plutec / shutterfw Goto Github PK

Steps to reproduce:

• Turn off wifi and device
• Turn on device, wait 1 minute
• Turn on wifi

Behaviour:

• The device does not reconnect to wifi until you press any button (to up or down the shutter).

Alexa doesn't report movement to MQTT

Unable to parse JSON EF470B_RL_2: '{"name":"Relay2","stat_t":"tele/persiana_patio/STATE","avty_t":"tele/persiana_patio/LWT","pl_avail":"Online","pl_not_avail":"Offline","cmd_t":"cmnd/persiana_patio/POWER2","val_tpl":"{{value_json.POWER2}}","pl_off":"OFF","pl_on":"ON","uniq_id":"EF470B_RL_2","dev":{"ids":["EF470B"]}'

For instance, when there is electricity problems, wait a reasonable (configurable time) to give time to WiFi router to start. This will prevent to show your shutters to your neighborhood.

Hello,

I have a MS-108WR. Do you knwon how I can flash it?

I do not find a tutoriel with pinout.

Thank you

Appears as ESPXXXX instead the device name. Solved with this: WiFi.hostname(wifi_hostname.c_str());

Define some intermediate levels, because during the first seconds of opening really does not open the curtain. The visual effect to 50% is not really 50%.

Currently it's using the real value instead the calibrated one.

HA Code generation has hardcoded "Persiana invitados"

When use the virtual button of HA (via MQTT), after reach the end of the movement, the button keep pressed. After that, if you move manually or using Alexa the shutter, it takes the HA button and move again.

Control the shutter using the webpage in the device.