Configure pre-set positions and switch between them using hotbar slots.
0:
x: -156.0
y: 75.0
z: 30.0
pitch: 10.0
yaw: -80.0
Hotbar slots are saved in index format. this means they start at 0
and count to 8
.
/cam
/cam on
- Enter cam mode. Only one user should be in cam mode at a time.
/cam off
- Exit cam mode
/cam zoom <amount>
- Set a zoom level! Set between -5 and 5! Positive numbers zoom in, negative numbers zoom out. (tbh this command doesn't work super well)
Control your camera position by selecting a hotbar slot! If your camera operator has an RGB keyboard or Streamdeck, they might find it helpful to assign custom colors or icons to specific slots.