nicoretti / ka3005p Goto Github PK

If there was an interactive mode, one could pipe a config file or maybe even a sequence into the tool. This way one could run a voltage ramp or similar. Something like this:

beep off ; disable beep
voltage 10 10 ; set voltage to 10.10V
ovp on
ocp on
power on

or for the ramp:

voltage 10 00
wait 1.0 ; wait 1 sec
voltage 11 00
wait 1.0
voltage 12 00
...

(maybe the comment syntax could be included as well)

EOF and Ctrl-D or Ctrl-C could be used to exit the interactive mode

see #7 (comment)

Right now there is an additional zero.

Other power supplies might use a different usb chip manufacturer and therefore may have different id's. Therefore the possibility for overriding the usb ids for the detection of the power supply should be added.

• Add picture of power supply
• Maybe add gif which shows cli and power supply
• generate rust docs and improve rust docs

Right now:

ka30000 voltage 10 12

after:

ka30000 voltage 10.12

The k3005p supports 4 or 5 memory spots depending on the version, make sure the user can't supply an invalid id

• Add anyhow for application code
• Add thiserror and custom errors to library

• run all build
• run unit tests
• add release builds on tag push
• add code coverage
• generate documentation

Verifiy that all flags are match the ones documented in the ka3005p documentation