This project is the teensy code for Will Yager's custom mechanical keyboard project.

The code serves two functions:

1. If plugged into USB, the device will act as a stand-alone keyboard with 33 keys. ("The master")
2. If a second device is plugged into that first device, the two devices will share relevant information over I2C. In this way, two of these devices can be connected to form a 66-key keyboard. With some modification to the firmware and the I2C pull-up resistors, one could theoretically chain up to 129 boards together (I believe).

1. Install avr-gcc.
2. Install Teensy loader.
3. cd src
4. make
5. Drag main.hex into Teensy loader.
6. Program Teensy.

1. Modify keys[] in KeyMapper.cpp.
2. Replace values like KEY_A with other values from keylayouts.h.

This should be fairly simple to figure out. Within the file, I have keys[] laid out just like the physical keys.

       Start USB/I2C
       Determine master/slave status
       
       forever:
              led_status
              => get hardware state from HardwareController
              => debounce buttons with ButtonDebouncer
              => detect changes in buttons with ButtonDeltaDetector
              => map button changes to key changes with KeyMapper
              =: key_changes

              led_status
              => update the slave (if it exists) with the SlaveNotifier
              =: slave_key_changes

              key_changes, slave_key_changes
              => notify the master (over USB or I2C) of key changes with the MasterNotifier
              =: led_status