qrome / pi-hole-monitor Goto Github PK

Hello
I have a strange problem, tried with many version of esp2866 core (from 2.41 to 2.74).
All is good, the setup is ok, the display run fine till last message "web interface" then I don't get any graphic by pi-hole section (see image), remains stuck on this.
I'm using an SSH1106 and pins D3&D4 (the same wemos+ssh1106 I used for your weather station)

Below the log that seem everything is good:

`UtcOffset=-1.00
PiHoleServer=192.168.0.7
PiHolePort=80
PiHoleApiKey=fbe8631820d75f44c4ca1520fdb69a638f80739367f3484f1c0f1900bcd9d4b0
SHOW_CLIENTS=1
minutesBetweenDataRefresh=15
themeColor=light-blue
IS_BASIC_AUTH=1
www_username=admin
www_password=***
IS_24HOUR=1
INVERT_DISPLAY=1
USE_FLASH=1
Sending: http://192.168.0.7:80/admin/api.php?summary
Failed to connect and get data: http://192.168.0.7:80/admin/api.php?summary
Sending: http://192.168.0.7:80/admin/api.php?overTimeData10mins
Failed to get data: http://192.168.0.7:80/admin/api.php?overTimeData10mins
Sending: http://192.168.0.7:80/admin/api.php?topClientsBlocked=3&auth=fbe8631820d75f44c4ca1520fdb69a638f80739367f3484f1c0f1900bcd9d4b0
Failed to get data: http://192.168.0.7:80/admin/api.php?topClientsBlocked=3&auth=fbe8631820d75f44c4ca1520fdb69a638f80739367f3484f1c0f1900bcd9d4b0
*WM: [1] AutoConnect
*WM: [2] Connecting as wifi client...
*WM: [3] STA static IP:
*WM: [2] setSTAConfig static ip not set, skipping
*WM: [1] Connecting to SAVED AP: MAXNETHOME
*WM: [3] Using Password: ********
*WM: [3] WiFi station enable
*WM: [3] enableSTA PERSISTENT ON
*WM: [1] connectTimeout not set, ESP waitForConnectResult...
*WM: [2] Connection result: WL_CONNECTED
*WM: [3] lastconxresult: WL_CONNECTED
*WM: [1] AutoConnect: SUCCESS
*WM: [1] STA IP Address: 192.168.0.108
Signal Strength (RSSI): 56%
Server started
Use this URL : http://192.168.0.108:80/
*** Leaving setup()
*WM: [3] unloading

Updating Time...
.
09:18:35
9:18:35
33515
Local time: 8:18 AM
Sending: http://192.168.0.7:80/admin/api.php?summary
Response Code: 200
Response: {"domains_being_blocked":"84,352","dns_queries_today":"81,833","ads_blocked_today":"7,085","ads_percentage_today":"8.7","unique_domains":"4,191","queries_forwarded":"31,564","queries_cached":"43,184","clients_ever_seen":"61","unique_clients":"55","dns_queries_all_types":"81,833","reply_NODATA":"7,250","reply_NXDOMAIN":"806","reply_CNAME":"11,550","reply_IP":"52,129","privacy_level":"0","status":"enabled","gravity_last_updated":{"file_exists":true,"absolute":1601169554,"relative":{"days":1,"hours":7,"minutes":59}}}
Pi-Hole Status: enabled
Todays Percentage Blocked: 8.7

Sending: http://192.168.0.7:80/admin/api.php?overTimeData10mins
Response Code: 200
Modified Response: {"ads_over_time":{"1601201100":20,"1601201700":27,"1601202300":73,"1601202900":41,"1601203500":15,"1601204100":55,"1601204700":82,"1601205300":38,"1601205900":74,"1601206500":37,"1601207100":20,"1601207700":58,"1601208300":30,"1601208900":48,"1601209500":77,"1601210100":54,"1601210700":62,"1601211300":71,"1601211900":41,"1601212500":15,"1601213100":52,"1601213700":34,"1601214300":38,"1601214900":38,"1601215500":16,"1601216100":64,"1601216700":74,"1601217300":52,"1601217900":16,"1601218500":38,"1601219100":39,"1601219700":32,"1601220300":65,"1601220900":35,"1601221500":20,"1601222100":35,"1601222700":29,"1601223300":38,"1601223900":63,"1601224500":33,"1601225100":91,"1601225700":137,"1601226300":58,"1601226900":20,"1601227500":47,"1601228100":36,"1601228700":30,"1601229300":49,"1601229900":53,"1601230500":68,"1601231100":72,"1601231700":49,"1601232300":53,"1601232900":145,"1601233500":53,"1601234100":25,"1601234700":58,"1601235300":42,"1601235900":22,"1601236500":66,"1601237100":48,"1601237700":43,"1601238300":53,"1601238900":49,"1601239500":46,"1601240100":159,"1601240700":89,"1601241300":93,"1601241900":62,"1601242500":50,"1601243100":66,"1601243700":147,"1601244300":66,"1601244900":50,"1601245500":79,"1601246100":100,"1601246700":78,"1601247300":54,"1601247900":27,"1601248500":24,"1601249100":65,"1601249700":23,"1601250300":21,"1601250900":42,"1601251500":24,"1601252100":17,"1601252700":47,"1601253300":36,"1601253900":50,"1601254500":44,"1601255100":27,"1601255700":16,"1601256300":47,"1601256900":35,"1601257500":35,"1601258100":47,"1601258700":20,"1601259300":16,"1601259900":45,"1601260500":37,"1601261100":47,"1601261700":44,"1601262300":23,"1601262900":17,"1601263500":50,"1601264100":34,"1601264700":37,"1601265300":33,"1601265900":32,"1601266500":18,"1601267100":46,"1601267700":32,"1601268300":50,"1601268900":48,"1601269500":55,"1601270100":22,"1601270700":80,"1601271300":29,"1601271900":32,"1601272500":48,"1601273100":56,"1601273700":87,"1601274300":65,"1601274900":46,"1601275500":115,"1601276100":81,"1601276700":62,"1601277300":52,"1601277900":116,"1601278500":107,"1601279100":54,"1601279700":60,"1601280300":46,"1601280900":53,"1601281500":69,"1601282100":72,"1601282700":33,"1601283300":53,"1601283900":46,"1601284500":35}}
High Value: 159
Count: 140

Sending: http://192.168.0.7:80/admin/api.php?topClientsBlocked=3&auth=fbe8631820d75f44c4ca1520fdb69a638f80739367f3484f1c0f1900bcd9d4b0
Response Code: 200
Response: {"top_sources_blocked":{"192.168.0.80":2873,"192.168.0.66":1784,"192.168.0.10":814}}
Blocked Client 1: 192.168.0.80 (2873)
Blocked Client 2: 192.168.0.66 (1784)
Blocked Client 3: 192.168.0.10 (814)

`

I have modified the Settings.h to set my user & password in order to access the Configuration sections, but any value used here will not work, I commented the validation in piholemonitor in order to skip validation and I have observed that the user & password are populated automatically with
User: password
Password: password
So it's not really updating the values, then i tried to access using the above credentials and it works, but if I change the credentials on the Configuration page to others it wont update anything using the specified ones.

I have also tried to dissable the acces setting it to false, and it still asks for user/password.
boolean IS_BASIC_AUTH = false; // true = require athentication to change configuration settings / false = no auth

Receiving the following error when tryin to compile:

Compilation error: call to 'HTTPClient::begin' declared with attribute error: obsolete API, use ::begin(WiFiClient, url)

Can you assist?

I've done everything as in description. I have 0,96 and 1,3 OLED, tried them. None of them gives me nothign.

What am I missing?

Displays are black, and on sign of anything on them.

Thanks

Set this up today pointed it to my docker server running pi hole..

It gets the date and ips that tried blocked domains, but nothing else, ive looked in serial monitor and get this

Sending: http://192.168.1.164:1010/admin/api.php?summary
Response Code: 200
Response: []
Data Summary Parsing failed: http://192.168.1.164:1010/admin/api.php?summary
Sending: http://192.168.1.164:1010/admin/api.php?overTimeData10mins
Response Code: 200
Modified Response: {
Data Parsing failed: http://192.168.1.164:1010/admin/api.php?overTimeData10mins
Sending: http://192.168.1.164:1010/admin/api.php?topClientsBlocked=3&auth=3ed0140524f0e5571e0134b6153656db4efa37be7b09a11adfa61f7c5dfda72e
Response Code: 200
Response: {"top_sources_blocked":{"192.168.1.191":3}}
Blocked Client 1: 192.168.1.191 (3)

When i click in the pi hole monitor config test connection for summary i get the summary returned fine etc....

{"domains_being_blocked":"166,512","dns_queries_today":"533","ads_blocked_today":"4","ads_percentage_today":"0.8","unique_domains":"268","queries_forwarded":"515","queries_cached":"8","clients_ever_seen":"3","unique_clients":"3","dns_queries_all_types":"533","reply_UNKNOWN":"40","reply_NODATA":"109","reply_NXDOMAIN":"43","reply_CNAME":"220","reply_IP":"63","reply_DOMAIN":"0","reply_RRNAME":"0","reply_SERVFAIL":"0","reply_REFUSED":"0","reply_NOTIMP":"0","reply_OTHER":"0","reply_DNSSEC":"58","reply_NONE":"0","reply_BLOB":"0","dns_queries_all_replies":"533","privacy_level":"0","status":"enabled","gravity_last_updated":{"file_exists":true,"absolute":1673452010,"relative":{"days":0,"hours":0,"minutes":39}}}

but the pihole monitor not grabbing this info properly?

When changing the password from web interface it always sets the same value to both password/username, so if I set username "Admin" and Password "12345" it saves settings with Username "12345" Password "12345"

Hi friends. First of all I am a newb and this is my first attempt at a project like this. I am pleased that I got this far. :) I have the board connected to my wifi and I am logged into it. I ran the tests and it is seeing the pihole data however nothing shows on the OLED display. I have double checked the connections and my solder looks good. The OLED has not showed any signs of life. Could it be bad? Wasn't sure if there is something could be causing this. Just looking for any suggestions. I was so close to making this work :)

Hi there,

i dont know if this is the right was to ask.

could you implement the funktion to deactivate pihole for a time that is config per webinterface.
i would love to trigger this event by a hardware button.

thanks for your work

Today i updated to v1.5 via the Web Interface. After unplugging and replugging the device, it no longer shows any Display Output.
The WebInterface still works just fine.
I Tried re-Flashing the Firmware via the WebInterface, but no Change.
the Display stays off no matter what i do. Not even the Boot-Up Sequence is shown with the IP.
Only the Webinterface keeps working.

I use this Hardware https://www.etsy.com/de-en/listing/823257424/octoprint-3d-printer-monitor-kit-with?variation0=1461984079

So my pi-hole SD took a crap, had to reinstall. Now im trying to get my pi-hole monitor setup again, and if keeps telling me wronv password. I don't believe i changed it cause i have nothing in my password vault.
So how can i default it to start over?

Thanks.

Is it possible to add a true/false to the webgui for displaying the top 3 of blocked clients?

The text is very small and it almost unreadable.

I flashed it with Platformio with ArduinoJson in libs folder from the Repo. After a few runs it is getting more and more data. Sometimes the summary works and the others doesn't.

Sending: http://10.1.4.3:80/admin/api.php?summary Failed to connect and get data: http://10.1.4.3:80/admin/api.php?summary Sending: http://10.1.4.3:80/admin/api.php?overTimeData10mins Failed to get data: http://10.1.4.3:80/admin/api.php?overTimeData10mins Sending: http://10.1.4.3:80/admin/api.php?topClientsBlocked=3&auth=4ba89e70bb8243ef7ce9fbd9dfec1ddd11d5c62464f322419f4f094f29d120c9 Failed to get data: http://10.1.4.3:80/admin/api.php?topClientsBlocked=3&auth=4ba89e70bb8243ef7ce9fbd9dfec1ddd11d5c62464f322419f4f094f29d120c9 Sending: http://10.1.4.3:80/admin/api.php?summary Response Code: 200 Response: {"domains_being_blocked":"111,810","dns_queries_today":"199,878","ads_blocked_today":"10,948","ads_percentage_today":"5.5","unique_domains":"863","queries_forwarded":"26,955","queries_cached":"161,974","clients_ever_seen":"17","unique_clients":"17","dns_queries_all_types":"199,878","reply_NODATA":"66","reply_NXDOMAIN":"31","reply_CNAME":"2,715","reply_IP":"1,333","privacy_level":"0","status":"enabled","gravity_last_updated":{"file_exists":true,"absolute":1556416208,"relative":{"days":"3","hours":"10","minutes":"13"}}} Pi-Hole Status: enabled Todays Percentage Blocked: 5.5

Hello,

I am running:
Pi-hole v5.14.2
FTL v5.20
Web Interface v5.18

The summary is not appearing if you try http://xx.xx.xx.xx/admin/api.php?summary
If I login to the GUI of pi-hole then it appears.

It looks like they changed this to require login before returning the summary.
Please have a look.

Regards!

Would it be possible to have also the CPU Load and Temp scrolling in the display?
I Saw you did some preparations for it but seems not to be finished right?

Implement TimeDB

When I tried to update my pi-hole monitor using the .bin file via the web interface. I keep getting the following error:

Update error: ERROR[10]: Magic byte is wrong, not 0xE9

I Used the following .bin file since I'm using 0.96 OLED display: piholemonitor.ino.d1_mini_v1.5.bin