john-the-ripper's Introduction
John the Ripper password cracker. John the Ripper is a fast password cracker, currently available for many flavors of Unix (11 are officially supported, not counting different architectures), Windows, DOS, BeOS, and OpenVMS (the latter requires a contributed patch). Its primary purpose is to detect weak Unix passwords. Besides several crypt(3) password hash types most commonly found on various Unix flavors, supported out of the box are Kerberos/AFS and Windows LM hashes, as well as DES-based tripcodes, plus many more hashes and ciphers in "community enhanced" -jumbo versions and/or with other contributed patches. How to install. See INSTALL for information on installing John on your system. How to use. To run John, you need to supply it with some password files and optionally specify a cracking mode, like this, using the default order of modes and assuming that "passwd" is a copy of your password file: john passwd or, to restrict it to the wordlist mode only, but permitting the use of word mangling rules: john --wordlist=password.lst --rules passwd Cracked passwords will be printed to the terminal and saved in the file called $JOHN/john.pot (in the documentation and in the configuration file for John, "$JOHN" refers to John's "home directory"; which directory it really is depends on how you installed John). The $JOHN/john.pot file is also used to not load password hashes that you already cracked when you run John the next time. To retrieve the cracked passwords, run: john --show passwd While cracking, you can press any key for status, or Ctrl-C to abort the session saving its state to a file ($JOHN/john.rec by default). If you press Ctrl-C for a second time before John had a chance to handle your first Ctrl-C, John will abort immediately without saving. By default, the state is also saved every 10 minutes to permit for recovery in case of a crash. To continue an interrupted session, run: john --restore These are just the most essential things you can do with John. For a complete list of command line options and for more complicated usage examples you should refer to OPTIONS and EXAMPLES, respectively. Please note that "binary" (pre-compiled) distributions of John may include alternate executables instead of just "john". You may need to choose the executable which fits your system best, e.g. "john-mmx" to take advantage of MMX acceleration. Features and performance. John the Ripper is designed to be both feature-rich and fast. It combines several cracking modes in one program and is fully configurable for your particular needs (you can even define a custom cracking mode using the built-in compiler supporting a subset of C). Also, John is available for several different platforms which enables you to use the same cracker everywhere (you can even continue a cracking session which you started on another platform). Out of the box, John supports (and autodetects) the following Unix crypt(3) hash types: traditional DES-based, "bigcrypt", BSDI extended DES-based, FreeBSD MD5-based (also used on Linux and in Cisco IOS), and OpenBSD Blowfish-based (now also used on some Linux distributions and supported by recent versions of Solaris). Also supported out of the box are Kerberos/AFS and Windows LM (DES-based) hashes, as well as DES-based tripcodes. When running on Linux distributions with glibc 2.7+, John 1.7.6+ additionally supports (and autodetects) SHA-crypt hashes (which are actually used by recent versions of Fedora and Ubuntu), with optional OpenMP parallelization (requires GCC 4.2+, needs to be explicitly enabled at compile-time by uncommenting the proper OMPFLAGS line near the beginning of the Makefile). Similarly, when running on recent versions of Solaris, John 1.7.6+ supports and autodetects SHA-crypt and SunMD5 hashes, also with optional OpenMP parallelization (requires GCC 4.2+ or recent Sun Studio, needs to be explicitly enabled at compile-time by uncommenting the proper OMPFLAGS line near the beginning of the Makefile and at runtime by setting the OMP_NUM_THREADS environment variable to the desired number of threads). John the Ripper Pro adds support for Windows NTLM (MD4-based) and Mac OS X 10.4+ salted SHA-1 hashes. "Community enhanced" -jumbo versions add support for many more password hash types, including Windows NTLM (MD4-based), Mac OS X 10.4-10.6 salted SHA-1 hashes, Mac OS X 10.7 salted SHA-512 hashes, raw MD5 and SHA-1, arbitrary MD5-based "web application" password hash types, hashes used by SQL database servers (MySQL, MS SQL, Oracle) and by some LDAP servers, several hash types used on OpenVMS, password hashes of the Eggdrop IRC bot, and lots of other hash types, as well as many non-hashes such as OpenSSH private keys, S/Key skeykeys files, Kerberos TGTs, PDF files, ZIP (classic PKZIP and WinZip/AES) and RAR archives. Unlike older crackers, John normally does not use a crypt(3)-style routine. Instead, it has its own highly optimized modules for different hash types and processor architectures. Some of the algorithms used, such as bitslice DES, couldn't have been implemented within the crypt(3) API; they require a more powerful interface such as the one used in John. Additionally, there are assembly language routines for several processor architectures, most importantly for x86-64 and x86 with SSE2. Documentation. The rest of documentation is located in separate files, listed here in the recommended order of reading: * INSTALL - installation instructions * OPTIONS - command line options and additional utilities * MODES - cracking modes: what they are * CONFIG (*) - how to customize * RULES (*) - wordlist rules syntax * EXTERNAL (*) - defining an external mode * EXAMPLES - usage examples - strongly recommended * FAQ - guess * CHANGES (*) - history of changes * CONTACT (*) - how to contact the author or otherwise obtain support * CREDITS (*) - credits * LICENSE - copyrights and licensing terms (*) most users can safely skip these. Happy reading! $Owl: Owl/packages/john/john/doc/README,v 1.22 2011/10/24 01:58:19 solar Exp $
john-the-ripper's People
Forkers
gonzalo2135 yangjintao doegies urbandigital javierprtd kdxing unforeseenocean fetstarz 0x00-0x00 qualialibre cyberhack255 abraham314 andross2 vlasikov pokemonvortex jerrybibo3 theonionseed cybercircuits iedminster17 littlecodemonkey driveling-discourse ehurkan mtrspringer ahmadaltaha aoedraco luciamees tarun14110 capone5 przechrzta pkadams ksums gitakaal marioscl alfonsostg linz04 sayed0114 jialak killercodes kernelr00ter obntxny ubuntulover09 technically-possible bishal0x01 hswmartin swiss-kn9fe xtraim sp12b xiaowenhao111 melantrix thebluewon sandunamarathunga onlyrubal malikakarsh rtgittn elitzer2 maha-khat sarthak503 manoj-manchalkar thephthiwa viewviewview rubelperez palmerc seolex leeduyong alexandro1501 z3t4byt3 pubnite shadabrasool111 thereaper420 benyg0821 mattymay cx18121 ned-stark117 okaaiiix navkav smirger notoys jesus-antulio abanikanta yuukinaesa w4zt3r rockibkelani devangini16 k4m4 dickytrianza 9lyph deepansharya1111 liegoo ahlame55 aslandn sajols hazwanjaafar rohitmahajan29john-the-ripper's Issues
hccacp2john it doesn't work on mac
command not found is that normal that I would have to install ??? the path is correct
Compilation fails on Debian Testing
Hey!
I am getting this error:
gcc -c -Wall -O2 -fomit-frame-pointer -Wdeclaration-after-statement -I/usr/local/include -mavx -DHAVE_CRYPT -DHAVE_DL -funroll-loops ssh_fmt.c
ssh_fmt.c:56:18: error: field ‘pk’ has incomplete type
56 | EVP_PKEY pk;
| ^~
Any help is appreciated :-)
feature request: sharc2john
can you make a .sharc to john? for extracting the hash from a playstation home ps3 .sharc file?
rar2john not compiling
I am trying to compile john in order to crack a password protected rar file on linux mint
When compiling using the INSTALL-UBUNTU documentation everything installs except REXGEN and when I compile it rar2john is still not there. Is there some specific library that I am missing in order for it to be able to compile the rar2john tool?
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.