Program | Version No. | Date Updated |
---|---|---|
midi2abc | version 2.96 | August 03 2015 |
abc2midi | version 3.70 | August 11 2015 |
abc2abc | version 1.81 | July 02 2015 |
yaps | version 1.62 | May 13 2015 |
abcmatch | version 1.67 | May 13 2015 |
midicopy | version 1.18 | October 01 2013 |
24th January 2002
Copyright James Allwright [email protected] University of Westminster, London, UK
June 2015
Seymour Shlien [email protected]
This is free software. You may copy and re-distribute it under the terms of the GNU General Public License version 2 or later, which is available from the Free Software Foundation (and elsewhere).
This package is to be found on the web at
(The latest versions for the time being is found on ifdo.pugmarks.com/~seymour/runabc/top.html.)
Note, if you have difficulty compiling the package because you do not have snprintf see the note in doc/CHANGES
dated January 08 2005 (and also December 17 2004).
These programs make use of the 'midifilelib
' public domain MIDI file utilities, available from
www.harmony-central.com/MIDI/midifilelib.tar.gz
If you have the source distribution and intend to re-compile the code, read the file coding.txt.
midi2abc
- program to convert MIDI format files to abc notation.
This program takes a MIDI format file and converts it to something as close as possible to abc text format. The user then has to add text fields not present in the MIDI header and possibly tidy up the abc note output.
- The key is chosen so as to minimize the number of accidentals. Alternatively, the user can specify the key numerically (a positive number is the number of sharps, a negative number is minus the number of flats).
- Note length can be set by specifiying the total number of bars or the tempo of the piece. Alternatively the note length can be read from the file. However, by default it is deduced in a heuristic manner from the inter-note distances. This means that you do not have to use the MIDI clock as a metronome when playing in a tune from a keyboard.
- Barlines are automatically inserted. The user specifies the number of measures in the anacrusis before the first barline and the time signature.
- The program can guess how many beats there should be in the anacrusis, either by looking for the first strong note or minimizing the number of notes split by a tie across a barline.
- Where a note extends beyond a bar break, it is split into two tied notes.
- The output has 4 bars per line.
- Enough accidental signs are put in the music to ensure that no pitch errors occur if a barline is added or deleted.
- The program attempts to group notes sensibly in each bar.
- Triplets and broken rhythm (
a>b
) are supported. - Chords are identified.
- Text information from the original MIDI file is included as comments.
- The
-c
option can be used to select only 1 MIDI channel. Events on other channels are ignored.
- Supply tune title, composer or any other field apart from
X:
,K:
,Q:
,M:
andL:
- these must be added by hand afterwards, though they may have been included in the text of the MIDI file. - Support duplets, quadruplets, other esoteric features.
- Support mid-tune key or meter changes.
- Deduce repeats. The output is just the notes in the input file.
- Recover an abc tune as supplied to
abc2midi
. However, if you want to do this, "midi2abc -xa -f file.mid
" comes close.
midi2abc
midi2abc <options>
-a <half L: units>
-xa extract anacrusis from file (find first strong note)
-ga guess anacrusis (minimize ties across bars)
-gk guess key signature by minimizing accidentals
-gu guess the number of midi pulses per note from note
duration statistics in the MIDI file
-m <time signature>
-b <bars wanted in output>
-Q <tempo in quarter-notes per minute>
-k <key signature> -6 to 6 sharps
-c <channel>
[-f] <input file>
-o <output file>
-s do not discard very short notes
-sr do not notate a short rest after a note
-sum summary
-nt do not look for triplets or broken rhythm
-u number of midi pulses per abc time unit
-ppu parts per abc unit length (power of 2 only)
-aul denominator of abc unit length (power of 2 only)
-obpl one bar per line (deprecated)
-bpl <number> of bars per printed line
-bps <number> of bars per staff line
-nogr No note grouping. Space put between every note.
-splitbars splits bars to avoid nonhomophonic chords.
-splitvoices splits voices to avoid nonhomophonic chords.
-midigram No abc file is created, but a list
of all notes is produced. Other parameters
are ignored.
-mftext No abc file is created, but a list of all
the midi commands (mftext like output) is
produced. The output is best viewed with
runabc.tcl
-ver Prints version number and exits
Use only one of -u
-gu
-b
and -Q
or better none. If none of these are present, the program uses the PPQN header information in the MIDI file to determine the note length in MIDI pulses. This usually results in the best output.
The output of midi2abc is printed to the screen. To save it to a file, use the redirection operator or the -o
option, e.g. midi2abc -f file.mid > file.abc
or midi2abc -f file.mid -o file.abc
By default the program uses the key signature and time signature specified in the MIDI file. If the key signature is not specified, the program will automatically determine the key signature by minimizing the number of accidentals. If there is no time signature found, then 4/4 is assumed. You may also specify a time signature using the -m
option. Allowable time signatures are C
, 4/4
, 3/8
, 2/4
and so on.
If the tune has an anacrusis, you should specify the number in quantum units lengths. By default a quantum unit length is one half of the unit length note specified by the L: command. (However, this can be changed using the -ppu runtime parameter.) For example, if the meter is 6/8
and L:
is set to 1/8
, a half unit length is 1/16
note. An anacrusis of a quarter note would be specified as 4.
The -bpl
and -bps
control the formatting of the output. -bpl
controls the number of bars put in every line. The lines are joined together with a backslash (\
) until the desired number of bars per staff are printed. Since -bpl 1
is equivalent to -obpl
, the latter parameter is being deprecated.
Midi2abc has evolved quite a lot since James Allwright has transferred support and development to me [SS]. Most of the MIDI files posted on the web site appear to have been generated from a music notation program and therefore convert cleanly to abc files using all the information built into the file. Therefore midi2abc no longer automatically estimates the number of MIDI pulses per note from the file statistics, but uses the indications embedded in the file. However, the user still has the option of calling these functions or changing this parameter by using the run time parameters Use only one of -u
-gu
-b
and -Q
or better none. The -u
parameter, allows you to specify the number of MIDI pulses per unit length, assuming you know what it should be. To find out the value that midi2abc is using, run the program with the -sum
parameter.
Midi2abc quantizes the note durations to a length of half the L:
value. Thus if L:
was set to 1/8
, then the smallest note that midi2abc would extract would be a 1/16 th note. This is the basic quantum unit. The L:
note length is set by midi2abc on the basis of the time signature. For time signatures less than 3/4
it uses an L: 1/16
and for others it uses a length of 1/8
. This convention was probably choosen so that midi2abc does not quantize the notes to a too fine level producing outputs like C2-C/4 D2-D/8 etc which would be difficult to read. For some music, this may be too coarse and it may be preferable to allow the user take control of the L:
value or allow the splitting of the L:
value into smaller parts. Two new run time parameters were introduced: -ppu
specifies the number of parts to split the L:
note. It should be a power of 2 (eg. 1,2,4,8,16 ...) and by default it remains as 2 as before. The -aul
specifies the L:
value to use, for example, to get L:
1/32 you would put -aul 32
.
Keyboard and guitar music has a lot of chords which frequently poses a problem to midi2abc. If the notes in the chord do not share a common onset or end time, midi2abc uses ties to join the longer notes to other chords. This produces a mess looking somewhat like
[AG-G-G-D-G,,,-][B/2-B/2-B/2-G/2G/2-G/2-D/2-G,,,/2-]...
which does not convert into something easy to read when display in common music notation. Abcm2ps and abc2midi allow a bar to be split into separate voices using the & sign. Separating the notes which do not overlap exactly into individual voices provides some improvement. If you encountering this problem with your MIDI file, you may wish to try rerunning the file with either the -splitbars
or -splitvoices
parameter. This is a feature introduced in June 2005 (version 2.83). The algorithm which separates the notes in a voice into distinct voices (tracks) (label_split
in midi2abc.c
) is rather crude and needs improvement. I welcome any suggestions or improved code.
The -midigram
option runs midi2abc in a completely different mode. It does not produce any abc file but outputs a list of all the notes found in the MIDI file. Each line of output represents one note. For each line, the on and off time in MIDI time units, the track number, the channel number,
midi pitch, and midi velocity are listed. The last line contains a single value equal to the duration of the file in MIDI pulses. The output is designed to eventually go into a graphical user interface (runabc) which will display these events in piano roll format.
Note: midi2abc does not work correctly if the lyrics are embedded in the same track as the notes. If you intend to run midi2abc on the MIDI file produced by abc2midi, you need to use the -STFW
option if the tune contains lyrics.
eg. abc2midi lyric_tune.abc -STFW
Since February 01 2010, abc2midi by default places the lyrics in the same track as the notes. See doc/CHANGES.
abc2midi - converts abc file to MIDI file(s).
Usage : abc2midi <abc file> [reference number] [-c] [-v] [-o filename]
[-t] [-n <value>] [-ver] [-NFNP] [-NFER] [-NGRA] [-STFW] [-NCOM] [-OCC]
[reference number] selects a tune
-c selects checking only
-v <level> selects verbose option
-o <filename> selects output filename
-t selects filenames derived from tune titles
-n <limit> set limit for length of filename stem
-RS use 3:1 instead of 2:1 for broken rhythms
-quiet suppress some common warnings
-silent suppresses other messages
-Q <tempo> in quarter notes/minute
-NFNP ignore all dynamic indications (!f! !ff! !p! etc.)
-NFER ignore fermata markings
-NGRA ignore grace notes
-STFW separate tracks for words (lyrics)
-NCOM suppress comments
-ver prints version number and exits
-BF Barfly mode: invokes a stress model if possible
-OCC old chord convention (eg. +CE+)
-TT tune to A = <frequency>
-CSM <filename> load custom stress models from file
The default action is to write a MIDI file for each abc tune with the filename <stem>N.mid
, where <stem>
is the filestem of the abc file and N is the tune reference number. If the -o
option is used, only one file is written. This is the tune specified by the reference number or, if no reference number is given, the first tune in the file. The -Q
parameter sets the default tempo in event the Q:
command is not given in the abc header. The program accepts both the deprecated (eg. !trill!
) and standard (+trill+
) notation for decorations. Older versions of this program handled the defunct convention for chords (i.e +G2B2D2+
instead of [GBD]2
). If you need to handle the older notation, include the -OCC
flag; however the program will not accept the standard notation for decorations. Broken rhythms indicated by >
or <
(eg. A > B
) assume a the hornpipe ratio of 2:1 rather than 3:1. To change it to 3:1 include the -RS
flag.
-
Broken rythms (>, <), chords, n-tuples, slurring, ties, staccatto notes, repeats, in-tune tempo/length/meter changes are all supported.
-
R:hornpipe or r:hornpipe is recognized and note timings are adjusted to give a broken rhythm (ab is converted to a>b).
-
Most errors in the abc input will generate a suitable error message in the output and the converter keeps going.
-
Comments and text fields in the abc source are converted to text events in the MIDI output
-
If guitar chords are present, they are used to generate an accompaniment in the MIDI output.
-
If there are mis-matched repeat signs in the abc, the program attempts to fix them. However, it will not attempt this if a multi-part tune description has been used or if multiple voices are in use.
-
Karaoke MIDI files can be generated by using the w: field to include lyrics.
-
Nonnumeric voice ids, eg V: soprano, as described as proposed for the new abc standard is handled.
-
Invisible rests specified as x, are treated as normal rests (
z
). -
There are some extensions to the abc syntax of the form
%%MIDI channel n
These control channel and program selection, transposing and various other features of abc2midi. See the file abcguide.txt for more details.
- No field is inherited from above the X: field of the tune.
- Where an accidental is applied to a tied note that extends across a barline, abc2midi requires that the note beyond the barline must be explicitly given an accidental e.g.
^F- | F - will be reported as an error.
^F- | ^F - will produce a tied ^F note.
It is common to see no accidental shown when this occurs in published printed music.
Usage: abc2abc <filename> [-s] [-n X] [-b] [-r] [-e] [-t X]
[-u] [-d] [-v] [-V X] [-ver] [-X n]
-s for new spacing
-n X to re-format the abc with a new linebreak every X bars
-b to remove bar checking
-r to remove repeat checking
-e to remove all error reports
-t X to transpose X semitones
-nda No double accidentals in guitar chords
-nokeys No key signature (i.e. K: none). Use sharps.
-nokeyf No key signature (i.e. K: none). Use flats.
-u to update notation ([] for chords and () for slurs)
-d to notate with doubled note lengths
-v to notate with halved note lengths
-V X[,Y...] to output only voice X,Y...
-P X[,Y...] restricts action to voice X,Y... leaving other voices intact
-ver prints version number and exits
-X n renumber the all X: fields as n, n+1, ..
-usekey sf Use key signature sf (flats/sharps)
-OCC old chord convention (eg. +CE+)
A simple abc checker/re-formatter/transposer. If the -n option is selected, error checking is turned off.
If a voice is assigned to channel 10 (drum channel) using a %%MIDI channel 10
command, then this voice is never transposed.
The -nokeys
or -nokeyf
option will set "K: none
" and place accidentals on all notes that should have accidentals for the expected key signature. The first option will use only sharps; the second option will use only flats.
The -usekey
option will force the key signature to be key[sf]
where sf
is a number between -5 and +5, inclusive.
sf -5 -4 -3 -2 -1 0 1 2 3 4 5
key Db Ab Eb Bb F C G D A E B
Accidentals will be added to preserve the correct notes. This is useful for some music with many accidentals which does not fit in any specific key signature. If sf = 0
, abc2abc use K:none
.
If you want to check an abc tune, it is recommended that you use abc2midi with the -c
option as this performs extra checks that abc2abc does not do.
When using the -P X
option, it may be necessary to insert some field commands such as K:
or L:
following the voice X declaration, so that they will be converted and appear in the output.
The output of abc2abc is printed to the screen. To save it to a file, use the redirection operator, e.g. abc2abc file.abc -t 2 > newfile.abc
- When using the
-n
option on a program with lyrics, a barline in aw:
field may be carried forward to the nextw:
field.
This gives a verbose description of what is in a MIDI file. You may wish to use it to check the output from abc2midi. It is part of the original midifilelib distribution.
YAPS
is an abc to PostScript converter which can be used as an alternative
to abc2ps. See the file yaps.txt for a more detailed description of this
program.
midicopy
is a stand alone application which copies a midi file or part of a midi file to a new midi file. If you run it with no parameters, a short description shown below will appear.
midicopy <options> input.mid output.mid
midicopy copies selected tracks, channels, time interval of the input midi file.options:
-ver version information
-trks n1,n2,..(starting from 1)
-chns n1,n2,..(starting from 1)
-from n (in midi ticks)
-to n (in midi ticks)
-replace trk,loc,val
midicopy.exe -ver
will print out something like 1.00 July 11 2004
midicopy.exe input.mid output.mid
does nothing interesting except copy the contents of input.mid
to a new file output.mid
.
If you include the -from
parameter followed by a midi pulse number, then the program will select the appropriate data starting after the given midi pulse location so that will you play midi file it will start from that midi pulse number. In order to ensure that the right tempo, channel assignments are used, all of these commands prior to that pulse number are also copied.
If you include the -to
command followed by a midi pulse number, the midi file is truncated beyond that point, so that when you play the file it will stop at this point.
If you have selected a time interval using the -from
or -to
parameters (or both), then the program will print out the estimated duration of the output midi file.
All the tracks will be copied unless you specify them in the list following keyword -trks
. You start counting tracks from 1.
Similarly, all channels will be copied unless you specify them following keyword -chns
. You start counting channels from 1.
The option -replace
allows you to overwrite a specific byte given its track number and offset loc, by the byte whose value is val. This is used for changing the program number associated with a channel. The byte is replaced in the output file. If you use the -replace
option, all other options like -from
, -to
, -chns
etc. are ignored.
abcmatch.exe
- see abcmatch.txt
MIDI stands for "Musical Instrument Digital Interface". MIDI was originally designed to connect a controller, such as a piano-style keyboard, to a synthesizer. A MIDI cable is similar to a serial RS232 cable but uses different voltage levels and an unusual baud rate (31250 baud). The MIDI standard also defines the meaning of the digital signals sent down the cable; pressing and releasing a key produces 2 of these signals, a "note on" followed by a "note off".
There is an additional standard for MIDI files, which describes how to record these signals together with the time when each signal was produced. This allows a complete performance to be recorded in a compact digital form. It is also possible for a computer to write a MIDI file which can be played back in exactly the same way as a MIDI file of a recorded performance. This is what abc2midi does.
If you have downloaded the executables compiled using DJGPP, you may get an error message saying that a DPMI (Dos Protected Mode Interface) server is needed. If you can run the programs from a DOS window within Windows, this may solve the problem. Alternatively, download the DPMI server recommended for DJGPP
, called CWSDPMI.EXE
. This needs to be on your path for the executables to run.
Please report any bugs you find in abc2midi, midi2abc, midicopy, or abcmatch, abc2abc to [email protected] (preferably with an example so that I can replicate the problem). Better still, send me the repaired source files which fix the problem! If you add your own features to the code that other people might want to use then let me know. I may or may not want to add them to the official version. So far I have been maintaining the code, but I don't guarantee anything.