Run JmavSim in HITL Mode about jmavsim HOT 10 CLOSED

It's probably QGroundControl autoconnecting first. Kill QGroundControl, start jmavsim, then start QGC (if needed).

from jmavsim.

Is QGroundControl running?

from jmavsim.

Yes its running. I followed the same instructions as mentioned in link in my last comment.

from jmavsim.

Thanks , Now it does not throw that error but its not showing any mavlink messages in terminal. Even its not showing the init mavlink.

from jmavsim.

What do you get?

from jmavsim.

I got this.

I first started the jmavsim then QGC.
Thanks

from jmavsim.

I don't think I quite follow how you've connected with /dev/ttyUSB0 and the telemetry radio.

Can you try with only the usb connection? /dev/ttyACM0

from jmavsim.

Hi , I am trying to do hitl simulation using the snapdragon flight using the command
java -Djava.ext.dirs= -cp lib/*:out/production/jmavsim.jar me.drton.jmavsim.Simulator -serial /dev/ttyUSB0 921600 -qgc
but facing problem , jmavsim is starging but i didnot get any mavlink msg
Do i need to change anything in my command( i am confused about 921600)
Thanks

from jmavsim.

@DrTon I have tuned my quad on JmavSim and works very weel on Simulation. the problem is when i write the PID parameters on Pixhwak to test flight . the quad behaves weirdly please find the link for the video : https://www.dropbox.com/s/chxxrwyg2n9kuug/video-1487278360.mp4?dl=0

from jmavsim.

This seems outdated, closing.

from jmavsim.