Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-H2 | ESP32-S3 |
---|
This example is to test the Bluetooth compatibility and mobile phones.
Before project configuration and build, be sure to set the correct chip target using:
idf.py set-target <chip_name>
- ESP32 Module: ESP32-WROOM-32x
- IDF version: 7c29a39d6f9f2dfbefc49d34d34e9267afc7200d
- Test case
- Test APK: LightBlue V1.1.3
- Test report
- A development board with ESP32/ESP32-C3/ESP32-C2/ESP32-H2/ESP32-S3 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
- A USB cable for Power supply and programming
See Development Boards for more information about it.
Run idf.py -p PORT flash monitor
to build, flash and monitor the project.
(To exit the serial monitor, type Ctrl-]
.)
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
For any technical queries, please open an issue on GitHub. We will get back to you soon.