pinterest / elixometer Goto Github PK
View Code? Open in Web Editor NEWA light Elixir wrapper around exometer.
Home Page: https://hexdocs.pm/elixometer
License: Apache License 2.0
A light Elixir wrapper around exometer.
Home Page: https://hexdocs.pm/elixometer
License: Apache License 2.0
The README current states:
Presently, Elixometer supports timers, histograms, gauges, and counters.
But @dantame reports the code may also support spirals.
When people (or mistake in the script) forget to put value for env, it will output the same
value as if "prod" has been put in. It looks like it hides a mistake, and makes is a hard to find error.
Suggest to make env a required settings, not optional, during init for least surprises.
File: elixometer/lib/elixometer.ex
def name_to_exometer(metric_type, name) when is_bitstring(name) do
config = Application.get_all_env(:elixometer)
prefix = config[:metric_prefix] || "elixometer"
base_name = case config[:env] do
nil -> "#{prefix}.#{metric_type}.#{name}" <<<<<<<<<<<<<<<<<<<<<<<
:prod -> "#{prefix}.#{metric_type}.#{name}" <<<<<<<<<<<<<<<<<<<<<<
env -> "#{prefix}.#{env}.#{metric_type}.#{name}"
end
Also counters is initiated using HashDict but later accessed via Dict
Code happens to pass tests for now because both are alias to each other.
Reference:
see WARNING: this module is deprecated
http://elixir-lang.org/docs/stable/elixir/Dict.html
http://elixir-lang.org/docs/stable/elixir/HashDict.html
Better just use Map.
PR #32
π I'm relatively new to Elixir and was wondering how the @timed
annotation worked, so I investigated the codebase a bit.
I found that the function used to test the @timed
annotation with a guard condition, had a very slightly different function name to the one above it - my_other_timed_method2
instead of my_other_timed_method
.
When I ran the tests after removing the 2
from the function name, I got this error, but I had expected it to work:
** (ArgumentError) cannot make function my_other_timed_method/1 overridable because it was not defined
(elixir) lib/module.ex:1006: anonymous fn/2 in Module.make_overridable/2
Is this a limitation of elixometer or of Elixir annotations?
https://github.com/pinterest/elixometer/blob/master/test/elixometer_test.exs#L24-L31
I am attempting to use elixometer in a Phoenix app. However, when I try to use update_histogram
and the exometer_report_tty
, I get the following crash:
10:34:31.086 [error] CRASH REPORT Process exometer_report_tty with 0 neighbours crashed with reason: bad argument in call to erlang:'++'(<<"histograms">>, [95|<<"test">>]) in exometer_report_tty:metric_to_string/1 line 116
I am simply doing Elixometer.update_histogram("test", 1)
in a test controller.
I created a sample project.
Environment:
Mac OS X (El Capitain)
Erlang/OTP 19 [erts-8.2.2] [source] [64-bit] [smp:8:8] [async-threads:10] [hipe] [kernel-poll:false] [dtrace]
Elixir 1.4.2
meck is mocking libraries, for prod environment, there is no need to distribute as such. Add only:[:dev, :test] as constraint ?
edown is usually markdown for doc generation? only: [:dev, :test, :doc]?
Bear with me because I'm not sure if this is due to elixometer, exometer_core, exometer_influxdb, or some combination of the three.
Here's what my config looks like:
config :exometer_core,
report: [
reporters: [
exometer_report_influxdb: [
protocol: :https,
host: "influxdb.appcues.net",
username: System.get_env("INFLUXDB_USER"),
password: System.get_env("INFLUXDB_PASS"),
port: 8086,
db: "metrics",
timestamping: true
]
]
]
config :elixometer,
reporter: :exometer_report_influxdb,
env: Mix.env,
metric_prefix: "event_ingester"
I then call this once:
update_spiral("web.ping", 1)
When I query the measurement in InfluxDB, it looks like this:
SELECT * FROM event_ingester_spirals_web_ping
time | count | host | one |
---|---|---|---|
2016-11-03T20:06:18.995495995Z | 1 | "65b56de2e2b2" | |
2016-11-03T20:06:19.76431866Z | 1 | "65b56de2e2b2" | |
2016-11-03T20:06:19.768817958Z | "65b56de2e2b2" | 1 | |
2016-11-03T20:06:20.764425275Z | "65b56de2e2b2" | 1 | |
2016-11-03T20:06:20.768760131Z | 1 | "65b56de2e2b2" | |
2016-11-03T20:06:21.764176139Z | 1 | "65b56de2e2b2" | |
2016-11-03T20:06:21.775893812Z | "65b56de2e2b2" | 1 | |
2016-11-03T20:06:22.763868246Z | "65b56de2e2b2" | 1 | |
2016-11-03T20:06:22.768669734Z | 1 | "65b56de2e2b2" | |
2016-11-03T20:06:23.764132114Z | 1 | "65b56de2e2b2" |
It looks like there are two measurements sent every second and for some reason the value is under count
for some and one
for others. If I change the measurements to a count, something similar happens with the count
being sent in one instance and ms_since_reset
being sent in the other instance.
A default formatter Elixometer.Utils
is called instead of a configured one:
Line 292 in c4a886b
To fix, Elixometer.Utils
should either expose the configured formatter, or implement clear_counter/1
.
Exposing formatter is preferable, because there are often situations where an application may need to translate metric names between "Elixometer view" and "exometer view".
When application is started, it error on :logger. exometer and other dependency projects uses :lager. Application starts with the built in logger instead.
Supervisor: {local,'Elixir.Logger.Supervisor'}
Context: child_terminated
Reason: normal
Offender: [{pid,<0.183.0>},{id,'Elixir.Logger.ErrorHandler'},{mfargs,{'Elixir.Logger.Watcher',watcher,[error_logger,'Elixir.Logger.ErrorHandler',{true,false,500},link]}},{restart_type,permanent},{shutdown,5000},{child_type,worker}]
What benefits do I get from using this over directly using exometer? What trade-offs were made (i.e. is there any downside to using this)?
Following the docs and trying to set up elixometer with influxDB, I get the following error on the first call to Elixometer.update_counter/2. I've not found any configuration changes that get the subscription step to succeed.
I've set up a small example repo displaying the problem: https://bitbucket.org/kmeehl/exotest
** (Protocol.UndefinedError) protocol Enumerable not implemented for nil. This protocol is implemented for: Date.Range, File.Stream, Function, GenEvent.Stream, HashDict, HashSet, IO.Stream, List, Map, MapSet, Range, Stream
(elixir) lib/enum.ex:1: Enumerable.impl_for!/1
(elixir) lib/enum.ex:116: Enumerable.reduce/3
(elixir) lib/enum.ex:1832: Enum.map/2
(elixometer) lib/elixometer.ex:352: Elixometer.create_subscription/1
(elixometer) lib/elixometer.ex:309: Elixometer.handle_call/3
(stdlib) gen_server.erl:636: :gen_server.try_handle_call/4
(stdlib) gen_server.erl:665: :gen_server.handle_msg/6
(stdlib) proc_lib.erl:247: :proc_lib.init_p_do_apply/3
(elixir) lib/gen_server.ex:774: GenServer.call/3
(elixometer) lib/elixometer.ex:293: Elixometer.ensure_registered/2
(elixometer) lib/updater.ex:79: Elixometer.Updater.do_update/1
(elixir) lib/enum.ex:675: Enum."-each/2-lists^foreach/1-0-"/2
(elixir) lib/enum.ex:675: Enum.each/2
(elixometer) lib/updater.ex:50: Elixometer.Updater.handle_info/2
(stdlib) gen_server.erl:616: :gen_server.try_dispatch/4
(stdlib) gen_server.erl:686: :gen_server.handle_msg/6
Last message: {:mail, #PID<0.279.0>, [{:counter, "Exoteststartcount", 1, nil}], 1, 0}
Upgrade all elixir project to use same version as in elixir-thrift:
reference
pinterest/elixir-thrift@1240703
Will be immensely helpful to have version branch or tag on top of mix version on master branch
defp deps do
[
{:meck, github: "eproxus/meck", tag: "0.8.2", override: true},
{:edown, github: "uwiger/edown", tag: "0.7", override: true},
{:lager, github: "basho/lager", tag: "2.1.0", override: true},
{:exometer, github: "pspdfkit-labs/exometer"},
{:netlink, github: "Feuerlabs/netlink", ref: "d6e7188e", override: true},
]
end
The overrides gives me some problem when compiling with other packages (like erlcloud for example).
I get "different specs were given for the meck app".
If my understanding is right, only one reporter is supported in Elixometer at the moment, right? If so, is there anyway to support multiple ones?
For any function in my application, if I make a call to, say, update_counter or clear_counter, dialyzer will report that my application's function has no local return. Removing the call to update_counter or clear_counter causes the dialyzer warning to go away. Why is this?
I was debugging why the counter is incompatible with datadog statsd counters. I found that the type reported to statsd is gauge. I read at https://github.com/pinterest/elixometer/blob/master/lib/updater.ex#L86 that the type passed to exometer is always a gauge update
rather than counter (or other type) specific functions.
Is this expected behavior?
Under Elixir 1.6.0-dev, as well as Elixir 1.5.2 the following code:
defmodule Mod do
use Elixometer
@timed(key: "key")
def my_fun do
:ok
end
def hello do
IO.puts(inspect my_fun())
end
end
returns [do: :ok]
iex(1)> Mod.hello
[do: :ok]
:ok
Looks like this line might be to blame.
Seeing a genserver timeout via ensure_registered
. What's weird is that genserver message ({:subscribe,...}
) should only be called when the metric hasn't been registered before, but the metric should be registered because we have plenty of data points for the metric in question within the same session. This starts to happen when the system is under heavy load (and after the system has been running for several hours).
Trace:
GenServer Elixometer.Updater terminating
** (stop) exited in: GenServer.call(Elixometer, {:subscribe, ["my_app_prefix", "timers", "namespace", "of", "my", "module", "function"]}, 5000)
** (EXIT) time out
(elixir) lib/gen_server.ex:924: GenServer.call/3
(elixometer) lib/elixometer.ex:372: Elixometer.ensure_registered/2
(elixometer) lib/updater.ex:108: Elixometer.Updater.do_update/2
(elixir) lib/enum.ex:765: Enum.-each/2-lists^foreach/1-0-/2
(elixir) lib/enum.ex:765: Enum.each/2
(elixometer) lib/updater.ex:45: Elixometer.Updater.handle_info/2
(stdlib) gen_server.erl:637: :gen_server.try_dispatch/4
(stdlib) gen_server.erl:711: :gen_server.handle_msg/6
Any thoughts on what could cause this?
Anyone have luck getting this to compile with Erlang 19?
Any reason to not have this package on Hex?
We are planning to use elixometer to send metrics to datadog (with exometer_datadog). I know it's possible with some of datadog's libraries to set tags on metrics. For example, the my_app_api_endpoint
metric could have a status_code
tag to record what code the method returned, a method
tag to record what the HTTP method was, and an endpoint
tag to record the endpoint.
Is there a way to record tags when updating a metric, maybe with optional parameters in a call like update_spiral("metrics_test.\#{thingie}.qps", 1)
? I looked through the source code, but it was not obvious whether this is supported.
While runing "mix ecto.create" or "mix phoenix.server" getting below error
** (Mix) Could not compile dependency :ranch, "/home/cloud-user/.mix/rebar3 bare compile --paths "/home/cloud-user/myapp/_build/dev/lib/*/ebin"" command failed. You can recompile this dependency with "mix deps.compile ranch", update it with "mix deps.update ranch" or clean it with "mix deps.clean ranch"
And i am using below versions:
[cloud-user@msd-postgresql ~]$ elixir -v
Erlang/OTP 21 [erts-10.0] [source] [64-bit] [smp:4:4] [ds:4:4:10] [async-threads:1] [hipe]
Elixir 1.7.0 (compiled with Erlang/OTP 19)
[cloud-user@msd-postgresql ~]$
Can you please provide any solution , how to fix it...
Hi!
I'm just wondering how I might access predefined exomter reports. I tried to add a predefined
section to the config but that didn't work:
# Configure Elixometer Instrumentation
config(:exometer_core,
report: [
reporters: [
{:exometer_report_tty, []}
]
],
predefined: [
{
~w(erlang memory)a,
{:function, :erlang, :memory, [], :proplist, ~w(atom binary ets processes total)a},
[]
},
{
~w(erlang statistics)a,
{:function, :erlang, :statistics, [:'$dp'], :value, [:run_queue]},
[]
}
])
config(:elixometer, reporter: :exometer_report_tty,
env: Mix.env,
metric_prefix: "bms")
It would be nice to have only exometer_core
as a dependency (instead of the whole exometer
) and also get rid of netlink
.
P.S.: awesome library in every other aspect, thanks!
Let's say we have metrics app.dev.spirals.registered.user.us
and app.dev.spirals.registered.user.ca
- correct me if I'm wrong, but as of now there's no way to get accumulated value for app.dev.spirals.registered.user._
with Elixometer. It is possible to either introduce a new key like app.dev.spirals.registered.user.total
or use :exometer.get_values/1
function, which allows wildcards, directly (:exometer.get_values([:app, :dev, :spirals, :registered, :user, :_])
. Both are possible to go with, however I think it would be best to implement call to Exometer.get_values/1
via Elixometer to simplify dealing with keys (which should be list of atoms for Exometer) and results parsing (which is a list of all results found for wildcard).
I'm following the instructions in the readme and this happens
Elixir 1.3.2
Phoenix 1.2.1
** (Mix) Could not compile dependency :exometer_core, "/Users/romariolopezc/.mix/rebar3 bare compile --paths "/Users/romariolopezc/Repos/Phoenix/soranus/_build/dev/lib/*/ebin"" command failed. You can recompile this dependency with "mix deps.compile exometer_core", update it with "mix deps.update exometer_core" or clean it with "mix deps.clean exometer_core"
mix deps.compile exometer_core
===> Compiling exometer_core
===> Compiling /Users/romariolopez/Repos/Phoenix/soranus/deps/exometer_core/src/exometer_report.erl failed
/Users/romariolopez/Repos/Phoenix/soranus/deps/exometer_core/src/exometer_report.erl:none: error in parse transform 'lager_transform': {function_clause,
[{lager_transform,
'-walk_ast/2-fun-0-',
[{typed_record_field,
{record_field,251,
{atom,251,reporter}},
{type,251,union,
[{type,251,module,[]},
{atom,251,'_'}]}}],
[{file,
"/Users/romariolopez/Repos/Phoenix/soranus/deps/lager/src/lager_transform.erl"},
{line,62}]},
{lists,map,2,
[{file,"lists.erl"},
{line,1239}]},
{lager_transform,walk_ast,2,
[{file,
"/Users/romariolopez/Repos/Phoenix/soranus/deps/lager/src/lager_transform.erl"},
{line,62}]},
{compile,
'-foldl_transform/2-anonymous-2-',
2,
[{file,"compile.erl"},
{line,958}]},
{compile,foldl_transform,2,
[{file,"compile.erl"},
{line,960}]},
{compile,
'-internal_comp/4-anonymous-1-',
2,
[{file,"compile.erl"},
{line,315}]},
{compile,fold_comp,3,
[{file,"compile.erl"},
{line,341}]},
{compile,internal_comp,4,
[{file,"compile.erl"},
{line,325}]}]}
** (Mix) Could not compile dependency :exometer_core, "/Users/romariolopez/.mix/rebar3 bare compile --paths "/Users/romariolopez/Repos/Phoenix/soranus/_build/dev/lib/*/ebin"" command failed. You can recompile this dependency with "mix deps.compile exometer_core", update it with "mix deps.update exometer_core" or clean it with "mix deps.clean exometer_core"
There is a TestReport In file https://github.com/pinterest/elixometer/blob/master/lib/elixometer.ex
I notice that is is being used in test:
https://github.com/pinterest/elixometer/blob/master/config/test.exs
But is that just for Test environment, but for some reason, it si part of the main module?
If production won't ever use or it, would suggest this should not be part of main module.
What is the rationale behind a process gateway in front of exometer?
I'm scratching my head and trying to figure out why is everything proxied through a single gen server instance.
I can see an ETS table that keeps track of subscriptions/metrics defined and a periodic tick that resets counters. It somewhat justifies the need of having a dedicated process, however am I wrong in thinking that exometer_core
does that on its own anyway? π€
The README states:
The optional update_frequency key of the :elixometer config controls the interval between reports. By default this is set to 1000 ms in the dev environment and 20 ms in the test environment.
But update_frequency
doesn't seem to have a default for me. If I remove all my config code for elixometer, I get this:
Application.get_all_env(:elixometer)
[included_applications: []]
It does not look like the config of Elixometer is getting pulled into my app.
For every subscribe call it is calling application:gen_all_env..., though I suspect subscribe call is not that frequent.
Would moving get_all_env to init phase and store in state be better?
How about getting the config settings before starting the worker. If getting settings error-ed out(I assume that is essential info for worker to work), supervisor then does not need to start worker then restart etc.
File: elixometer/lib/elixometer.ex
def handle_call({:subscribe, name}, _caller, state) do
cfg = Application.get_all_env(:elixometer) <-----
reporter = cfg[:reporter] # <--- looks like this is relatively constant
interval = cfg[:update_frequency] # <-- looks like this is relatively constant
I've been looking into integrating elixometer with one of our applications that has quite a few histograms in it. Because elixometer subscribes to all the datapoints of a metric, this means I get 11 datapoint outputs for each histogram, when I'm usually only interested in 2 or 3 of them. It's not a massive problem, but it'd be nice if elixometer had some way of customising which datapoints of a metric are subscribed to.
A configurable blacklist of datapoints seems like it'd be the simplest option, if not very flexible.
Happy to put together a PR for this if it sounds like something that would be accepted.
Iβm having trouble getting Elixometer to work with statsd when statsd is running on a server other than localhost.
Everything works fine when running it locally, but when I have the app running on a different machine than statsd, it doesnβt work. My firewall does allow UDP requests from the app server to port 8125 of the statsd server, so I don't think it's a networking problem.
I can successfully update statsd from the app server with a bash command. I can even successfully update statsd from the app console on my server using :os.cmd
. It is only when I go through Elixometer/exometer_core/exometer_report_statsd that nothing happens.
Here is the config that works on my local machine:
config :elixometer,
reporter: :exometer_report_statsd,
update_frequency: 5_000,
env: Mix.env,
metric_prefix: "myapp"
config :exometer_core, report: [
reporters: [
exometer_report_statsd: [
host: "localhost",
port: 8125
]
]
]
And here is the config on the app server:
config :elixometer,
reporter: :exometer_report_statsd,
update_frequency: 5000,
env: Mix.env,
metric_prefix: "hydrogen"
config :exometer_core, report: [
reporters: [
exometer_report_statsd: [
host: "10.0.0.6",
port: 8125
]
]
]
I can use the following bash command to update statsd successfully (I run this from the same server as the app):
echo "deploys.test.myservice:1|c" | nc -w 1 -u 10.0.0.6 8125
I know this may not specifically be Elixometer's fault, but I'm running out of ideas to get this working π
Each time the tests run I get the following output. Is there a way to disable it? It is very annoying.
Running tests...
11:14:25.246 [error] Supervisor 'Elixir.Logger.Supervisor' had child 'Elixir.Logger.ErrorHandler' started with 'Elixir.Logger.Watcher':watcher(error_logger, 'Elixir.Logger.ErrorHandler', {true,false,500}, link) at <0.270.0> exit with reason normal in context child_terminated
11:14:25.285 [info] Application lager started on node nonode@nohost
11:14:25.317 [info] Setup running ...
11:14:25.318 [info] Directories verified. Res = ok
11:14:25.318 [info] Setup finished processing hooks (Mode=normal)...
11:14:25.318 [info] Application setup started on node nonode@nohost
11:14:25.358 [info] Starting reporters with [{reporters,[{exometer_report_statsd,[{hostname,"localhost"},{port,8125}]}]},{subscribers,[{exometer_report_statsd,[my_app,webapp,resp_time],[min,max,mean,'95','90'],1000,true},{exometer_report_statsd,[my_app,ecto,query_exec_time],[min,max,mean,'95','90'],1000,true},{exometer_report_statsd,[erlang,memory],[atom,binary,ets,processes,total],1000,true},{exometer_report_statsd,[my_app,webapp,resp_count],one,1000,true},{exometer_report_statsd,[my_app,ecto,query_count],one,1000,true},{exometer_report_statsd,[erlang,statistics],run_queue,1000,true}]}]
11:14:25.359 [info] Application exometer_core started on node nonode@nohost
11:14:25.361 [info] exometer_report_statsd([{hostname,"localhost"},{port,8125}]): Starting
11:14:25.370 [info] Application exometer started on node nonode@nohost
11:14:25.378 [info] Application pobox started on node nonode@nohost
11:14:25.398 [info] Application elixometer started on node nonode@nohost
11:14:25.510 [info] Application my_app started on node nonode@nohost
11:14:25.835 [info] Application ex_unit started on node nonode@nohost
11:14:25.847 [info] Application ex_machina started on node nonode@nohost
Is there a specific reason why you would treat production environment as an exception?
https://github.com/pinterest/elixometer/blob/master/lib/utils.ex#L14
README is quite limited in content organization.
suggestion:
https://pages.github.com/
Other calls is querying for the pid using the name, add_counter is not.
File: elixometer/lib/elixometer.ex
defp add_counter(metric_name, ttl_millis) do
GenServer.cast(__MODULE__, {:add_counter, metric_name, ttl_millis}) <---
end
def ensure_subscribed(name) do
if not metric_subscribed?(name) do
GenServer.call(Process.whereis(__MODULE__), {:subscribe, name}) <---
end
end
The following code using @timed
reports 1 microsecond time. The timed/1
macro seems to work correctly.
defmodule Repro do
use Elixometer
def hello do
:dbg.tracer()
:dbg.p(:all, :c)
:dbg.tpl(Elixometer.Updater, :timer, :x)
Repro.time_me()
end
@timed(key: "timedkey")
def time_me do
:timer.sleep(1500)
end
end
iex(1)> Repro.hello
(<0.245.0>) call 'Elixir.Elixometer.Updater':timer(<<"timedkey">>,microsecond,1)
(<0.245.0>) returned from 'Elixir.Elixometer.Updater':timer/3 -> ok
:ok
Line 71 in c4a886b
This issue tracks progress toward tagging version 1.3.0, including a hex.pm release.
I have configured the mix.exs and config.exs as per the doc and my application is up and running. I want to know how to view the metrics measured or captured through Elixometer. Please provide me a flow on how to approach on viewing the metrics or configuring them.
Trying to configure the elixometer
Everything complies without any problem but then trying to submit anything i'm getting this error:
iex(10)> Elixometer.update_counter "foo", 1
** (ArgumentError) argument error
(stdlib) gen_fsm.erl:215: :gen_fsm.send_event/2
Details:
OSX 10.11.6
Erlang/OTP 18
Elixir 1.2.6
Phoenix 1.2
# mix.exs
{:elixometer, "~> 1.2"}, # same result with latest module from master
{:exometer_core, "~> 1.4", override: true},
{:lager, "3.0.2", override: true},
{:hackney, "~> 1.4.4", override: true},
Config:
# Copied from readme, other reporters fail as well
config(:exometer_core, report: [reporters: [{:exometer_report_tty, []}]])
config(:elixometer, reporter: :exometer_report_tty,
env: Mix.env,
metric_prefix: "myapp")
$ iex -S mix phx.server
Erlang/OTP 20 [erts-9.0.4] [source] [64-bit] [smp:8:8] [ds:8:8:10] [async-threads:10] [hipe] [kernel-poll:false] [dtrace]
===> Compiling setup
src/setup.erl:166: Warning: export_all flag enabled - all functions will be exported
./rebar skip_deps=true escriptize
make: ./rebar: No such file or directory
make: *** [escriptize] Error 1
===> Hook for compile failed!
** (Mix) Could not compile dependency :setup, "/Users/alan/.mix/rebar3 bare compile --paths "/Users/alan/Code/example-phx-app/_build/dev/lib/*/ebin"" command failed. You can recompile this dependency with "mix deps.compile setup", update it with "mix deps.update setup" or clean it with "mix deps.clean setup"
I had to install the old version of rebar
, not rebar3
, to make it work:
$ brew install rebar
This might be worth adding to your setup instructions.
We use Module.make_overridable/2
as part module compilation step. This is deprecated for private functions, as show here from our unit test run:
warning: making private functions (secret_timed/0 in this case) overridable is deprecated
(elixir) lib/module.ex:815: anonymous fn/2 in Module.make_overridable/2
(stdlib) lists.erl:1338: :lists.foreach/2
(elixometer) lib/elixometer.ex:135: Elixometer."-MACRO-__before_compile__/2-fun-0-"/2
(elixir) lib/enum.ex:1229: Enum."-map/2-lists^map/1-0-"/2
(elixir) lib/enum.ex:1229: Enum."-map/2-lists^map/1-0-"/2
We can easily avoid this warning in our tests by making secret_timed/0
non-private, but we should revisit this approach in general and do one of the following:
** (Mix) Could not compile dependency :meck, "/home/ashu/.mix/rebar compile skip_deps=true deps_dir="/home/ashu/Documents/learn/elixir/elixir_todo_app/_build/dev/lib"" command failed. You can recompile this dependency with "mix deps.compile meck", update it with "mix deps.update meck" or clean it with "mix deps.clean meck"
I'm looking for a pragmatic way to send metrics (via UDP) to Logstash with elixometer.
We want to use Logstash to transform logs and store them in Elasticsearch for analysis in Kibana.
As I don't come from an Erlang background, I have a hard time understanding how to utilize reporters and what the relation between elixometer, exometer and lager is.
So far, I've identified the following options:
:exometer_report_tty
and lager_logger without success).I'd appreciate any hints, especially on making a custom UDP JSON reporter. I think it would be a great addition to elixometer to have that option included, so if I find a way to make it, I'd be happy to send a PR!
Following the docs and trying to add
{:exometer, github: "PSPDFKit-labs/exometer_core"}
to my deps. However, I get "(Mix) Command "git --git-dir=.git checkout --quiet HEAD" failed" when I run mix deps.get
:
$ mix deps.get
* Getting elixometer (https://github.com/pinterest/elixometer.git)
remote: Counting objects: 339, done.
remote: Compressing objects: 100% (12/12), done.
remote: Total 339 (delta 0), reused 0 (delta 0), pack-reused 326
Receiving objects: 100% (339/339), 82.48 KiB | 0 bytes/s, done.
Resolving deltas: 100% (176/176), done.
* Getting exometer (https://github.com/PSPDFKit-labs/exometer_core.git)
remote: Counting objects: 628, done.
remote: Compressing objects: 100% (2/2), done.
remote: Total 628 (delta 0), reused 2 (delta 0), pack-reused 626
Receiving objects: 100% (628/628), 585.82 KiB | 0 bytes/s, done.
Resolving deltas: 100% (385/385), done.
* Getting lager (git://github.com/basho/lager.git)
remote: Counting objects: 3496, done.
remote: Total 3496 (delta 0), reused 0 (delta 0), pack-reused 3496
* Getting parse_trans (git://github.com/uwiger/parse_trans.git)
remote: Counting objects: 797, done.
remote: Total 797 (delta 0), reused 0 (delta 0), pack-reused 797
* Getting setup (git://github.com/uwiger/setup.git)
remote: Counting objects: 582, done.
remote: Total 582 (delta 0), reused 0 (delta 0), pack-reused 582
* Getting edown (git://github.com/uwiger/edown.git)
remote: Counting objects: 965, done.
remote: Compressing objects: 100% (16/16), done.
remote: Total 965 (delta 0), reused 16 (delta 0), pack-reused 949
error: pathspec 'HEAD' did not match any file(s) known to git.
** (Mix) Command "git --git-dir=.git checkout --quiet HEAD" failed
Did some spelunking and I see that the setup
dependency pulls in edown
like so:
{deps, [{edown, ".*", {git, "git://github.com/uwiger/edown.git", "HEAD"}}]}
which I believe mix is interpreting as a ref (hence the error message above). However, I am not really sure what to do about it.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
π Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. πππ
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google β€οΈ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.