opendsh / openauto Goto Github PK

Hi,

Natively building on a Raspberry Pi3, I am met with the below error after executing this:

cmake -DCMAKE_BUILD_TYPE=Release -DRPI3_BUILD=TRUE -DAASDK_INCLUDE_DIRS="~/aasdk/include" -DAASDK_LIBRARIES="~/aasdk/lib/libaasdk.so" -DAASDK_PROTO_INCLUDE_DIRS="~/aasdk_build" -DAASDK_PROTO_LIBRARIES="~/aasdk/lib/libaasdk_proto.so" ~/openauto

CMake Error at cmake_modules/Findaasdk.cmake:36 (message):
  aasdk was found but not built.  Perform an in-source build.
Call Stack (most recent call first):
  CMakeLists.txt:47 (find_package)

aasdk has already been successfully built on the machine (which is what I've done to offer openDsh/aasdk#7), but for some reason OpenDsh/openauto is failing to find the built aasdk objects.

Was working on supplying some build instructions for openauto too! Interestingly, https://github.com/rsjudka/intelligent-auto is building just fine.

The display is delayed by about 10 seconds, as if you are not using OMX, and there are 2 black bars on the side of the screen as well. I tried -DRPI_BUILD and -DRPI3_BUILD

AASDK and the pro version of OpenAuto support using the car's GPS sensor over the phone's to provide more accurate GPS signal to the phone while in the vehicle. Is it possible to have it added to this fork of OpenAuto? I have a device that will send NMEA over TCP although I can use a pty port if you just want to support serial.

Thank you!
Nat

Option in the rpi.sh to autostart at boot

the following are required on a debian system:
sudo apt-get install qttools5-dev-tools qtmultimedia5-dev qtconnectivity5-dev qtdeclarative5-dev librtaudio-dev

Dash will freeze and eventually crash when using a key mapped to the cycle page action. Tested with enter and Z key by myself and another user.