panoriega / netbook-installer Goto Github PK

What steps will reproduce the problem?
1.Boot with internal SSD loaded with SL
2.
3.

What netbook are you using this on? Mini 9 with Super Talent 16GB SSD


What is the expected output? What do you see instead? Expect to see
internal SSD on desktop, it is not visible.  SL on the SSD is able to boot
and run.  The SSD is recognized in System Profiler, but not in Startup Disk
in System Preferences.


What version of the product are you using? On what operating system?  NBM
0.8.2 and Snow Leopard 10.6


Please provide any additional information below.  Thanks for all of your
hard work.

What steps will reproduce the problem?
1. click (and hold) on the batterybar at the status bar to show the detailed 
infos of the battery

What netbook are you using this on?
Dell Mini 9


What is the expected output? What do you see instead?
The correct Battery-Lifetime / Time-Left-Till-Empty stats / wrong stats

What version of the product are you using? On what operating system?
netbookinstaller 0.8.2 rc4 / os x 10.5.8

What steps will reproduce the problem?
1. trackpad tap
2. trackpad edge scrolling

What netbook are you using this on?
Lenovo s10

What is the expected output? What do you see instead?
1. Tap clicking is unsconsistent
2. Edge scrolling is too fast

What version of the product are you using? On what operating system?
NetbookBootMaker 0.8.2 RC4
NetbookInstaller 0.8.2
OS X 10.5.8

Please provide any additional information below.
Is it possible to add the choice between different drivers for trackpad 
and audio to be installed?

What steps will reproduce the problem?
1.  Fine with clean install of SL with 0.8.2 rc4 (HD listed as internal with 
internal icon)
2.  After updating to 0.8.2 release, HD now listed as external with external 
icon
3.

What netbook are you using this on? mini 10v


What is the expected output? What do you see instead? Would expect internal HD 
to be read as 
internal


What version of the product are you using? On what operating system? 0.8.2 
release on SL (10.6)


Please provide any additional information below.

What steps will reproduce the problem?
1.disable bluetooth from dell utilities in windows xp
2.install os x on dell mini 10v
3.

What netbook are you using this on?
dell mini 10v

What is the expected output? What do you see instead?
bluetooth preference pane, bluetooth listed in system devices list. Instead 
nothing, empty, no 
device.

What version of the product are you using? On what operating system?
bios 005, os x 10.5.8, os x 10.6, os x 10.6.1

Please provide any additional information below.

What steps will reproduce the problem?
1.
2.
3.

What netbook are you using this on?


What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?


Please provide any additional information below.

For the Dell Mini 9 / Vostro A90 WWAN (Dell 5530) to work out of the box, the 
attached modem 
script (courtesy of Ross Barkman, mobilebroadbandrocks.com) needs to be 
installed in 
<code>/Library/Modem Scripts/</code>

The user then needs to select this modem script in the network preference pane 
and put their 
APN in the phone number box to connect. Debug messages are sent to the console.

It would be preferable if NetbookInstaller could automatically install this 
script on Mini 9s / 
Vostro A90s.

<code>ioreg | grep "5530 HSPA"</code>

returns nothing if there is no WWAN module installed, although I doubt this 
check is necessary as 
the script doesn't do anything unless the user selects it and tries to connect, 
and the script itself 
is very small (<10Kb)

What steps will reproduce the problem?
1. No sound

What netbook are you using this on?
Dell Mini 9

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?
10.6 / Netbook-installer 0.8.2

Please provide any additional information below.

What steps will reproduce the problem?
1. Sleep
2. Wake-up
3. Bluetooth resets but Wifi is lost and hovering over it gives beachball

What netbook are you using this on?
mini 9

What is the expected output? What do you see instead?
Working wifi

What version of the product are you using? On what operating system?
OS 10.6 / NBI 0.8.2 alpha

Please provide any additional information below.

What steps will reproduce the problem?
1. Run netbook installer
2. Select "Install general extensions"

What is the expected output? What do you see instead?
I'm expecting that the audio fix will be installed for
the Dell Mini 10v. Instead, no audio fix is installed.

What version of the product are you using? On what operating system?
0.8.2RC2 - MacOSX 10.5.8

change OSInstall.mpkg 
and /System/Library/PrivateFrameworks/Install.framework/Frameworks/OSInstal
l.framework/Versions/A/OSInstall to boot from usb key and install to mbr 
partition.

see prasys.co.cc/2009/08/installing-snow-leopard-for-osx86/

Patches exist to make hibernation work with chameleon

What steps will reproduce the problem?
1.
2.
3.

What netbook are you using this on?
Lenovo S10


What is the expected output? What do you see instead?
Does not work


What version of the product are you using? On what operating system?    OSX
10.6


Please provide any additional information below.

Suggested Enhancement: I know those of us who have done the swap are in the
minority and thus low priority, but since you're going to be reworking the
synaptics driver in the near future, it'd be nice to have
configurations/drivers for the mini10's Elantech multi-touch touchpad as well.

By default, OSx seems to see this touchpad as a regular mouse and therefore
allows very basic configuration through the mouse prefpane. Ideally, it'd
be a nice enhancement to allow access to the same touchpad prefpane used
for multi-touch macintoshes, but added support for this trackpad to your
synaptics prefpane would be acceptable.

What netbook are you using this on?
Mini10v using .8.2 and OSx 10.5.8

What works out of the box:
* Single finger tap to click is 100% reliable.
* Two finger scrolling works as expected.
* Two-finger taps seems to act as a middle mouse click.
* Three-finger taps brings up the right click context menu.
* Double-tapping to drag.
* Hardware buttons work without any of the jumpiness of the of the stock
10v touchpad.

Features needed for macintosh multitouch parity:
* Three finger flicks - flick left = go back/to the left/next page/etc,
flick right = go forward/to the right/next page/etc.
* Four finger flicks - left/right switches apps (brings up the cmd+tab
interface), flick down hides all apps (just like expose), and flick up
shows them all (expose show all windows).
* Rotation gestures - rotate two fingers on the trackpad to rotate stuff.
* Pinch gestures - zoom in/out

Threads about the switch:
http://www.mydellmini.com/forum/dell-mini-10v-mac-os-x-discussion/11089-10v-10-t
ouchpad-switch-information-osx.html
http://www.mydellmini.com/forum/dell-mini-10-guides/12431-guide-mini-10-touchpad
-into-mini-10v.html

I'd be willing to help with any further information you may need as well as
any beta testing. As always, thank you meklort for all the hard work!

What steps will reproduce the problem?
1. Create install media as instructed for Snow Leopard
2. Boots installer, hangs at "remaining 7 minutes"

Computer is Compaq Mini 700 (similar to HP Mini 1000), stock 60 Gb disk, 2Gb 
RAM, installing 
from a partition on a USB drive.

Booted ok, everything seems to work at first glance, partitioned the disk and 
started the install, 
until it hangs, while waiting for a file.

Log shows "OSInstaller [154] : /postinstall : cp : 
/Volumes/ramdisk/dsdt/latest_dsdl.dsl : No 
such file or directory" repeatedly, as happened to LeMaurien19. 
(http://mymacbookmini.blogspot.com/2009/09/nothings-perfect.html).

Computer just sits there at the 7 min mark, working, but not proceeding the 
installation.

What steps will reproduce the problem?
1. Run NetbookInstaller
2. Ensure Enable RemoteCD is checked
3. Install

What is the expected output? What do you see instead?
RemoteCD should be enabled for the running (or every) user.

-- This does not work because remote cd is a preference option for each user. 
The easiest fix for 
this is to edit each /Users/ directory and enable RemoteCD there. 
Unfortunately, this cannot be 
done from the install dvd + NetbookInstallerCLI as users have not been created 
yet.

What steps will reproduce the problem?
1.
2.
3.

What netbook are you using this on?


What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?


Please provide any additional information below.

What steps will reproduce the problem?
1. Install NetbookBootMaker as noted in the wiki
2.
3.

What netbook are you using this on?
HP Mini 1000(1035NR)


What is the expected output? What do you see instead?
Kexts for sound and sleep should work.   
There are work arounds where a user needs to add VoodooHDA.kext and remove
AppleHDA for sound to work.
There is no work around for sleep not working

What version of the product are you using? On what operating system?
Snow Leopard 6.0 Install Media
NetbookBootMaker 0.8.2

Please provide any additional information below.

What steps will reproduce the problem?
1. Restore Snow Leopard Retail DVD (Upgrade Disc) to 8GB USB Drive/Stick
2. Patch the restored stick using NetbookBootmaker .8.2
3. Start the MacOSX Installer and try to install the OS on a GUID 
partition table with sufficient free space (MacOS Journaled)

What netbook are you using this on?
Asus EeePC 1000HE (reported similarities on 901, 1005 and 1008 as well)

What is the expected output? What do you see instead?
Installation Completed with green arrow, restart button.

The Mac OS Installer log write something like "latest_dsdl.aml found", 
then another line "replaced". an endless loop. Installation stops at "10-9 
minutes left"

What version of the product are you using? On what operating system?
Using netbookbootmaker .8.2 on a OSX Snow Leopard mac.

Please provide any additional information below.
N/A

What steps will reproduce the problem?
1. run NetbookInstaller.
2. Enable Quiet Boot.
3. restart.

What netbook are you using this on?
dell mini 9, runcore ssd.

What is the expected output? What do you see instead?
The portion of the boot that allows startup options to be entered should be 
minimized, but it's 
just as long as when quiet boot is disabled.

What version of the product are you using? On what operating system?
Netbook Installer 0.8.2 (alpha), os 10.6.1.

Please provide any additional information below.
Yes, this is only a cosmetic flaw. Skip if it's difficult to fix.

What steps will reproduce the problem?
1. use the trackpad to put the cursor over an icon/window/menu etc.
2. Tap.

What netbook are you using this on?
Mini 10v

What is the expected output? What do you see instead?
Tap or double-tap should click or double click.

What version of the product are you using? On what operating system?
RC4 10.5.8

Please provide any additional information below.
At first I thought the trackpad wasn't registering the taps, then it seemed
that the drivers are expecting the tap to come in exactly the same location
that you stopped your finger while moving the cursor, but it just seems tap
to click is unreliable and it sometimes takes two or three taps before it
will register regardless of the method I use. I haven't come up with 100%
reliable steps to reproduce this behavior, but I have a habit of moving the
cursor, lifting my finger and then tapping in a place that isn't exactly
the same, but relatively close to the position from which it was first
lifted. The drivers don't seem to register this more often than not
(perhaps the driver thinks I'm continuing the drag?).

What steps will reproduce the problem?
1. Install Snow Leopard
2. Check Battery Status in Menu Bar by clicking on it.
3. You'll see "Service Battery" with an "!" in a warning Triangle.

What netbook are you using this on? Mini 9 With two gigs of Ram and stock 16gb 
SSD.


What is the expected output? Regular Battery Stats. What do you see instead? 
Regular Battery 
Stats Plus "Service Battery" warning.


What version of the product are you using? .8.2 alpha
On what operating system? 10.6.1 Snow Leopard.

What steps will reproduce the problem?
1. Installing on Acer AOD-150
2. First boot, video loads, and then reboot

What netbook are you using this on?
Acer AOD-150

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?
Latest 8.2 for Snow Leopard.

Please provide any additional information below.
I thought 80211 or ATA kexts might be to blame so I removed them, but same
issue.  Will now do a manual install from another drive.

What steps will reproduce the problem?
1.Netbook installer 0.8.2 latest on running 10.6 system , select running 
partition, all defaults
2.when installer is running, it gets to patching the GMA 950 extensions
3.then crashes

What netbook are you using this on?
Mini 10v, 1GB, 160GB SATA

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?


Please provide any additional information below.

The output from the crash reporter is attached

What steps will reproduce the problem?
1. use netbookbootinstaller 0.8.2 RC to install 10.5.6 retail
2. update to 10.5.7
3. install netbook installer, select install s10 drivers

What is the expected output? What do you see instead?
Should have sound, keyboard volume control. 
Neither sound nor volume control work. Onscreen display appears, but shows mute 
icon and full 
volume bars. 

What version of the product are you using? On what operating system?
0.8.2 RC boot installer and netbook installer on 10.5.6 retail updated to 
10.5.7. 

Please provide any additional information below.
Was able to get sound working by installing developer tools and Audiee. Output 
works with both 
speakers and headphone port, but need to switch via software. No input devices 
found. 

eeepc 901 or 1000h has a large market share in netbook.
It's reported that netbook-installer indeed support eeepc.
Can it be officially supported by the author?

What steps will reproduce the problem?
1. Mirror Monitors / Monitore Synchronisieren

What netbook are you using this on?
dell mini 9 

What is the expected output? What do you see instead?
colorful barcode on both monitors / Farbenfroher Strichcode auf beiden Monitoren

What version of the product are you using? On what operating system?
SL 10.6

Please provide any additional information below.
Using an extra monitor works expect the mirroring. / Verwendung eines externen 
Monitors 
funktioniert, nur das spiegeln nicht.
Delete the WindowServer file if you already have activated the mirroring.  / 
Zum Zuruecksetzen 
die WindowServer-Datei loeschen

What steps will reproduce the problem?
1. Put mini 9 into sleep mode
2. Wake the computer up
3. Try to restart computer (Apple -> Restart)

What netbook are you using this on?
Mini 9

What is the expected output? What do you see instead?
Mini 9 should restart however just hangs requiring a hard reboot

What version of the product are you using? On what operating system?
NBI 0.8.2.  10.5.8

Please provide any additional information below.
Reboot works right after a fresh reboot before using sleep. 

What steps will reproduce the problem?
1. Installed from retail OSX Leopard 10.5.6 
2. Used .8.2 alpha (from here) to patch USB successfully
3. Got kernel panic upon booting with patched USB

What netbook are you using this on?
HP Mini 110-1033CL, 2GB RAM, 160GB HDD, N270

What is the expected output? What do you see instead?
Kernel Panic - "No HPETs available..."

What version of the product are you using? On what operating system?
.8.2 alpha on 10.5.6


Please provide any additional information below.
affected file is AppleIntelCPUPowerManagement

What steps will reproduce the problem?
1. Clean Install 10.6 and Update to 10.6.1, using latest NetbookMaker
2. Start using the system
3.When Using slows with time, I probe with the dell mini 9 with 2gb memory and 
16GB FACTORY 
ssd

What netbook are you using this on?

DELL MINI 9

What is the expected output? What do you see instead?

i PROBE WITH XBench,    
And found that the system becomes slowly over time

What version of the product are you using? On what operating system?
Mac OSX 10.6.1 Retail

Please provide any additional information below.

I found a solution, please see that information

http://translate.google.com/translate?js=y&prev=_t&hl=es&ie=UTF-
8&u=http%3A%2F%2Fwww.osx86.es%2F%3Fp%3D563&sl=es&tl=en&history_state0=

its more snappier!!! and dont have that problem, i follow that solution

Thanks!!

What steps will reproduce the problem?
1. Tell OS to sleep
2.
3.

What is the expected output? What do you see instead?
Machine should go to sleep, however instead the screen blanks, then turns on 
and resumes as if 
nothing happened.

-- This has been fixed and code will be committed to svn soon.

What steps will reproduce the problem?
1. Sleep
2. Wakeup
3. Observe beach ball

What netbook are you using this on?
Mini 9

What is the expected output? What do you see instead?
Full access to OS.

What version of the product are you using? On what operating system?
0.8.2, 10.6.0

Please provide any additional information below.

What steps will reproduce the problem?
1. Fresh install of 10.6 (MBR)
2.
3.

What netbook are you using this on? 10V


What is the expected output? What do you see instead? Unexpected problem has 
caused Netbook 
Installer to quit.


What version of the product are you using? On what operating system? OSX 10.6


Please provide any additional information below.

See attached file for error report

What steps will reproduce the problem?
1. Run Netbook Installer
2. Select Bluetooth Fix


What netbook are you using this on?
Dell Mini 10v

What is the expected output? What do you see instead?
Bluetooth off/on working. Instead, I see the
"bluetooth on" greyed out. 

What version of the product are you using? On what operating system?
8.2RC4 on 10.5.8

Please provide any additional information below.

What steps will reproduce the problem?
1. Install 10.5.6 into Seagate Free Agent Go 320GB USB
2. Install Combo Update 10.5.8 successfully
3. Boot using -x and apply Netbookinstaller and the application crash

What netbook are you using this on?
Dell Mini 9, 1GB RAM, 16GB SDHC, 8GB SSD

What is the expected output? What do you see instead?
Netbookinstaller quit unexpectedly

What version of the product are you using? On what operating system?
8.0.2 RC4. OSX 10.5.6

Please provide any additional information below.

What steps will reproduce the problem?

No problem. Requesting SpeedStepping functionality. 

What netbook are you using this on?

Dell Mini 10v

What is the expected output? What do you see instead?

No expectation. Feature Request. 

Would like speedstepping, no speedstepping currently. 

What version of the product are you using? On what operating system?

OSX 10.5.8 - OSX 10.6 (NBM/NBI .8.2(alpha)

Please provide any additional information below.

SpeedStepping allows for optimal performance/power balancing. This helps
with battery life and heat. This adjusts the operating voltage and
frequency of the CPU to meet the current application requirements. 

What steps will reproduce the problem?
1.try to restart system
2.
3.

What netbook are you using this on?
dell mini 10v

What is the expected output? What do you see instead?
must restart, instead stuck on blue screen

What version of the product are you using? On what operating system?
bios 005, snow leopard 6.0 and 6.1

Please provide any additional information below.
sound after sleep also a problem

What steps will reproduce the problem?
1. Run netbook installer on Dell Mini 10v
2. Select "Install General Extensions"

What is the expected output? What do you see instead?
The install succeeds. The new touchpad drivers are
installed. However, "click-drag" still causes the cursor
to jump all over the place. As best as I can tell, this seems
to affect about half the people on the Dell Mini 10v. The other
half it seems to work for. Maybe there's a slightly different
revision of the Synaptics hardware in some Mini 10v's?

What version of the product are you using? On what operating system?
0.8.2RC2 - MacOSX 10.5.8

What steps will reproduce the problem?
1.After install of SL Bios gets rest so
2.I reboot, change bios then the Mac grey screen pops up and stays there
until I hold the power button down.  Only way I can get in is if i boot
with -x or change BIOS settings back (aka disable bluetooth, enable the
other 2)
3.sleep does not also work but you know that

What netbook are you using this on?
Mini 10v -2GB RAM - 16GB stock samsung SSD

What is the expected output? What do you see instead?
Boot into SL- mac screen freezes

What version of the product are you using? On what operating system?
Latest netbook installer- snow leopard.  Did and upgrade from 10.5.8 and it
happened so I fresh installed it.  same problem

Please provide any additional information below.

What steps will reproduce the problem?
1.
2.
3.

What netbook are you using this on? Mini 9  64gb stec  2gb ram


What is the expected output? What do you see instead?It begins to show 2
desktop windows then locks. Click red dot on the window in front and Time
Machine closed and OS goes normal


What version of the product are you using? On what operating system?8.2 alpha


Please provide any additional information below.Using external usb drive
for backup. 

What steps will reproduce the problem?
1. Installed from retail OS X Snow Leopard full
2. Used .8.2 alpha (from here) to patch USB successfully
3. Got kernel panic upon booting with patched USB

What netbook are you using this on?

Dell mini 9, 16 GB flash, 1 GB memory

What is the expected output? What do you see instead?

Kernel panic. "Unsupported CPU family = 0x6, model = 0x1c

What version of the product are you using? On what operating system?

.8.2 alpha on 10.4

Please provide any additional information below.

I followed all instructions from new thread and received this error.

What steps will reproduce the problem?
1. Run netbook installer on Dell Mini 10v
2. *Don't select* "Install [xxxxxxx] Bootloader"

What is the expected output? What do you see instead?
I expect that the bootloader will not be installed. Instead,
the bootloader is installed

What version of the product are you using? On what operating system?
0.8.2RC2 - MacOSX 10.5.8

What steps will reproduce the problem?
1.No ehternet available in system preferences.  During boot, the lights on the 
ethernet port (link 
and activity) both go out as soon as the grey apple screen appears.

What netbook are you using this on?
Dell Vostro A90, 2GB RAM, 32GB Runcore, Firmware A04.

What is the expected output? What do you see instead?
Etherent should be available. Network preferences reports as the cable is 
disconnected.  If I 
remove the interface and try to re-add it, there is no ethernet listed.

What version of the product are you using? On what operating system?
Used NetbookBootMaker 0.8.2 for Snow Leopard.  Firmware A04

Please provide any additional information below.
The Etherent had been working fine on 10.5.8 with DellEFI 1.2.  I created my 
USB boot Drive, ran 
NetbookBootMaker on it.  These operations were done on a MacBook Pro running 
Snow Leopard.  
Install on the Dell proceeded fine.  Upon reboot I repaired permissions.  

What steps will reproduce the problem?
1. Sleep system and wake
2.
3.

What netbook are you using this on?
Mini 10v

What is the expected output? What do you see instead?
working audio after sleep, volume controls appear to be working, but there is 
no audio

What version of the product are you using? On what operating system?
10.6


Please provide any additional information below.

What netbook are you using this on?

Dell Mini 9 (bios Version A05)

What is the expected output? What do you see instead?

No Bluetooth device with 10.6, even though bluetooth is enabled in the bios

What version of the product are you using? On what operating system?

8.2 Final . . . running 10.6 (everything works really well apart from the 
obvious lack of sound and 
sleep & bluetooth)

Please provide any additional information below.

No bluetooth . . . . I have run the 8.2 netbook installer (with the fix 
bluetooth option flagged) still 
no joy
I must say though how impressed I am with your efforts . . . great job

What steps will reproduce the problem?
1. Delete sleep file manually or use NetbookInstaller
2. Brief error is displayed at boot re: "NULL" hibernation restore file
3. File is recreated at end of boot.

What netbook are you using this on?
Mini 9

What is the expected output? What do you see instead?
No sleep file / we get one!

What version of the product are you using? On what operating system?
0.8.2, Snow Leopard.

Please provide any additional information below.

What steps will reproduce the problem?
1. Plug USB drive with SL image restored 
2. run NBI
3. Dropdown the disk drive to select where to install to

What netbook are you using this on? (aimed at HP mini)


What is the expected output? What do you see instead? External USB partition to 
appear in 
dropdown


What version of the product are you using? On what operating system?
Macpro 10.6.1
Ext USB 10.6 from original Retail DVD

Please provide any additional information below.

What steps will reproduce the problem?
1.launch updateExtra
2.reboot
3.kernel panic due to missing nullcpupowermanagement

What netbook are you using this on?
mini10V

What is the expected output? What do you see instead?
Installed fakesmcV2.kext (swapping with old one in /extra/mini10vext) then
run UpdateExtra. At reboot got straight a kp due to
nullcpupowermanagement.kext not included or for some reason not being
loaded in /E/Extensions.mkext
permission repair done still the same....

What version of the product are you using? On what operating system?
0.8.2, 10.6.1

Looks like a bug or something; using kextcache (ran it from install
terminal) command allow me to boot back (the extensions.mkext is only 2Mb
at this point) but with bad graphics, no airport...due to missing kext
dependencies. 
Fortunatly I had a backup of my extra folder.
So basically what commands are run by updateExtra?

What steps will reproduce the problem?
1. Do somethign to break app (run CLI as user, mkdir /Volumes/ramdisk, etc)
2. Run app
3. Watch as it silently finishes, but doesn't work

What is the expected output? What do you see instead?
NetbookInstaller shoulr report to the user of error that will cause the 
installer to function 
improperly
NetbookInstaller should *also* try to fix any errors it encounters.

Please use labels and text to provide additional information.
-- This is a required feature for the 0.9.x (beta) releases.

What steps will reproduce the problem?
1.Used NBI .83 and reinstalled Extensions and regenerated dsdt,aml 

What netbook are you using this on?
Mini 9

What is the expected output? What do you see instead?
It worked with the last release. Now, it doesn't work at all

What version of the product are you using? On what operating system?
.83

Please provide any additional information below.