##Hardware Info
| Hardware | Description |
|---|---|
| CPU | SAMSUNG S3C6410A, ARM1176JZF-S, run at 533Mhz, up to 667Mhz |
| Board | Tiny6410 (v1308) |
| SDRAM | SAMSUNG K4X2G323PD-8GD8, Mobile DDR 64Mx32(=2048Mb = 256GB ) 200Mhz Halogen Free FBGA90 DRAM |
| FLASH | SAMSUNG K9K8G08U0E-SCB0, the same datasheet), 8G bit(= 1GB ) Nand Flash 1Gx8 SLC |
| LEDs | LED1 |
| Button | Reset button, M_nRESET, active-low |
| JTAG | 10 pin 2.0mm space JTAG connector |
| Expander Board | Tiny6410SDK(TinyADK 1312B) with 7"LCD |
| Power | Supply Voltage from 2.0V to 6V |
| Button | K1 |
| Buzzer | XpwmTOUT0 (XpwmTOUT0/XCLKOUT/GPF14) |
| I2C-EEPROM | ATMLH346 (Xi2cSCL0, Xi2cSDA0) |
| USB Device | miniUSB, USB 2.0 |
| USB Host | USB A, USB 2.0 hub(x3) |
##Folder Description
| folder | description |
|---|---|
| arm-asm | ARM-S3C6410 Assembler |
| no-os | ARM-S3C6410 Bare-Metal Program |
| linux | ARM-S3C6410 Linux Program |
| doc | ARM-S3C6410 documents |
###crystal
| crystal | interface | description |
|---|---|---|
| External Clock | XT0,XTI | Y1, 12M |
| X27MXTO | 27MXTO,27MXTI | Y2, 27M |
| USB OTG Clock | OTGTO,OTGTI | Y3, 48M |
| RTC Clock | RTCTO,RTCTI | Y4, 32.768K |
###NAND FLASH - K9K8G08U0E
SAMSUNG K9K8G08U0E-SCB0, 8G bit Nand Flash,1Gx8 SLC K9F4G08U0E , K9K8G08U0E, 同一个芯片手册;
型号说明： http://www.elnec.com/device/Samsung/K9F4G08U0E+%5BTSOP48%5D/
- K = Memory
- 9 = NAND Flash
- F = SLC Normal ; K = SLC Die Normal, SLC Die stack;
- Density: 4G = 4Gbit, 8G = 8Gbit;
- Technology: 0 = Normal (x8)
- Organization: 8 = x8
- Supply Voltage: U = 2.7V to 3.6V
- Mode: 0 = Normal
- Generation: E = 6th generation
###SDRAM - K4X2G323PD-8GD8
http://www.samsung.com/us/business/oem-solutions/pdfs/PSG_2H_2012.pdf
k4x2g323pd-8gd8
k: samsung memort
4: dram
x: mobile ddr sdram
2g: 2g, 8k/64ms
32: x32 (bit organization)
3: 4 of internal banks
p: lvttl, 1.8v, 1.8v
d: 5th generation
-
s/d: 90balls fbga
###FriendlyARM Tiny6410 下载程序 - MiniTools.exe
-
底层板S2选择NAND启动方式
-
按住K1按钮，打开电源开关S1
-
此时若串口连接COM0到PC，配置波特率为115200，就可以看到串口输出消息; 不进行串口连接，也可以在液晶屏上看到同样的消息;
-
输出消息:
Booting from NAND Superboot6410 Ver: 141011 CPU: S3C6410 533MHz RAM: 256MB NAND: 1GB(SLC) ID:ECD35195 Touch Device: 1-wire LCD Type: S70(Auto) USB Mode: Waiting... Hello USB Loop -
底层板通过USB与PC连接，PC识别USB设备。打开MiniTools.exe软件，识别到ARM开发板;
-
同时串口输出消息:
USB Mode: Connected -
选择不同模式，下载程序;
注意: 必须先给板子上电，然后再打开MiniTools.exe, 否则MiniTools.exe会卡死无响应。
###FriendlyARM Tiny6410 下载程序 - SDHC
###交叉编译链 ARM Compilers Toolchains
arm-linux-gcc-4.5.1-v6-vfp-20101103
Download: arm-2014.05-29-arm-none-linux-gnueabi-i686-pc-linux-gnu
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent