fluent-plugin-datacounter

Component

DataCounterOutput

Count messages with data matches any of specified regexp patterns in specified attribute.

Counts per min/hour/day
Counts per second (average every min/hour/day)
Percentage of each pattern in total counts of messages

DataCounterOutput emits messages contains results data, so you can output these message (with 'datacount' tag by default) to any outputs you want.

output ex1 (aggregates all inputs): {"pattern1_count":20, "pattern1_rate":0.333, "pattern1_percentage":25.0, "pattern2_count":40, "pattern2_rate":0.666, "pattern2_percentage":50.0, "unmatched_count":20, "unmatched_rate":0.333, "unmatched_percentage":25.0}
output ex2 (aggregates per tag): {"test_pattern1_count":10, "test_pattern1_rate":0.333, "test_pattern1_percentage":25.0, "test_pattern2_count":40, "test_pattern2_rate":0.666, "test_pattern2_percentage":50.0, "test_unmatched_count":20, "test_unmatched_rate":0.333, "test_unmatched_percentage":25.0}

'input_tag_remove_prefix' option available if you want to remove tag prefix from output field names.

Configuration

DataCounterOutput

Count messages that have attribute 'referer' as 'google.com', 'yahoo.com' and 'facebook.com' from all messages matched, per minutes.

<match accesslog.**>
  type datacounter
  unit minute
  aggregate all
  count_key referer
  # patternX: X(1-20)
  pattern1 google google.com
  pattern2 yahoo  yahoo.com
  pattern3 facebook facebook.com
  # but patterns above matches 'this-is-facebookXcom.xxxsite.com' ...
</match>

Or, more exact match pattern, output per tags (default 'aggregate tag'), per hours.

<match accesslog.**>
  type datacounter
  unit hour
  count_key referer
  # patternX: X(1-20)
  pattern1 google ^http://www\.google\.com/.*
  pattern2 yahoo  ^http://www\.yahoo\.com/.*
  pattern3 twitter ^https://twitter.com/.*
</match>

HTTP status code patterns.

<match accesslog.**>
  type datacounter
  count_interval 1m    # just same as 'unit minute' and 'count_interval 60s'
                       # you can also specify '30s', '5m', '2h' ....
  count_key status
  # patternX: X(1-20)
  pattern1 2xx ^2\d\d$
  pattern2 3xx ^3\d\d$
  pattern3 404 ^404$    # we want only 404 counts...
  pattern4 4xx ^4\d\d$  # pattern4 doesn't matches messages matches pattern[123]
  pattern5 5xx ^5\d\d$
</match>

If you want not to include 'unmatched' counts into percentage, use 'outcast_unmatched' configuration:

<match accesslog.**>
  type datacounter
  count_key status
  # patternX: X(1-20)
  pattern1 2xx ^2\d\d$
  pattern2 3xx ^3\d\d$
  pattern3 4xx ^4\d\d$
  pattern4 5xx ^5\d\d$
  outcast_unmatched yes # '*_percentage' fields culculated without 'unmatched' counts, and
                        # 'unmatched_percentage' field will not be produced
</match>

With 'output_per_tag' option and 'tag_prefix', we get one result message for one tag, like below:

<match accesslog.{foo,bar}>
  type datacounter
  count_key status
  pattern1 OK ^2\d\d$
  pattern2 NG ^\d\d\d$
  input_tag_remove_prefix accesslog
  output_per_tag yes
  tag_prefix status
</match>
# => tag: 'status.foo' or 'status.bar'
#    message: {'OK_count' => 60, 'OK_rate' => 1.0, 'OK_percentage' => 70, 'NG_count' => , ....}

And you can get tested messages count with 'output_messages' option:

<match accesslog.{foo,bar}>
  type datacounter
  count_key status
  pattern1 OK ^2\d\d$
  pattern2 NG ^\d\d\d$
  input_tag_remove_prefix accesslog
  output_messages yes
</match>
# => tag: 'datacount'
#    message: {'foo_messages' => xxx, 'foo_OK_count' => ... }

<match accesslog.baz>
  type datacounter
  count_key status
  pattern1 OK ^2\d\d$
  pattern2 NG ^\d\d\d$
  input_tag_remove_prefix accesslog
  output_per_tag yes
  tag_prefix datacount
  output_messages yes
</match>
# => tag: 'datacount.baz'
#    message: {'messages' => xxx, 'OK_count' => ...}

Parameters

count_key (required)

The key to count in the event record.
tag

The output tag. Default is datacount.
tag_prefix

The prefix string which will be added to the input tag. output_per_tag yes must be specified together.
input_tag_remove_prefix

The prefix string which will be removed from the input tag.
count_interval

The interval time to count in seconds. Default is 60.
unit

The interval time to monitor specified an unit (either of minute, hour, or day). Use either of count_interval or unit.
aggregate

Calculate in each input tag separetely, or all records in a mass. Default is tag.
ouput_per_tag

Emit for each input tag. tag_prefix must be specified together. Default is no.
outcast_unmatched

Specify yes if you do not want to include 'unmatched' counts into percentage. Default is no.
output_messages

Specify yes if you want to get tested messages. Default is no.
store_file

Store internal data into a file of the given path on shutdown, and load on starting.

TODO

consider what to do next
patches welcome!

pombredanne / fluent-plugin-datacounter Goto Github PK