The purpose of this repository is to provide low-torque and low-impact trajectories for Mini-Pupper quadrupedal robot.

• Pinocchio
• robotoc
• meshcat-python

First, install Pinocchio by following the instruction. Next, install robotoc at ROBOTOC_INSTALL_DIR as

git clone https://github.com/mayataka/robotoc & cd robotoc
mkdir build & cd build
cmake .. -DCMAKE_BUILD_TYPE=Release -DOPTIMIZE_FOR_NATIVE=ON -DCMAKE_INSTALL_PREFIX=ROBOTOC_INSTALL_DIR
make install -j4

and modify Python path as

export PYTHONPATH=ROBOTOC_INSTALL_DIR/lib/python3.8/site-packages:$PYTHONPATH 

e.g., write it in ~/.bashrc. Finally, install meshcat-python as

pip install meshcat

In mini_pupper_trajopt directory, you can run the mini-pupper's gait optimization, e.g., via python3 troting.py. Then the log file is generated at mini_pupper_trajopt/rsc, e.g., mini_pupper_trajopt/rsc/trotting/q.log.

Note: this step is totally independent of ROS and Gazebo.

After generating the log file of the optimized trajectory, you can install the log file via catkin_make in your workspace. That is, catkin_make command also installs mini_pupper_trajopt/rsc/trotting/q.log. You can then run a Gazebo simulation as roslaunch mini_pupper_gazebo mini_pupper_trotting.launch.

Remark: This simulation is different from the trajectory optimizer because the servo motors are assumed to have only the position interface. This is much closer to the real mini-pupper robot than the trajectory optimizer in which the torque interface is assumed.

1. Install Pinocchio, robotoc, and meshcat-python.
2. Run python3 trotting.py at mini_pupper_trajopt directory.
3. Run catkin_make at ROS workspace. This command also installs generated trajectory files, e.g., mini_pupper_trajopt/rsc/trotting/q.log.
4. Launch Gazebo simulation as roslaunch mini_pupper_gazebo mini_pupper_trotting.launch