Welcome to the meta-rockchip Yocto BSP layer for Vicharak SBC boards.

This README provides information on building and booting with this layer.

This layer depends on the following components:

• Yocto Project Poky Layer:

  • URI: git://git.yoctoproject.org/poky
  • Branch: mickledore

• OpenEmbedded Layer:

  • URI: git://git.openembedded.org/meta-openembedded
  • Layers: meta-oe
  • Branch: mickledore

• I. Configure Yocto/OE Environment
• II. Building meta-rockchip BSP Layers
• III. Booting Your Device

To build an image with BSP support for a specific release, follow these steps:

1. Create a directory for your Yocto environment and navigate to it:

mkdir yocto; cd yocto

2. Clone the Yocto Poky layer:

git clone git://git.yoctoproject.org/poky -b mickledore

3. Clone the OpenEmbedded layer:

git clone git://git.openembedded.org/meta-openembedded -b mickledore

4. Place the meta-rockchip layer in the same directory.

git clone https://github.com/vicharak-in/meta-rockchip -b mickledore

5. Source the configuration script:

source oe-init-build-env

6. Ensure that your bblayers.conf file includes the location of the meta-rockchip layer along with other required layers.

POKY_BBLAYERS_CONF_VERSION = "2"

BBPATH = "${TOPDIR}"
BBFILES ?= ""

BBLAYERS ?= " \
  ${TOPDIR}/../meta-openembedded/meta-oe \
  ${TOPDIR}/../meta-openembedded/meta-python \
  ${TOPDIR}/../meta-openembedded/meta-networking \
  ${TOPDIR}/../meta-openembedded/meta-filesystems \
  ${TOPDIR}/../meta-openembedded/meta-multimedia \
  ${TOPDIR}/../meta-qt5 \
  ${TOPDIR}/../meta-clang \
  ${TOPDIR}/../meta-rockchip \
  ${TOPDIR}/../poky/meta \
  ${TOPDIR}/../poky/meta-poky \
  ${TOPDIR}/../poky/meta-yocto-bsp \
"

7. To enable a specific machine, add a MACHINE line to your local.conf file.

MACHINE ?= "rk3399-vaaman"

8. Enable systemd in your Yocto configuration by adding the following to your local.conf file

INIT_MANAGER = "systemd"

Once your environment is configured, you can build an image as follows:

bitbake core-image-full-cmdline

core-image-minimal
core-image-full-cmdline
core-image-sato
core-image-weston
meta-toolchain
meta-ide-support

After a successful build, you will find the resulting .wic image in /path/to/yocto/build/tmp/deploy/images/<MACHINE>/, along with a Rockchip firmware image named update.img.

To boot your device under Linux, you can use Rockchip upgrade_tool. Here are the steps:

1. Put your device into Rockusb or Maskrom mode. Learn more

sudo upgrade_tool db <image_path>/loader.bin

2. Flash the firmware image:

Flash the image (either the .wic image or the Rockchip firmware image update.img) to your device.:

For .wic image:

sudo upgrade_tool wl 0 <path/to/yocto/build/tmp/deploy/images/<MACHINE>/<IMAGE_NAME>.wic

For Rockchip firmware image:

sudo upgrade_tool wl 0 <path/to/yocto/build/tmp/deploy/images/<MACHINE>/update.img

MIT License