provider. (env: SAML2AWS_IDP_PROVIDER)
--mfa=MFA The name of the mfa. (env: SAML2AWS_MFA)
-s, --skip-verify Skip verification of server certificate. (env: SAML2AWS_SKIP_VERIFY)
--url=URL The URL of the SAML IDP server used to login. (env: SAML2AWS_URL)
--username=USERNAME The username used to login. (env: SAML2AWS_USERNAME)
--password=PASSWORD The password used to login. (env: SAML2AWS_PASSWORD)
--mfa-token=MFA-TOKEN The current MFA token (supported in Keycloak, ADFS, GoogleApps, Okta). (env: SAML2AWS_MFA_TOKEN)
--role=ROLE The ARN of the role to assume. (env: SAML2AWS_ROLE)
--aws-urn=AWS-URN The URN used by SAML when you login. (env: SAML2AWS_AWS_URN)
--skip-prompt Skip prompting for parameters during login.
--session-duration=SESSION-DURATION
The duration of your AWS Session. (env: SAML2AWS_SESSION_DURATION)
--disable-keychain Do not use keychain at all. (env: SAML2AWS_DISABLE_KEYCHAIN)
-r, --region=REGION AWS region to use for API requests, e.g. us-east-1, us-gov-west-1, cn-north-1 (env: SAML2AWS_REGION)
Commands:
help [<command>...]
Show help.
configure [<flags>]
Configure a new IDP account.
--app-id=APP-ID OneLogin app id required for SAML assertion. (env: ONELOGIN_APP_ID)
--client-id=CLIENT-ID OneLogin client id, used to generate API access token. (env: ONELOGIN_CLIENT_ID)
--client-secret=CLIENT-SECRET
OneLogin client secret, used to generate API access token. (env: ONELOGIN_CLIENT_SECRET)
--subdomain=SUBDOMAIN OneLogin subdomain of your company account. (env: ONELOGIN_SUBDOMAIN)
--mfa-ip-address=MFA-IP-ADDRESS
IP address whitelisting defined in OneLogin MFA policies. (env: ONELOGIN_MFA_IP_ADDRESS)
-p, --profile=PROFILE The AWS profile to save the temporary credentials. (env: SAML2AWS_PROFILE)
--resource-id=RESOURCE-ID F5APM SAML resource ID of your company account. (env: SAML2AWS_F5APM_RESOURCE_ID)
--config=CONFIG Path/filename of saml2aws config file (env: SAML2AWS_CONFIGFILE)
--cache-saml Caches the SAML response (env: SAML2AWS_CACHE_SAML)
--cache-file=CACHE-FILE The location of the SAML cache file (env: SAML2AWS_SAML_CACHE_FILE)
--disable-sessions Do not use Okta sessions. Uses Okta sessions by default. (env: SAML2AWS_OKTA_DISABLE_SESSIONS)
--disable-remember-device Do not remember Okta MFA device. Remembers MFA device by default. (env: SAML2AWS_OKTA_DISABLE_REMEMBER_DEVICE)
login [<flags>]
Login to a SAML 2.0 IDP and convert the SAML assertion to an STS token.
-p, --profile=PROFILE The AWS profile to save the temporary credentials. (env: SAML2AWS_PROFILE)
--duo-mfa-option=DUO-MFA-OPTION
The MFA option you want to use to authenticate with
--client-id=CLIENT-ID OneLogin client id, used to generate API access token. (env: ONELOGIN_CLIENT_ID)
--client-secret=CLIENT-SECRET
OneLogin client secret, used to generate API access token. (env: ONELOGIN_CLIENT_SECRET)
--mfa-ip-address=MFA-IP-ADDRESS
IP address whitelisting defined in OneLogin MFA policies. (env: ONELOGIN_MFA_IP_ADDRESS)
--force Refresh credentials even if not expired.
--credential-process Enables AWS Credential Process support by outputting credentials to STDOUT in a JSON message.
--credentials-file=CREDENTIALS-FILE
The file that will cache the credentials retrieved from AWS. When not specified, will use the default AWS credentials file location. (env: SAML2AWS_CREDENTIALS_FILE)
--cache-saml Caches the SAML response (env: SAML2AWS_CACHE_SAML)
--cache-file=CACHE-FILE The location of the SAML cache file (env: SAML2AWS_SAML_CACHE_FILE)
--download-browser-driver Automatically download browsers for Browser IDP. (env: SAML2AWS_AUTO_BROWSER_DOWNLOAD)
--disable-sessions Do not use Okta sessions. Uses Okta sessions by default. (env: SAML2AWS_OKTA_DISABLE_SESSIONS)
--disable-remember-device Do not remember Okta MFA device. Remembers MFA device by default. (env: SAML2AWS_OKTA_DISABLE_REMEMBER_DEVICE)
exec [<flags>] [<command>...]
Exec the supplied command with env vars from STS token.
-p, --profile=PROFILE The AWS profile to save the temporary credentials. (env: SAML2AWS_PROFILE)
--exec-profile=EXEC-PROFILE
The AWS profile to utilize for command execution. Useful to allow the aws cli to perform secondary role assumption. (env: SAML2AWS_EXEC_PROFILE)
--credentials-file=CREDENTIALS-FILE
The file that will cache the credentials retrieved from AWS. When not specified, will use the default AWS credentials file location. (env: SAML2AWS_CREDENTIALS_FILE)
console [<flags>]
Console will open the aws console after logging in.
--exec-profile=EXEC-PROFILE
The AWS profile to utilize for console execution. (env: SAML2AWS_EXEC_PROFILE)
-p, --profile=PROFILE The AWS profile to save the temporary credentials. (env: SAML2AWS_PROFILE)
--force Refresh credentials even if not expired.
--link Present link to AWS console instead of opening browser
--credentials-file=CREDENTIALS-FILE
The file that will cache the credentials retrieved from AWS. When not specified, will use the default AWS credentials file location. (env: SAML2AWS_CREDENTIALS_FILE)
list-roles
List available role ARNs.
--cache-saml Caches the SAML response (env: SAML2AWS_CACHE_SAML)
--cache-file=CACHE-FILE The location of the SAML cache file (env: SAML2AWS_SAML_CACHE_FILE)
script [<flags>]
Emit a script that will export environment variables.
-p, --profile=PROFILE The AWS profile to save the temporary credentials. (env: SAML2AWS_PROFILE)
--shell=bash Type of shell environment. Options include: bash, /bin/sh, powershell, fish, env
--credentials-file=CREDENTIALS-FILE
The file that will cache the credentials retrieved from AWS. When not specified, will use the default AWS credentials file location. (env: SAML2AWS_CREDENTIALS_FILE)
If the script
sub-command is called, saml2aws
will output the following temporary security credentials:
export AWS_ACCESS_KEY_ID="ASIAI....UOCA"
export AWS_SECRET_ACCESS_KEY="DuH...G1d"
export AWS_SESSION_TOKEN="AQ...1BQ=="
export AWS_SECURITY_TOKEN="AQ...1BQ=="
export AWS_CREDENTIAL_EXPIRATION="2016-09-04T38:27:00Z00:00"
SAML2AWS_PROFILE=saml
Powershell, sh and fish shells are supported as well.
Env is useful for all AWS SDK compatible tools that can source an env file. It is a powerful combo with docker and the --env-file
parameter.
If you use eval $(saml2aws script)
frequently, you may want to create a alias for it:
zsh:
alias s2a="function(){eval $( $(command saml2aws) script --shell=bash --profile=$@);}"
bash:
function s2a { eval $( $(which saml2aws) script --shell=bash --profile=$@); }
env:
docker run -ti --env-file <(saml2aws script --shell=env) amazon/aws-cli s3 ls
If the exec
sub-command is called, saml2aws
will execute the command given as an argument:
By default saml2aws will execute the command with temp credentials generated via saml2aws login
.
The --exec-profile
flag allows for a command to execute using an aws profile which may have chained
"assume role" actions. (via 'source_profile' in ~/.aws/config)
options:
--exec-profile Execute the given command utilizing a specific profile from your ~/.aws/config file
This is the new way of adding IDP provider accounts, it enables you to have named accounts with whatever settings you like and supports having one default account which is used if you omit the account flag. This replaces the --provider flag and old configuration file in 1.x.
To add a default IdP account to saml2aws just run the following command and follow the prompts.
$ saml2aws configure
? Please choose a provider: Ping
? AWS Profile myaccount
? URL https://example.com
? Username [email protected]
? Password
No password supplied
account {
URL: https://example.com
Username: [email protected]
Provider: Ping
MFA: Auto
SkipVerify: false
AmazonWebservicesURN: urn:amazon:webservices
SessionDuration: 3600
Profile: myaccount
Region: us-east-1
}
Configuration saved for IDP account: default
Then to login using this account.
saml2aws login
You can also add named accounts, below is an example where I am setting up an account under the wolfeidau
alias, again just follow the prompts.
saml2aws configure -a wolfeidau
You can also configure the account alias without prompts.
saml2aws configure -a wolfeidau --idp-provider KeyCloak --username [email protected] -r cn-north-1 \
--url https://keycloak.wolfe.id.au/auth/realms/master/protocol/saml/clients/amazon-aws --skip-prompt
Then your ready to use saml2aws.
Log into a service (without MFA).
$ saml2aws login
Using IDP Account default to access Ping https://id.example.com
To use saved password just hit enter.
Username [[email protected]]:
Password: ************
Authenticating as [email protected] ...
Selected role: arn:aws:iam::123123123123:role/AWS-Admin-CloudOPSNonProd
Requesting AWS credentials using SAML assertion
Saving credentials
Logged in as: arn:aws:sts::123123123123:assumed-role/AWS-Admin-CloudOPSNonProd/[email protected]
Your new access key pair has been stored in the AWS configuration
Note that it will expire at 2016-09-19 15:59:49 +1000 AEST
To use this credential, call the AWS CLI with the --profile option (e.g. aws --profile saml ec2 describe-instances).
Log into a service (with MFA).
$ saml2aws login
Using IDP Account default to access Ping https://id.example.com
To use saved password just hit enter.
Username [[email protected]]:
Password: ************
Authenticating as [email protected] ...
Enter passcode: 123456
Selected role: arn:aws:iam::123123123123:role/AWS-Admin-CloudOPSNonProd
Requesting AWS credentials using SAML assertion
Saving credentials
Logged in as: arn:aws:sts::123123123123:assumed-role/AWS-Admin-CloudOPSNonProd/[email protected]
Your new access key pair has been stored in the AWS configuration
Note that it will expire at 2016-09-19 15:59:49 +1000 AEST
To use this credential, call the AWS CLI with the --profile option (e.g. aws --profile saml ec2 describe-instances --region us-east-1).
If you are using WSL1 or WSL2, you might get the following error when attempting to save the credentials into the keychain
No such interface “org.freedesktop.DBus.Properties” on object at path /
This happens because the preferred keyring back-end - uses the gnome-keyring
by default - which requires X11 - and if you are not using Windows 11 with support for Linux GUI applications - this can be difficult without configuring a X11 forward.
There are 2 preferred approaches to workaround this issue:
You can apply the --disable-keychain
flag when using both the configure
and login
commands. Using this flag means that your credentials (such as your password to your IDP, or in the case of Okta the Okta Session Token) will not save to your keychain - and be skipped entierly. This means you will be required to enter your username and password each time you invoke the login
command.
There are a few steps involved with this option - however this option will save your credentials (such as your password to your IDP, and session tokens etc) into the pass
[https://www.passwordstore.org/] keyring. The pass
keyring is the standard Unix password manager. This option was heavily inspired by a similar issue in aws-vault
To configure pass to be the default keyring the following steps will need to be completed (assuming you are using Ubuntu 20.04 LTS):
- Install the pass backend and update gnupg, which encrypts passwords
sudo apt-get update && sudo apt-get install -y pass gnupg
- Generate a key with gpg (gnupg) and take note of your public key
gpg --gen-key
The output of the gpg command will output the something similar to the following:
public and secret key created and signed.
pub rsa3072 2021-04-22 [SC] [expires: 2023-04-22]
844E426A53A64C2A916CBD1F522014D5FDBF6E3D
uid Meir Gabay <[email protected]>
sub rsa3072 2021-04-22 [E] [expires: 2023-04-22]
- Create a storage key in pass from the previously generated public (pub) key
pass init <GPG_PUBLIC_KEY>
during the init
process you'll be requested to enter the passphrase provided in step 2
- Now, configure
saml2aws
to use thepass
keyring. This can be done by setting theSAML2AWS_KEYRING_BACKEND
environment variable to bepass
. You'll need to also set theGPG_TTY
to your current tty which means you can set the variable to"$( tty )"
which means the following can be added into your profile
export SAML2AWS_KEYRING_BACKEND=pass
export GPG_TTY="$( tty )"
- Profit! Now when you run login/configure commands - you'll be promoted once to enter your passphrase - and your credentials will be saved into your keyring!
Configuring multiple accounts with custom role and profile in ~/.aws/config
with goal being isolation between infra code when deploying to these environments. This setup assumes you're using separate roles and probably AWS accounts for dev
and test
and is designed to help operations staff avoid accidentally deploying to the wrong AWS account in complex environments. Note that this method configures SAML authentication to each AWS account directly (in this case different AWS accounts). In the example below, separate authentication values are configured for AWS accounts 'profile=customer-dev/awsAccount=was 121234567890' and 'profile=customer-test/awsAccount=121234567891'
To setup the dev account run the following and enter URL, username and password, and assign a standard role to be automatically selected on login.
saml2aws configure -a customer-dev --role=arn:aws:iam::121234567890:role/customer-admin-role -p customer-dev
This will result in the following configuration in ~/.saml2aws
.
[customer-dev]
url = https://id.customer.cloud
username = [email protected]
provider = Ping
mfa = Auto
skip_verify = false
timeout = 0
aws_urn = urn:amazon:webservices
aws_session_duration = 28800
aws_profile = customer-dev
role_arn = arn:aws:iam::121234567890:role/customer-admin-role
region = us-east-1
To use this you will need to export AWS_DEFAULT_PROFILE=customer-dev
environment variable to target dev
.
To setup the test account run the following and enter URL, username and password.
saml2aws configure -a customer-test --role=arn:aws:iam::121234567891:role/customer-admin-role -p customer-test
This results in the following configuration in ~/.saml2aws
.
[customer-test]
url = https://id.customer.cloud
username = [email protected]
provider = Ping
mfa = Auto
skip_verify = false
timeout = 0
aws_urn = urn:amazon:webservices
aws_session_duration = 28800
aws_profile = customer-test
role_arn = arn:aws:iam::121234567891:role/customer-admin-role
region = us-east-1
To use this you will need to export AWS_DEFAULT_PROFILE=customer-test
environment variable to target test
.
If you are using the Browser Identity Provider, on first invocation of saml2aws login
you need to remember to install
the browser drivers in order for playwright-go to work. Otherwise you will see the following error message:
Error authenticating to IDP.: could not start driver: fork/exec ... no such file or directory
To install the drivers, you can:
- Pass
--download-browser-driver
tosaml2aws login
- Set in your shell environment
SAML2AWS_AUTO_BROWSER_DOWNLOAD=true
- Set
download_browser_driver = true
in your saml2aws config file, i.e.~/.saml2aws
Advanced Configuration (Multiple AWS account access but SAML authenticate against a single 'SSO' AWS account)
Example: (Authenticate to my 'SSO' AWS account. With this setup, there is no need to authenticate again. We can now rely on IAM to assume role cross account)
~/.aws/credentials: #(these are generated by saml2aws login
. Sets up SAML authentication into my AWS 'SSO' account)
[saml]
aws_access_key_id = AAAAAAAAAAAAAAAAB
aws_secret_access_key = duqhdZPRjEdZPRjE=dZPRjEhKjfB
aws_session_token = #REMOVED#
aws_security_token = #REMOVED#
x_principal_arn = arn:aws:sts::000000000123:assumed-role/myInitialAccount
x_security_token_expires = 2019-08-19T15:00:56-06:00
(Use AWS profiles to assume an aws role cross-account) (Note that the "source_profile" is set to SAML which is my SSO AWS account since it is already authenticated)
~/.aws/config:
[profile roleIn2ndAwsAccount]
source_profile=saml
role_arn=arn:aws:iam::123456789012:role/OtherRoleInAnyFederatedAccount # Note the different account number here
role_session_name=myAccountName
[profile extraRroleIn2ndAwsAccount]
# this profile uses a _third_ level of role assumption
source_profile=roleIn2ndAwsAccount
role_arn=arn:aws:iam::123456789012:role/OtherRoleInAnyFederatedAccount
Running saml2aws without --exec-profile flag:
saml2aws exec aws sts get-caller-identity
{
"UserId": "AROAYAROAYAROAYOO:myInitialAccount",
"Account": "000000000123",
"Arn": "arn:aws:sts::000000000123:assumed-role/myInitialAccount" # This shows my 'SSO' account (SAML profile)
}
Running saml2aws with --exec-profile flag:
When using '--exec-profile' I can assume-role into a different AWS account without re-authenticating. Note that it does not re-authenticate since we are already authenticated via the SSO account.
saml2aws exec --exec-profile roleIn2ndAwsAccount aws sts get-caller-identity
{
"UserId": "YOOYOOYOOYOOYOOA:/myAccountName",
"Account": "123456789012",
"Arn": "arn:aws:sts::123456789012:assumed-role/myAccountName"
}
As an example
saml2aws login
aws s3 ls --profile saml
An error occurred (AccessDenied) when calling the ListBuckets operation: Access Denied
# This is denied in this example because there are no S3 buckets in the 'SSO' AWS account
saml2aws exec --exec-profile roleIn2ndAwsAccount aws s3 ls # Runs given CMD with environment configured from --exec-profile role
# If we check env variables we see that our environment is configured with temporary credentials for our 'assumed role'
env | grep AWS
AWS_SESSION_TTL=12h
AWS_FEDERATION_TOKEN_TTL=12h
AWS_ASSUME_ROLE_TTL=1h
AWS_ACCESS_KEY_ID=AAAAAAAASORTENED
AWS_SECRET_ACCESS_KEY=secretShortened+6jJ5SMqsM5CkYi3Gw7
AWS_SESSION_TOKEN=ShortenedTokenXXX=
AWS_SECURITY_TOKEN=ShortenedSecurityTokenXXX=
AWS_CREDENTIAL_EXPIRATION=2016-09-04T38:27:00Z00:00
# If we desire to execute multiple commands utilizing our assumed profile, we can obtain a new shell with Env variables configured for access
saml2aws exec --exec-profile roleIn2ndAwsAccount $SHELL # Get a new shell with AWS env vars configured for 'assumed role' account access
# We are now able to execute AWS cli commands with our assume role permissions
# Note that we do not need a --profile flag because our environment variables were set up for this access when we obtained a new shell with the --exec-profile flag
aws s3 ls
2019-07-30 01:32:59 264998d7606497040-sampleBucket
aws iam list-groups
{
"Groups": [
{
"Path": "/",
"GroupName": "MyGroup",
"GroupId": "AGAGTENTENTENGOCQFK",
"Arn": "arn:aws:iam::123456789012:group/MyGroup",
"CreateDate": "2019-05-13T16:12:19Z"
]
}
}
There are few additional parameters allowing to customise saml2aws configuration.
Use following parameters in ~/.saml2aws
file:
http_attempts_count
- configures the number of attempts to send http requests in order to authorise with saml provider. Defaults to 1http_retry_delay
- configures the duration (in seconds) of timeout between attempts to send http requests to saml provider. Defaults to 1region
- configures which region endpoints to use, See Audience and partitiontarget_url
- look for a target endpoint other than signin.aws.amazon.com/saml. The Okta, Pingfed, Pingone and Shibboleth ECP providers need to either explicitly send or look for this URL in a response in order to obtain or identify an appropriate authentication response. This can be overridden here if you wish to authenticate for something other than AWS.
Example: typical configuration with such parameters would look like follows:
[default]
url = https://id.customer.cloud
username = [email protected]
provider = Ping
mfa = Auto
skip_verify = false
timeout = 0
aws_urn = urn:amazon:webservices
aws_session_duration = 28800
aws_profile = customer-dev
role_arn = arn:aws:iam::121234567890:role/customer-admin-role
http_attempts_count = 3
http_retry_delay = 1
region = us-east-1
To build this software on osx clone to the repo to $GOPATH/src/github.com/versent/saml2aws
and ensure you have $GOPATH/bin
in your $PATH
.
make mod
Install the binary to $GOPATH/bin
.
make install
Then to test the software just run.
make test
Before raising a PR please run the linter.
make lint-fix
To build this software on Debian/Ubuntu, you need to install a build dependency:
sudo apt install libudev-dev
You also need GoReleaser installed, and the binary (or a symlink) in bin/goreleaser
.
ln -s $(command -v goreleaser) bin/goreleaser
Then you can build:
make build
The exec sub command will export the following environment variables.
- AWS_ACCESS_KEY_ID
- AWS_SECRET_ACCESS_KEY
- AWS_SESSION_TOKEN
- AWS_SECURITY_TOKEN
- EC2_SECURITY_TOKEN
- AWS_PROFILE
- AWS_DEFAULT_PROFILE
- AWS_CREDENTIAL_EXPIRATION
Note: That profile environment variables enable you to use exec
with a script or command which requires an explicit profile.
This tool would not be possible without some great opensource libraries.
- goquery html querying
- etree xpath selector
- kingpin command line flags
- aws-sdk-go AWS Go SDK
- go-ini INI file parser
- go-ntlmssp NTLM/Negotiate authentication
Install github-release
.
go get github.com/buildkite/github-release
To release run.
make release
There are two levels of debugging, first emits debug information and the URL / Method / Status line of requests.
saml2aws login --verbose
The second emits the content of requests and responses, this includes authentication related information so don't copy and paste it into chat or tickets!
DUMP_CONTENT=true saml2aws login --verbose
Credential Process is a convenient way of interfacing credential providers with the AWS Cli.
You can use saml2aws
as a credential provider by simply configuring it and then adding a profile to the AWS configuration. saml2aws
has a flag --credential-process
generating an output with the right JSON format, as well as a flag --quiet
that will block the logging from being displayed.
The AWS credential file (typically ~/.aws/credentials) has precedence over the credential_process provider. That means that if credentials are present in the file, the credential process will not trigger. To counter that you can override the aws credential location of saml2aws
to another file using --credential-file
or specifying it during configure
.
An example of the aws configuration (~/.aws/config
):
[profile mybucket]
region = us-west-1
credential_process = saml2aws login --skip-prompt --quiet --credential-process --role <ROLE> --profile mybucket
When using the aws cli with the mybucket
profile, the authentication process will be run and the aws will then be executed based on the returned credentials.
You can use the flag --cache-saml
in order to cache the SAML assertion at authentication time. The SAML assertion cache has a very short validity (5 min) and can be used to authenticate to several roles with a single MFA validation.
there is a file per saml2aws profile, the cache directory is called saml2aws
and is located in your .aws
directory in your user homedir.
You can toggle --cache-saml
during login
or during list-roles
, and you can set it once during configure
and use it implicitly.
This requires the use of the keychain (local credentials store). If you disabled the keychain using --disable-keychain
, Okta sessions will also be disabled.
Okta sessions are enabled by default. This will store the Okta session locally and save your device for MFA. This means that if the session has not yet expired, you will not be prompted for MFA.
- To disable remembering the device, you can toggle
--disable-remember-device
duringlogin
orconfigure
commands. - To disable using Okta sessions, you can toggle
--disable-sessions
duringlogin
orconfigure
commands.- This will also disable the Okta MFA remember device feature
Use the --force
flag during login
command to prompt for AWS role selection.
If Okta sessions are disabled via any of the methods mentioned above, the login process will default to the standard authentication process (without using sessions).
Please note that your Okta session duration and MFA policies are governed by your Okta host organization.
This code is Copyright (c) 2018 Versent and released under the MIT license. All rights not explicitly granted in the MIT license are reserved. See the included LICENSE.md file for more details.