pharo-iot / pharothings Goto Github PK

Before step 5. in the setup guide we should also add the command which allows a quick test, if the "wiringPi" library is already installed as needed.

So that we can have analog inputs with an inspector on the MCP3008 chip.

https://github.com/SquareBracketAssociates/Booklet-APharoThingsTutorial

1 - Open remote connection
2 - Open the remote browser, edit some method and save
3 - DON'T close the remote browser
4 - Disconnect the session using "TlpRemoteIDE disconnectAll"

Now if you connect again, is not possible to work on remote browser, because it lost the connections references.

When we change the code and save it, the code is saved but the response from the server can not come back because the reference was lost.

1 - Open remote connection
2 - Open the remote browser, edit some method and save
3 - Remove the network cable from the Raspberry

If you try to close the browser window, the IDE will freeze. But you can use CMD +. and close all windows.

If you type something in the code browser, the IDE will freeze. But when the IDE is frozen, you press CMD +. and release. But if you select another method again or try to close the browser window, the IDE will freeze and you can use CMD +. often and it doesn't work, it freezes over with many "unwind error" error windows. Now everything is frozen. We need to "force quit" Pharo.

1 - Open remote connection
2 - Open the remote browser, edit some method and save
3 - Close the remote browser
4 - Remove the network cable from the Raspberry

Now if you try to disconnect your client session with "TlpRemoteIDE disconnectAll", Pharo IDE freezes, because it is waiting for some answer of the server.

configureComplexDevice: aDevice
aDevice configureForRpiBoard3B: self

is dead code