| Status | Patch | Diffstat Summary | Files patched | Author / Subject |
|---|---|---|---|---|
| 🤖 ✅ | [kernel-drivers/] sha1_b2c9bf06474ea12eaca7d5f007e9280e057e960b_sunxi64_current_6b4abbc6_0b3d8cbf-01ba4719 |
(+0/-0)[] |
fe4cec056b5d964f786808abbe22875546e53e10 ? |
Armbian Autopatcher [AUTOGEN] /armbian/cache/patch/kernel-drivers/sha1_b2c9bf06474ea12eaca7d5f007e9280e057e960b_sunxi64_current_6b4abbc6_0b3d8cbf-01ba4719 |
| 📜 ✅ | [patches.megous/] mailbox-Allow-to-run-mailbox-while-timekeeping-is-suspended |
(+24/-4)[1M] |
05c8c336bb88a5a1f6f409cf26df7b58eb81c2e3 mailbox.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= mailbox: Allow to run mailbox while timekeeping is suspended |
| 📜 ✅ | [patches.megous/] ARM-sunxi-Add-experimental-suspend-to-memory-implementation-for |
(+46/-0)[1M] |
2c5245bb67d04a3b2e998e5b605af4f6f9e16a79 sunxi.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: sunxi: Add experimental suspend to memory implementation for A83T |
| 📜 ✅ | [patches.megous/] ARM-sunxi-sunxi_cpu0_hotplug_support_set-is-not-supported-on-A8 |
(+3/-0)[1M] |
e0d71d0a9bfb801e41b0f083cc5c64d2715d3483 mc_smp.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: sunxi: sunxi_cpu0_hotplug_support_set is not supported on A83T |
| 📜 ✅ | [patches.megous/] firmware-scpi-Add-support-for-sending-a-SCPI_CMD_SET_SYS_PWR_ST |
(+11/-0)[2M] |
41db2d7b4a6d9e8c995e47653ca121eee8ca0a44 arm_scpi.c, scpi_protocol.h |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= firmware: scpi: Add support for sending a SCPI_CMD_SET_SYS_PWR_STATE msg |
| 📜 ✅ | [patches.megous/] ARM-sunxi-Use-SCPI-to-send-suspend-message-to-SCP-on-A83T |
(+13/-2)[1M] |
b7aac579f1e2621fdec8cce1defe2df521cc9ee9 sunxi.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: sunxi: Use SCPI to send suspend message to SCP on A83T |
| 📜 ✅ | [patches.megous/] gnss-ubx-Send-soft-powerdown-message-on-suspend |
(+35/-0)[1M] |
9bc5f01128fd67fff2c403539ff27ac4ef2c8164 ubx.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= gnss: ubx: Send soft powerdown message on suspend |
| 📜 ✅ | [patches.megous/] dt-bindings-vendor-prefix-add-prefix-for-Voltafield |
(+2/-0)[1M] |
f27ac6dedfd26b30e78948631e8cab94c351e86a vendor-prefixes.yaml |
Ondrej Jirman dt-bindings: vendor-prefix: add prefix for Voltafield |
| 📜 ✅ | [patches.megous/] dt-bindings-iio-magnetometer-add-DT-binding-for-Voltafield-AF81 |
(+59/-0)[1A] |
a9dd35686199dc869f8b4221561527ec1f008c37 voltafield,af8133j.yaml |
Icenowy Zheng dt-bindings: iio: magnetometer: add DT binding for Voltafield AF8133J |
| 📜 ✅ | [patches.megous/] MAINTAINERS-add-an-entry-for-AF8133J-driver |
(+6/-0)[1M] |
1461fca9f5e028d27f5a4766c5dac70ea5960772 MAINTAINERS |
Icenowy Zheng MAINTAINERS: add an entry for AF8133J driver |
| 📜 ✅ | [patches.megous/] iio-magnetometer-add-a-driver-for-Voltafield-AF8133J-magnetomet |
(+364/-0)[2M, 1A] |
e1aacb31d763416e535dd7d4431f37dd5f9e452d af8133j.c, Kconfig, Makefile |
Icenowy Zheng iio: magnetometer: add a driver for Voltafield AF8133J magnetometer |
| 📜 ✅ | [patches.megous/] iio-af8133j-Cleanup-probe-and-power-up-down |
(+73/-92)[1M] |
a941e1fc7c6d7d4102e7129c503e035eee46ee0b af8133j.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= iio: af8133j: Cleanup probe and power up/down |
| 📜 ✅ | [patches.megous/] iio-af8133j-Add-runtime-power-management |
(+81/-19)[1M] |
e74f164caf2e9b8062dbb632f30bab61d49bd07c af8133j.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= iio: af8133j: Add runtime power management |
| 📜 ✅ | [patches.megous/] iio-af8133j-Add-support-for-buffer |
(+37/-2)[1M] |
8a84e3d3da093ad956153aac82c80af3fa7a314f af8133j.c |
Ondrej Jirman iio: af8133j: Add support for buffer |
| 📜 ✅ | [patches.megous/] iio-af8133j-Avoid-compiler-warning |
(+1/-1)[1M] |
a0246e52960becbd3f624cd2a1ddf915899f6509 af8133j.c |
Ondrej Jirman iio: af8133j: Avoid compiler warning |
| 📜 ✅ | [patches.megous/] phy-allwinner-sun4i-usb-Add-support-for-usb_role_switch |
(+51/-1)[2M] |
2656a86267a7952641362c89b60315f0406c687b phy-sun4i-usb.c, Kconfig |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= phy: allwinner: sun4i-usb: Add support for usb_role_switch |
| 📜 ✅ | [patches.megous/] regulator-axp20x-Add-support-for-vin-supply-for-drivevbus |
(+27/-3)[1M] |
e92d0d70daca529ee1d92b5c2c83eec2cf972462 axp20x-regulator.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= regulator: axp20x: Add support for vin-supply for drivevbus |
| 📜 ✅ | [patches.megous/] regulator-axp20x-Turn-N_VBUSEN-to-input-on-x-powers-sense-vbus- |
(+12/-0)[2M] |
e68f8671b627e744717342245e2c025f9606797b axp20x-regulator.c, sun50i-a64-pinephone-1.2.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= regulator: axp20x: Turn N_VBUSEN to input on x-powers,sense-vbus-en |
| 📜 ✅ | [patches.megous/] drm-bridge-dw-hdmi-Allow-to-accept-HPD-status-from-other-driver |
(+59/-4)[1M] |
c55385c5815283548c80908c764ea762fdd309bd dw-hdmi.c |
Ondrej Jirman drm: bridge: dw-hdmi: Allow to accept HPD status from other drivers |
| 📜 ✅ | [patches.megous/] drm-bridge-dw-hdmi-Report-HDMI-hotplug-events |
(+8/-2)[1M] |
bae33182a38e5bbde108418ccbee401ff74e9645 dw-hdmi.c |
Ondrej Jirman drm: bridge: dw-hdmi: Report HDMI hotplug events |
| 📜 ✅ | [patches.megous/] usb-typec-anx7688-Add-driver-for-ANX7688-USB-C-HDMI-bridge |
(+2253/-0)[2M, 1A] |
54d6b91bb1a671ee2cd2cf4a7cca110462250ca5 anx7688.c, Kconfig, Makefile |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= usb: typec: anx7688: Add driver for ANX7688 USB-C HDMI bridge |
| 📜 ✅ | [patches.megous/] usb-typec-anx7688-Don-t-use-I2C-regulator |
(+3/-1)[1M] |
b573291bb5d0a2f4bde88a6cad7ee7c9d34640a3 anx7688.c |
Ondrej Jirman usb: typec: anx7688: Don't use I2C regulator |
| 📜 ✅ | [patches.megous/] usb-typec-anx7688-I2C-bus-power-needs-to-be-enabled |
(+6/-11)[1M] |
e9733b8d6b6fdfe69c8b3079629da48e7e9ab151 anx7688.c |
Ondrej Jirman usb: typec: anx7688: I2C bus power needs to be enabled |
| 📜 ✅ | [patches.megous/] ASOC-sun9i-hdmi-audio-Initial-implementation |
(+189/-0)[2M, 1A] |
bf583942e110f0b538aad5218a785f1b524c4a0a sun9i-hdmi-audio.c, Kconfig, Makefile |
Jernej Skrabec ASOC: sun9i-hdmi-audio: Initial implementation |
| 📜 ✅ | [patches.megous/] ARM-dts-sunxi-h3-h5-Add-hdmi-sound-card |
(+15/-0)[1M] |
3ab29d4018324e2d2a6aa1267f73a1970f392ad6 sunxi-h3-h5.dtsi |
Jernej Skrabec ARM: dts: sunxi: h3/h5: Add hdmi sound card |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-h3-Enable-hdmi-sound-card-on-boards-with-hdmi |
(+80/-0)[10M] |
d0400d854f48cb284076a6b4da745a4b7d122d0c sun8i-h3-beelink-x2.dts, sun8i-h3-emlid-neutis-n5h3-devboard.dts, sun8i-h3-nanopi-m1-plus.dts, sun8i-h3-nanopi-m1.dts, sun8i-h3-orangepi-2.dts, sun8i-h3-orangepi-lite.dts, sun8i-h3-orangepi-one.dts, sun8i-h3-orangepi-pc.dts, sun8i-h3-orangepi-zero-plus2.dts, sun8i-h3-rervision-dvk.dts |
Jernej Skrabec ARM: dts: sun8i: h3: Enable hdmi sound card on boards with hdmi |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-h2-plus-bananapi-m2-zero-Enable-HDMI-audio |
(+8/-0)[1M] |
212383a4a08210edbe06b991b4aa55f5e0d4616e sun8i-h2-plus-bananapi-m2-zero.dts |
Jernej Skrabec ARM: dts: sun8i: h2-plus: bananapi-m2-zero: Enable HDMI audio |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-a83t-Add-hdmi-sound-card |
(+15/-0)[1M] |
f6453b020ad6c7d87d86766bc1b119ccd2e77ba8 sun8i-a83t.dtsi |
Jernej Skrabec ARM: dts: sun8i: a83t: Add hdmi sound card |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-a83t-Enable-hdmi-sound-card-on-boards-with-hdmi |
(+16/-0)[2M] |
d76109391b26abfee752c0f54bd50a5510d2075d sun8i-a83t-bananapi-m3.dts, sun8i-a83t-cubietruck-plus.dts |
Jernej Skrabec ARM: dts: sun8i: a83t: Enable hdmi sound card on boards with hdmi |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-r40-Add-hdmi-sound-card |
(+15/-0)[1M] |
cac46483900ea3e2b63c2b011981187d9955e230 sun8i-r40.dtsi |
Jernej Skrabec ARM: dts: sun8i: r40: Add hdmi sound card |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-r40-bananapi-m2-ultra-Enable-HDMI-audio |
(+8/-0)[1M] |
c57fe4cfda7c4b9e637079bda96fb8b0c9fe154e sun8i-r40-bananapi-m2-ultra.dts |
Jernej Skrabec ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable HDMI audio |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-v40-bananapi-m2-berry-Enable-HDMI-audio |
(+8/-0)[1M] |
82796526e5dd03f2fb2c7087a2006ed77b352cf7 sun8i-v40-bananapi-m2-berry.dts |
Jernej Skrabec ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI audio |
| 📜 ✅ | [patches.megous/] arm64-dts-allwinner-h6-Add-hdmi-sound-card |
(+16/-0)[1M] |
b3704f51542e7dc485cc34916afbef4dcef9de7d sun50i-h6.dtsi |
Jernej Skrabec arm64: dts: allwinner: h6: Add hdmi sound card |
| 📜 ✅ | [patches.megous/] arm64-dts-allwinner-h6-Enable-hdmi-sound-card-on-boards-with-hd |
(+32/-0)[4M] |
9dc64e033c851ac141eb344a7e063ffac6b57ea4 sun50i-h6-beelink-gs1.dts, sun50i-h6-orangepi-3.dts, sun50i-h6-orangepi.dtsi, sun50i-h6-pine-h64.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: allwinner: h6: Enable hdmi sound card on boards with hdmi |
| 📜 ✅ | [patches.megous/] arm64-dts-allwinner-a64-Add-hdmi-sound-card |
(+15/-0)[1M] |
0b4e667c3a63eea0cd60cd80ae4b4f275a6dc4f9 sun50i-a64.dtsi |
Jernej Skrabec arm64: dts: allwinner: a64: Add hdmi sound card |
| 📜 ✅ | [patches.megous/] arm64-dts-allwinner-a64-Enable-hdmi-sound-card-on-boards-with-h |
(+55/-0)[7M] |
8178994135357fd98106cc759e9160bddb0b49c4 sun50i-a64-bananapi-m64.dts, sun50i-a64-nanopi-a64.dts, sun50i-a64-orangepi-win.dts, sun50i-a64-pine64.dts, sun50i-a64-sopine-baseboard.dts, sun50i-a64-teres-i.dts, sun50i-a64-olinuxino.dts |
Jernej Skrabec arm64: dts: allwinner: a64: Enable hdmi sound card on boards with hdmi |
| 📜 ✅ | [patches.megous/] arm64-dts-allwinner-h5-Enable-hdmi-sound-card-on-boards-with-hd |
(+32/-0)[4M] |
7e2d0e9943d85435ace18da98bed0e96b2191aae sun50i-h5-emlid-neutis-n5-devboard.dts, sun50i-h5-orangepi-pc2.dts, sun50i-h5-orangepi-prime.dts, sun50i-h5-orangepi-zero-plus2.dts |
Jernej Skrabec arm64: dts: allwinner: h5: Enable hdmi sound card on boards with hdmi |
| 📜 ✅ | [patches.megous/] ASoC-sun50i-codec-analog-Add-support-for-internal-bias |
(+27/-0)[1M] |
3edcb1c6396108c9af8f513792945ab406f5afb5 sun50i-codec-analog.c |
Arnaud Ferraris ASoC: sun50i-codec-analog: Add support for internal bias |
| 📜 ✅ | [patches.megous/] ASoC-sun50i-codec-analog-Move-suspend-resume-to-set_bias_level |
(+19/-11)[1M] |
b047f933abbd9d01737d5f3043238687dbfea8c4 sun50i-codec-analog.c |
Samuel Holland ASoC: sun50i-codec-analog: Move suspend/resume to set_bias_level |
| 📜 ✅ | [patches.megous/] ASoC-sun50i-codec-analog-Enable-jack-detection-on-startup |
(+31/-1)[1M] |
ead2e7cc81a2af044f86324e62cbae61ac10241b sun50i-codec-analog.c |
Arnaud Ferraris ASoC: sun50i-codec-analog: Enable jack detection on startup |
| 📜 ✅ | [patches.megous/] ASoC-sun8i-codec-Enable-bus-clock-at-STANDBY-and-higher-bias |
(+33/-8)[1M] |
cbde139c942cea63b1353603c72163887a181656 sun8i-codec.c |
Samuel Holland ASoC: sun8i-codec: Enable bus clock at STANDBY and higher bias |
| 📜 ✅ | [patches.megous/] ASoC-sun8i-codec-Implement-jack-and-accessory-detection |
(+269/-0)[1M] |
4fc5feeefd240c238cb127b68258fafd68e60253 sun8i-codec.c |
Arnaud Ferraris ASoC: sun8i-codec: Implement jack and accessory detection |
| 📜 ✅ | [patches.megous/] ASoC-ec25-New-codec-driver-for-the-EC25-modem |
(+99/-0)[2M, 1A] |
d6cd09a5fb7dca349b67b20ccdd6bc913839eeb5 ec25.c, Kconfig, Makefile |
Samuel Holland ASoC: ec25: New codec driver for the EC25 modem |
| 📜 ✅ | [patches.megous/] clk-sunxi-ng-a64-Increase-PLL_AUDIO-base-frequency |
(+32/-9)[1M] |
4528260daee5089478b410d2ddaf9d7361ea8a5b ccu-sun50i-a64.c |
Samuel Holland clk: sunxi-ng: a64: Increase PLL_AUDIO base frequency |
| 📜 ✅ | [patches.megous/] sound-soc-sun8i-codec-Add-support-for-digital-part-of-the-AC100 |
(+218/-8)[2M] |
b370c6460e142e87805e02481473bbd9183aada0 sun8i-codec.c, Kconfig |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= sound: soc: sun8i-codec: Add support for digital part of the AC100 codec |
| 📜 ✅ | [patches.megous/] sound-soc-sun8i-codec-Drop-debug-statements |
(+1/-8)[1M] |
0cc2f2ea3dae054fb5c07aebdc3f05e950067c98 sun8i-codec.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= sound: soc: sun8i-codec: Drop debug statements |
| 📜 ✅ | [patches.megous/] sound-soc-ac100-codec-Support-analog-part-of-X-Powers-AC100-cod |
(+1007/-0)[4M, 1A] |
a3a261347189f7d95d822e07dbd86aec92ed5321 ac100-codec.c, Kconfig, ac100.c, ac100.h, Makefile |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= sound: soc: ac100-codec: Support analog part of X-Powers AC100 codec |
| 📜 ✅ | [patches.megous/] sound-soc-ac100-Make-sure-we-shutdown-the-audio-outputs-on-rebo |
(+11/-0)[1M] |
4bf3dbbcfe41340eade603686eaed5813ff72939 ac100-codec.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= sound: soc: ac100: Make sure we shutdown the audio outputs on reboot |
| 📜 ✅ | [patches.megous/] ASoC-sunxi-sun8i-codec-Improve-jack-button-handling-and-mic-det |
(+188/-65)[2M] |
b35cd3f6b621cb8cdb9e3bd93ffbd6b902303b1a sun8i-codec.c, sun50i-codec-analog.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ASoC: sunxi: sun8i-codec: Improve jack button handling and mic detection |
| 📜 ✅ | [patches.megous/] dt-bindings-axp20x-adc-allow-to-use-TS-pin-as-GPADC |
(+5/-0)[1M] |
13a8d837470b57d44e829638d08fa21e3d39241f x-powers,axp209-adc.yaml |
Icenowy Zheng dt-bindings: axp20x-adc: allow to use TS pin as GPADC |
| 📜 ✅ | [patches.megous/] iio-adc-axp20x_adc-allow-to-set-TS-pin-to-GPADC-mode |
(+6/-0)[1M] |
72f29f34f2e7ad7c8767958c038541e45c7bfd24 axp20x_adc.c |
Icenowy Zheng iio: adc: axp20x_adc: allow to set TS pin to GPADC mode |
| 📜 ✅ | [patches.megous/] power-axp20x_battery-Allow-to-set-target-voltage-to-4.35V |
(+5/-0)[1M] |
4a4d980b6961f3173011a37ce325769f62873f0e axp20x_battery.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= power: axp20x_battery: Allow to set target voltage to 4.35V |
| 📜 ✅ | [patches.megous/] power-supply-axp20x_battery-Add-support-for-reporting-OCV |
(+23/-0)[1M] |
7819693490c54ec19357f2d1963c600a13a75563 axp20x_battery.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= power: supply: axp20x_battery: Add support for reporting OCV |
| 📜 ✅ | [patches.megous/] regulator-axp20x-Enable-over-temperature-protection-and-16s-res |
(+7/-0)[1M] |
6e10ebccc9bb60ae1928a48afdf045bdb8f8a9f8 axp20x-regulator.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= regulator: axp20x: Enable over-temperature protection and 16s reset function |
| 📜 ✅ | [patches.megous/] power-supply-axp20x_battery-Setup-thermal-regulation-experiment |
(+54/-0)[1M] |
b780c34fd52fff13697e24e865de1e9680a82435 axp20x_battery.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= power: supply: axp20x_battery: Setup thermal regulation (experimental) |
| 📜 ✅ | [patches.megous/] power-supply-axp20x_battery-Fix-charging-done-detection |
(+3/-2)[1M] |
6e4cbeb7a6a8b76f1c4cdfa1449baec71e18177c axp20x_battery.c |
Samuel Holland power: supply: axp20x_battery: Fix charging done detection |
| 📜 ✅ | [patches.megous/] mfd-axp20x-Add-battery-IRQ-resources |
(+36/-0)[1M] |
cde8470ce569a93a4bb57b8cb442f8d546fcede5 axp20x.c |
Samuel Holland mfd: axp20x: Add battery IRQ resources |
| 📜 ✅ | [patches.megous/] power-supply-axp20x_battery-Send-uevents-for-status-changes |
(+53/-2)[1M] |
c12f475ba8825fc29f2e788f95dfff5d74e2b00c axp20x_battery.c |
Samuel Holland power: supply: axp20x_battery: Send uevents for status changes |
| 📜 ✅ | [patches.megous/] power-supply-axp20x_battery-Monitor-battery-health |
(+56/-2)[1M] |
1d14be82a0d9ec2905abafe69f8f0162d613fea5 axp20x_battery.c |
Samuel Holland power: supply: axp20x_battery: Monitor battery health |
| 📜 ✅ | [patches.megous/] power-supply-axp20x-usb-power-Change-Vbus-hold-voltage-to-4.5V |
(+12/-0)[1M] |
95310721dc8af224c48788206d2b4bae3ab0d95c axp20x_usb_power.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= power: supply: axp20x-usb-power: Change Vbus hold voltage to 4.5V |
| 📜 ✅ | [patches.megous/] power-axp803-Add-interrupts-for-low-battery-power-condition |
(+4/-0)[2M] |
96ff60861e84c700c01b73138f22a2bb72557997 axp20x.c, axp20x_battery.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= power: axp803: Add interrupts for low battery power condition |
| 📜 ✅ | [patches.megous/] power-supply-axp20x-battery-Support-POWER_SUPPLY_PROP_CHARGE_BE |
(+30/-0)[1M] |
17eb08892c623b5ca6dff27ae2e1e94b31e0b4d2 axp20x_battery.c |
Ondrej Jirman power: supply: axp20x-battery: Support POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR |
| 📜 ✅ | [patches.megous/] power-supply-axp20x-battery-Enable-poweron-by-RTC-alarm |
(+5/-0)[1M] |
044f1eda48ffb9caa5a2f57e47bcfd91d95aed29 axp20x_battery.c |
Ondrej Jirman power: supply: axp20x-battery: Enable poweron by RTC alarm |
| 📜 ✅ | [patches.megous/] power-supply-axp20x-battery-Add-support-for-POWER_SUPPLY_PROP_E |
(+16/-4)[1M] |
c1761c393630b5f7d9bdb6dc7006bce2c9358432 axp20x_battery.c |
Ondrej Jirman power: supply: axp20x-battery: Add support for POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN |
| 📜 ✅ | [patches.megous/] power-supply-Add-support-for-USB_BC_ENABLED-and-USB_DCP_INPUT_C |
(+4/-0)[2M] |
18b9774e240d7b308abe6873236909b7ea5e7c7c power_supply_sysfs.c, power_supply.h |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= power: supply: Add support for USB_BC_ENABLED and USB_DCP_INPUT_CURRENT_LIMIT |
| 📜 ✅ | [patches.megous/] power-supply-axp20x-usb-power-Support-input-current-limit-expor |
(+204/-4)[3M] |
8a92286ac97608d79740a44c04fb6daa92917c51 axp20x_usb_power.c, axp20x.c, axp20x.h |
Ondrej Jirman power: supply: axp20x-usb-power: Support input current limit, export extra props |
| 📜 ✅ | [patches.megous/] dt-bindings-media-Add-bindings-for-Himax-HM5065-camera-sensor |
(+49/-0)[1A] |
de8b5ed1dda1f1bff75c4184dd73349f98cf0647 hm5065.txt |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= dt-bindings: media: Add bindings for Himax HM5065 camera sensor |
| 📜 ✅ | [patches.megous/] hm5065-yaml-bindings-wip |
(+90/-0)[1A] |
bb5ddd7bcceb6e5c649c48ece2b17adf16e52340 hm5065.yaml |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= hm5065: yaml bindings (wip) |
📜 [needs_rebase] |
[patches.megous/] media-hm5065-Add-subdev-driver-for-Himax-HM5065-camera-sensor |
(+2216/-0)[2M, 1A] |
efb50e8da0d783723d0aa314897684a976ae23a2 hm5065.c, Kconfig, Makefile |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= media: hm5065: Add subdev driver for Himax HM5065 camera sensor |
| 📜 ✅ | [patches.megous/] MAINTAINERS-Add-entry-for-Himax-HM5065 |
(+6/-0)[1M] |
8d5df534a12d392361d73a74e81ba7222cc88a30 MAINTAINERS |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= MAINTAINERS: Add entry for Himax HM5065 |
📜 [needs_rebase] |
[patches.megous/] media-gc2145-Galaxycore-camera-module-driver |
(+2255/-0)[2M, 1A] |
bab3d1b004cd26597a19c01c5c771920ccbbb29a gc2145.c, Kconfig, Makefile |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= media: gc2145: Galaxycore camera module driver |
| 📜 ✅ | [patches.megous/] media-gc2145-Added-BGGR-bayer-mode |
(+5/-0)[1M] |
283e9c6a41fbf076940a5c55e2f957a44467ff01 gc2145.c |
Martijn Braam media: gc2145: Added BGGR bayer mode |
| 📜 ✅ | [patches.megous/] media-gc2145-Disable-debug-output |
(+2/-2)[1M] |
5a396166500a4820a8435412f267652fb49c666a gc2145.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= media: gc2145: Disable debug output |
| 📜 ✅ | [patches.megous/] media-gc2145-Add-PIXEL_RATE-HBLANK-and-VBLANK-controls |
(+264/-211)[1M] |
ae94260b485528d1af22da2e37f798b4dda33e37 gc2145.c |
Benjamin Schaaf media: gc2145: Add PIXEL_RATE, HBLANK and VBLANK controls |
| 📜 ✅ | [patches.megous/] media-ov5640-Experiment-Try-to-disable-denoising-sharpening |
(+17/-0)[1M] |
8bfb8dc4331aff0f8116dcb8362971130a53cecd ov5640.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= media: ov5640: [Experiment] Try to disable denoising/sharpening |
| 📜 ✅ | [patches.megous/] media-ov5640-Sleep-after-poweroff-to-ensure-next-poweron-is-not |
(+1/-0)[1M] |
db193b163014b3f03cc8407c1fe9cd011d38a137 ov5640.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= media: ov5640: Sleep after poweroff to ensure next poweron is not too early |
📜 ❌[invalid_diff] [needs_rebase] |
[patches.megous/] media-ov5640-Don-t-powerup-the-sensor-during-driver-probe |
(+0/-0)[] |
6548f249e9286cc96d5bad96790912a92cd83802 ? |
Ondrej Jirman media: ov5640: Don't powerup the sensor during driver probe |
📜 [needs_rebase] |
[patches.megous/] media-ov5640-set-default-ae-target-lower |
(+1/-1)[1M] |
1e19ca1ec0f1924bd8f27b2ccf268e1d43a4753b ov5640.c |
Martijn Braam media: ov5640: set default ae target lower |
📜 [needs_rebase] |
[patches.megous/] media-ov5640-Improve-error-reporting |
(+6/-2)[1M] |
2f04bcd514a3098700c85ee77604476274a21045 ov5640.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= media: ov5640: Improve error reporting |
📜 [needs_rebase] |
[patches.megous/] media-ov5640-Implement-autofocus |
(+279/-0)[1M] |
da8a3966b3a4f9ece9267ff9998315f2a63a3892 ov5640.c |
Ondrej Jirman media: ov5640: Implement autofocus |
📜 [needs_rebase] |
[patches.megous/] media-ov5640-Improve-firmware-load-time |
(+71/-26)[1M] |
fc8c86531f626a8944f225dfefdcb2bca5c28e67 ov5640.c |
Benjamin Schaaf media: ov5640: Improve firmware load time |
📜 [needs_rebase] |
[patches.megous/] media-ov5640-Fix-focus-commands-blocking-until-complete |
(+18/-49)[1M] |
452794bfd3feb3cf8d102139f6b99c12bf66ba13 ov5640.c |
Benjamin Schaaf media: ov5640: Fix focus commands blocking until complete |
📜 [needs_rebase] |
[patches.megous/] media-ov5640-Add-read-only-property-for-vblank |
(+1/-0)[1M] |
2f29606b97d20a1604eecd93d66461fc1df8f536 ov5640.c |
Adam Pigg media: ov5640: Add read-only property for vblank |
| 📜 ✅ | [patches.megous/] media-sun6i-csi-capture-Use-subdev-operation-to-access-bridge-f |
(+17/-26)[3M] |
33c599dd50d37b8aae6653dbd2d93d723053f9a9 sun6i_csi_capture.c, sun6i_csi_bridge.c, sun6i_csi_bridge.h |
Laurent Pinchart media: sun6i-csi: capture: Use subdev operation to access bridge format |
| 📜 ✅ | [patches.megous/] media-sun6i-csi-subdev-Use-subdev-active-state-to-store-active- |
(+92/-106)[2M] |
bc9b2ed680e1387b7c6c17bba8916b120478d6e3 sun6i_csi_bridge.c, sun6i_csi_bridge.h |
Laurent Pinchart media: sun6i-csi: subdev: Use subdev active state to store active format |
| 📜 ✅ | [patches.megous/] media-sun6i-csi-merge-sun6i_csi_formats-and-sun6i_csi_formats_m |
(+102/-115)[2M] |
352ec586f35e042cf39ae387b3a8cae5a9a4aac0 sun6i_csi_capture.c, sun6i_csi_capture.h |
Adam Pigg media: sun6i-csi: merge sun6i_csi_formats and sun6i_csi_formats_match |
| 📜 ✅ | [patches.megous/] media-sun6i-csi-add-V4L2_CAP_IO_MC-capability |
(+34/-3)[1M] |
20847903e68fe2bba2e1aba5f4bbf19e1a153481 sun6i_csi_capture.c |
Adam Pigg media: sun6i-csi: add V4L2_CAP_IO_MC capability |
| 📜 ✅ | [patches.megous/] media-sun6i-csi-implement-vidioc_enum_framesizes |
(+24/-0)[1M] |
fc000ba75b8db1739fd594dec50c0a216b2f0220 sun6i_csi_capture.c |
Adam Pigg media: sun6i-csi: implement vidioc_enum_framesizes |
| 📜 ✅ | [patches.megous/] media-sun6i-csi-Add-multicamera-support-for-parallel-bus |
(+33/-22)[2M] |
73d41676ec6cc80dadfe5010432f8937932a1e39 sun6i_csi_bridge.c, sun6i_csi_bridge.h |
Ondrej Jirman media: sun6i-csi: Add multicamera support for parallel bus |
| 📜 ✅ | [patches.megous/] media-gc2145-implement-system-suspend |
(+37/-0)[1M] |
56d840bd2e75d24ccc648d40e56ef7bb23ac0a04 gc2145.c |
Andrey Skvortsov media: gc2145: implement system suspend |
📜 [needs_rebase] |
[patches.megous/] media-ov5640-use-pm_runtime_force_suspend-resume-for-system-sus |
(+2/-0)[1M] |
1080e9e7781d92acd84ec87ecf79463718aaecf6 ov5640.c |
Andrey Skvortsov media: ov5640: use pm_runtime_force_suspend/resume for system suspend |
| 📜 ✅ | [patches.megous/] media-gc2145-fix-white-balance-colors |
(+97/-21)[1M] |
83a2a3fbb63c6ce60509b7f77b93e6043ff746cf gc2145.c |
Andrey Skvortsov media: gc2145: fix white-balance colors |
| 📜 ✅ | [patches.megous/] drm-sun4i-Unify-sun8i_-_layer-structs |
(+38/-48)[6M] |
5e39211f77a0352f7409ef39464806a8753046b8 sun8i_ui_layer.h, sun8i_vi_layer.h, sun8i_mixer.h, sun8i_ui_layer.c, sun8i_vi_layer.c, sun8i_mixer.c |
Ondrej Jirman drm/sun4i: Unify sun8i*layer structs |
| 📜 ✅ | [patches.megous/] drm-sun4i-Add-more-parameters-to-sunxi_engine-commit-callback |
(+18/-6)[4M] |
c699e2e8b06602b58d942829922b9386c64f87a5 sunxi_engine.h, sun8i_mixer.c, sun4i_backend.c, sun4i_crtc.c |
Ondrej Jirman drm/sun4i: Add more parameters to sunxi_engine commit callback |
| 📜 ✅ | [patches.megous/] drm-sun4i-Fix-layer-zpos-change-atomic-modesetting |
(+81/-143)[4M] |
8147842281d553d7be12a01a619e42b7bce53913 sun8i_vi_layer.c, sun8i_ui_layer.c, sun8i_mixer.c, sun8i_mixer.h |
Ondrej Jirman drm/sun4i: Fix layer zpos change/atomic modesetting |
| 📜 ✅ | [patches.megous/] drm-sun4i-Implement-gamma-correction |
(+58/-1)[3M] |
c4da38fa529c47548dbf7036f04e1b9f94b00419 sun4i_tcon.c, sun4i_crtc.c, sun4i_tcon.h |
Vasily Khoruzhick drm/sun4i: Implement gamma correction |
| 📜 ✅ | [patches.megous/] drm-panel-st7703-Improve-the-power-up-down-sequence-of-the-pane |
(+5/-5)[1M] |
5a1caee149d36b7482130867ba1c7a21e8ca998b panel-sitronix-st7703.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= drm/panel: st7703: Improve the power up/down sequence of the panel |
| 📜 ✅ | [patches.megous/] drm-panel-st7703-Fix-xbd599-timings-to-make-refresh-rate-exactl |
(+4/-4)[1M] |
2e6d1184606e6742a7c68f656d762ca7fd42be07 panel-sitronix-st7703.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= drm/panel: st7703: Fix xbd599 timings to make refresh rate exactly 60.006Hz |
📜 [needs_rebase] |
[patches.megous/] drm-sun4i-Support-taking-over-display-pipeline-state-from-p-boo |
(+167/-2)[11M] |
a1602cc69e4296cbaa00bfbf32e748e24fa511e3 sun8i_mixer.c, pwm_bl.c, sun4i_tcon.c, panel-sitronix-st7703.c, drm_fbdev_generic.c, phy-sun6i-mipi-dphy.c, sun6i_mipi_dsi.c, ccu-sun50i-a64.c, sun8i_mixer.h, sun4i_tcon.h, sun6i_mipi_dsi.h |
Ondrej Jirman drm/sun4i: Support taking over display pipeline state from p-boot |
| 📜 ✅ | [patches.megous/] video-pwm_bl-Allow-to-change-lth_brightness-via-sysfs |
(+70/-2)[1M] |
9f4717cbd1ba76cad13fce95cac52d9547a732f2 pwm_bl.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= video: pwm_bl: Allow to change lth_brightness via sysfs |
| 📜 ✅ | [patches.megous/] clk-sunxi-ng-add-support-for-rate-resetting-notifier |
(+34/-0)[2M] |
733979cff2da78e82ca34951f3124b642cf3707e ccu_common.c, ccu_common.h |
Icenowy Zheng clk: sunxi-ng: add support for rate resetting notifier |
| 📜 ✅ | [patches.megous/] clk-sunxi-ng-a64-keep-tcon0-clock-rate-when-pll-video0-s-rate-c |
(+15/-0)[1M] |
a8d165e847a8f85980517ab0cf3409d5fd89d13a ccu-sun50i-a64.c |
Icenowy Zheng clk: sunxi-ng: a64: keep tcon0 clock rate when pll-video0's rate changes |
| 📜 ✅ | [patches.megous/] drm-sun4i-tcon-hand-over-the-duty-to-keep-TCON0-clock-to-CCU-on |
(+14/-2)[2M] |
7212413448e0180195baf6dd3395119cb36ea8fa sun4i_tcon.c, sun4i_tcon.h |
Icenowy Zheng drm/sun4i: tcon: hand over the duty to keep TCON0 clock to CCU on A64 |
| 📜 ✅ | [patches.megous/] clk-sunxi-ng-sun50i-a64-Switch-parent-of-MIPI-DSI-to-periph0-1x |
(+9/-1)[1M] |
69b59153d20ae540913127efc207c61d4f9799ca ccu-sun50i-a64.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= clk: sunxi-ng: sun50i-a64: Switch parent of MIPI-DSI to periph0(1x) |
| 📜 ✅ | [patches.megous/] sunxi-Use-dev_err_probe-to-handle-EPROBE_DEFER-errors |
(+25/-12)[5M] |
1b96749d19b02a86eb3461d59b57e781b7d37d14 phy-sun4i-usb.c, i2c-gpio.c, phy-sun6i-mipi-dphy.c, topology.c, panel-sitronix-st7703.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= sunxi: Use dev_err_probe to handle EPROBE_DEFER errors |
| 📜 ✅ | [patches.megous/] thermal-sun8i-Be-loud-when-probe-fails |
(+21/-4)[1M] |
d8d4b970ee17c83f0978d1a9bfc140d0cf2e3b37 sun8i_thermal.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= thermal: sun8i: Be loud when probe fails |
| 📜 ✅ | [patches.megous/] i2c-mv64xxx-Don-t-make-a-fuss-when-pinctrl-recovery-state-is-no |
(+8/-0)[1M] |
27b36256b23ed05d4ff987566da6bf855924d91d i2c-mv64xxx.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= i2c: mv64xxx: Don't make a fuss when pinctrl recovery state is not present |
| 📜 ✅ | [patches.megous/] iio-st_sensors-Don-t-report-error-when-the-device-is-not-presen |
(+9/-1)[1M] |
1ae6ee210c07ec30a45ae30a930e8eea343c87fc st_sensors_core.c |
Ondrej Jirman iio: st_sensors: Don't report error when the device is not present on I2C bus |
| 📜 ✅ | [patches.megous/] opp-core-Avoid-confusing-error-when-no-regulator-is-defined-in- |
(+5/-0)[1M] |
302c4dba27b9e172e20d7ff52527a92edd167f0f core.c |
Ondrej Jirman opp: core: Avoid confusing error when no regulator is defined in DT |
| 📜 ✅ | [patches.megous/] media-cedrus-Fix-failure-to-clean-up-hardware-on-probe-failure |
(+3/-1)[1M] |
90daf9e8751de3cd73c3327316c19c74ff30f5f7 cedrus.c |
Samuel Holland media: cedrus: Fix failure to clean up hardware on probe failure |
| 📜 ✅ | [patches.megous/] Revert-drm-sun4i-lvds-Invert-the-LVDS-polarity |
(+3/-1)[1M] |
4df4a5700d18615f2a74c046d7dab676aa3ee727 sun4i_tcon.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= Revert "drm/sun4i: lvds: Invert the LVDS polarity" |
| 📜 ✅ | [patches.megous/] arm64-dts-allwinner-Enforce-consistent-MMC-numbering |
(+18/-0)[3M] |
45e8fa23ac9af42f26a1f21ff09a15d979cf88c4 sun50i-a64.dtsi, sun50i-h5.dtsi, sun50i-h6.dtsi |
Samuel Holland arm64: dts: allwinner: Enforce consistent MMC numbering |
| 📜 ✅ | [patches.megous/] ARM-dts-sunxi-Add-aliases-for-MMC |
(+18/-0)[3M] |
4b500cf68611e2ed0808aac13a39f5c2dc12679d sun5i.dtsi, sun8i-a83t.dtsi, sun8i-h3.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sunxi: Add aliases for MMC |
| 📜 ✅ | [patches.megous/] of-property-fw_devlink-Support-allwinner-sram-links |
(+22/-0)[1M] |
1907a7d466dc7788330f5d72c3cb0d443207d8a2 property.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= of: property: fw_devlink: Support allwinner,sram links |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-a83t-Add-missing-GPU-trip-point |
(+9/-0)[1M] |
86003cf55b19f94d8e5a74c7672f86cb0ebda6f4 sun8i-a83t.dtsi |
Ondrej Jirman ARM: dts: sun8i-a83t: Add missing GPU trip point |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-h5-Add-missing-GPU-trip-point |
(+9/-0)[1M] |
c90dc8da0d49a165a8d01010a9350605211c50d7 sun50i-h5.dtsi |
Ondrej Jirman arm64: dts: sun50i-h5: Add missing GPU trip point |
| 📜 ✅ | [patches.megous/] Fix-intptr_t-typedef |
(+4/-0)[1M] |
b3040d7120a830c0d393b69365500fe983a47ca2 types.h |
Ondrej Jirman Fix intptr_t typedef |
📜 [needs_rebase] |
[patches.megous/] usb-gadget-Fix-dangling-pointer-in-netdev-private-data |
(+38/-9)[6M] |
d6952e98eb7f00e715d2d3ed9f9a43a8976931e7 f_rndis.c, f_eem.c, f_subset.c, f_ecm.c, f_ncm.c, u_ether.c |
Ondrej Jirman usb: gadget: Fix dangling pointer in netdev private data |
| 📜 ✅ | [patches.megous/] clk-sunxi-ng-Export-CLK_DRAM-for-devfreq |
(+2/-7)[2M] |
54abdcc3b5fb25718ede8898121e98b34e2f4fa2 sun8i-a83t-ccu.h, ccu-sun8i-a83t.h |
Samuel Holland clk: sunxi-ng: Export CLK_DRAM for devfreq |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-a83t-Add-MBUS-node |
(+15/-0)[1M] |
22070123a02495714e003c666ac09c66701d45f1 sun8i-a83t.dtsi |
Samuel Holland ARM: dts: sun8i: a83t: Add MBUS node |
| 📜 ✅ | [patches.megous/] usb-quirks-Add-USB_QUIRK_RESET-for-Quectel-EG25G-Modem |
(+3/-0)[1M] |
3c728988b378b7bf072ac5a83a5abaa05d096941 quirks.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= usb: quirks: Add USB_QUIRK_RESET for Quectel EG25G Modem |
| 📜 ✅ | [patches.megous/] misc-modem-power-Power-manager-for-modems |
(+2000/-0)[2M, 1A] |
794d7f1c50c346edac0989d30a1ce9e1f88b9ec4 modem-power.c, Kconfig, Makefile |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= misc: modem-power: Power manager for modems |
| 📜 ✅ | [patches.megous/] net-stmmac-sun8i-Use-devm_regulator_get-for-PHY-regulator |
(+10/-17)[1M] |
cdfabaec84317bab227e9aab97c23d4c535bfee1 dwmac-sun8i.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= net: stmmac: sun8i: Use devm_regulator_get for PHY regulator |
| 📜 ✅ | [patches.megous/] net-stmmac-sun8i-Rename-PHY-regulator-variable-to-regulator_phy |
(+9/-9)[1M] |
f1d4768b2c20b919c40b61f27aa636319a053d47 dwmac-sun8i.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= net: stmmac: sun8i: Rename PHY regulator variable to regulator_phy |
| 📜 ✅ | [patches.megous/] net-stmmac-sun8i-Add-support-for-enabling-a-regulator-for-PHY-I |
(+19/-1)[1M] |
1fda5a53732fd62275c2ce64b0062a651d00191a dwmac-sun8i.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= net: stmmac: sun8i: Add support for enabling a regulator for PHY I/O pins |
| 📜 ✅ | [patches.megous/] arm64-dts-allwinner-orange-pi-3-Enable-ethernet |
(+40/-0)[1M] |
e3d884555e5676690e4a2812d3fb5b4ef4bff296 sun50i-h6-orangepi-3.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: allwinner: orange-pi-3: Enable ethernet |
| 📜 ✅ | [patches.megous/] iio-adc-sun4i-gpadc-iio-Allow-to-use-sun5i-a13-gpadc-iio-from-D |
(+8/-1)[3M] |
02ced745b6003afa4416c5c7953871df5239d902 sun5i.dtsi, sun4i-gpadc-iio.c, sun4i-gpadc.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= iio: adc: sun4i-gpadc-iio: Allow to use sun5i-a13-gpadc-iio from DT |
| 📜 ✅ | [patches.megous/] mtd-spi-nor-Add-regulator-support |
(+34/-6)[2M] |
57025abade417c5d52a078cd12544a6fb3c49b40 core.c, spi-nor.h |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= mtd: spi-nor: Add regulator support |
| 📜 ✅ | [patches.megous/] input-cyttsp4-De-obfuscate-platform-data-for-keys |
(+9/-25)[2M] |
b7c73adb01e9a2d4508279878cd0944f54f812e6 cyttsp4_core.c, cyttsp4.h |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= input: cyttsp4: De-obfuscate platform data for keys |
| 📜 ✅ | [patches.megous/] input-cyttsp4-Remove-useless-indirection-with-driver-platform-d |
(+128/-149)[3M] |
ca9945196982024e6bd94676ae3c226f04f524cc cyttsp4_core.c, cyttsp4.h, cyttsp4_core.h |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= input: cyttsp4: Remove useless indirection with driver/platform data |
| 📜 ✅ | [patches.megous/] input-cyttsp4-Remove-unused-enable_vkeys |
(+0/-1)[1M] |
0e0dbd91288b2e83c9e46cc82c356b25247dfc2a cyttsp4.h |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= input: cyttsp4: Remove unused enable_vkeys |
| 📜 ✅ | [patches.megous/] input-cyttsp4-De-obfuscate-MT-signals-setup-platform-data |
(+66/-89)[3M] |
1299f88babe380ed00dc9a2fa18293c7c77f364b cyttsp4_core.c, cyttsp4.h, cyttsp4_core.h |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= input: cyttsp4: De-obfuscate MT signals setup/platform data |
| 📜 ✅ | [patches.megous/] input-cyttsp4-Clear-the-ids-buffer-in-a-saner-way |
(+1/-2)[1M] |
3ccdde34f3e280c1269cf035ffd4115daa34d99e cyttsp4_core.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= input: cyttsp4: Clear the ids buffer in a saner way |
| 📜 ✅ | [patches.megous/] input-cyttsp4-ENOSYS-error-is-ok-when-powering-up |
(+2/-1)[1M] |
4ee7ec689bba4e2b3efe6baea6e32f53238c7097 cyttsp4_core.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= input: cyttsp4: ENOSYS error is ok when powering up |
| 📜 ✅ | [patches.megous/] input-cyttsp4-Faster-recovery-from-failed-wakeup-HACK |
(+1/-1)[1M] |
431a18bfcc015e74cb0b8a196528d26272def166 cyttsp4_core.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= input: cyttsp4: Faster recovery from failed wakeup (HACK) |
| 📜 ✅ | [patches.megous/] input-cyttsp4-Use-i2c-spi-names-directly-in-the-driver |
(+3/-5)[3M] |
933550974d4cc7f5ac161b77b27f22c19db08abf cyttsp4_i2c.c, cyttsp4_spi.c, cyttsp4.h |
Ondrej Jirman input: cyttsp4: Use i2c/spi names directly in the driver |
| 📜 ✅ | [patches.megous/] input-cyttsp4-Port-the-driver-to-use-device-properties |
(+150/-189)[2M, 1D] |
76435e1e056549c924a2fffa1cd560b94768f67d cyttsp4_core.c, cyttsp4.h, cyttsp4_core.h |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= input: cyttsp4: Port the driver to use device properties |
| 📜 ✅ | [patches.megous/] input-cyttsp4-Restart-on-wakeup-wakeup-by-I2C-read-doesn-t-work |
(+20/-10)[1M] |
d6eed85fd16d5856447a53e315d73471a5d1469e cyttsp4_core.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= input: cyttsp4: Restart on wakeup (wakeup by I2C read doesn't work) |
| 📜 ✅ | [patches.megous/] input-cyttsp4-Fix-warnings |
(+3/-1)[1M] |
8dde379aae03fdeece7218996f847a80ff967acb cyttsp4_core.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= input: cyttsp4: Fix warnings |
| 📜 ✅ | [patches.megous/] input-cyttsp4-Make-the-driver-not-hog-the-system-s-workqueue |
(+16/-7)[2M] |
09c2e21243210578c93202a236e8ed1005b18d67 cyttsp4_core.c, cyttsp4_core.h |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= input: cyttsp4: Make the driver not hog the system's workqueue |
| 📜 ✅ | [patches.megous/] regulator-Add-simple-driver-for-enabling-a-regulator-from-users |
(+147/-0)[2M, 1A] |
bbc438deea93a503d5d0cb503d6c49621f87bb21 userspace-consumer-of.c, Kconfig, Makefile |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= regulator: Add simple driver for enabling a regulator from userspace |
| 📜 ✅ | [patches.megous/] regulator-tp65185x-Add-tp65185x-eInk-panel-regulator-driver |
(+437/-0)[2M, 1A] |
425d6b2d111a96fbe5785b0e57cfb5eeb58dd201 tp65185x.c, Kconfig, Makefile |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= regulator: tp65185x: Add tp65185x eInk panel regulator driver |
| 📜 ✅ | [patches.megous/] regulator-tp65185-Add-hwmon-device-for-reading-temperature |
(+127/-7)[1M] |
d63ae9d110165244bd96c6ef46d1259190b54170 tp65185x.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= regulator: tp65185: Add hwmon device for reading temperature |
| 📜 ✅ | [patches.megous/] ARM-dts-sun5i-Add-soc-handle |
(+1/-1)[1M] |
6f89b1344d911d854822a8e1b79cec3b64627916 sun5i.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sun5i: Add soc handle |
| 📜 ✅ | [patches.megous/] ARM-dts-sun5i-Add-PocketBook-Touch-Lux-3-display-ctp-support |
(+103/-2)[1M] |
1bae415d09accd16676aec8956912f05ab99f90b sun5i-a13-pocketbook-touch-lux-3.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sun5i: Add PocketBook Touch Lux 3 display/ctp support |
| 📜 ✅ | [patches.megous/] ARM-dts-sun5i-a13-pocketbook-touch-lux-3-Add-RTC-clock-cells |
(+1/-0)[1M] |
a478821392ad2cb3132672a047f5f061b0962e17 sun5i-a13-pocketbook-touch-lux-3.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sun5i-a13-pocketbook-touch-lux-3: Add RTC clock-cells |
| 📜 ✅ | [patches.megous/] mfd-sun4i-gpadc-Interrupt-numbers-should-start-from-1 |
(+2/-2)[1M] |
12ef50c759dac7d9d735413295a2b213f57c4b07 sun4i-gpadc.h |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= mfd: sun4i-gpadc: Interrupt numbers should start from 1 |
| 📜 ✅ | [patches.megous/] input-cyttsp4-Fix-probe-oops |
(+3/-0)[1M] |
a65d0cc3457a14b0bde5554544ecbd1af364d85d cyttsp4_core.c |
Ondrej Jirman input: cyttsp4: Fix probe oops |
| 📜 ✅ | [patches.megous/] arm64-dts-allwinner-a64-pinetab-add-front-camera |
(+44/-6)[1M] |
12d79b777c67f46e487bf89af9859bc490bb4906 sun50i-a64-pinetab.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: allwinner: a64: pinetab: add front camera |
| 📜 ✅ | [patches.megous/] arm64-allwinner-dts-a64-enable-K101-IM2BYL02-panel-for-PineTab |
(+3/-5)[1M] |
2eb2735ed562eb860cf3e38e3f855b7d3b052025 sun50i-a64-pinetab.dts |
Icenowy Zheng arm64: allwinner: dts: a64: enable K101-IM2BYL02 panel for PineTab |
| 📜 ✅ | [patches.megous/] iio-core-Add-option-to-force-identity-mount-matrix |
(+12/-0)[1M] |
037373c2c2bf81906e02c3850297c5ef17533f6a industrialio-core.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= iio: core: Add option to force identity mount matrix |
| 📜 ✅ | [patches.megous/] input-touchscreen-goodix-Add-config-debugfs-file |
(+18/-0)[2M] |
3695f8d34d5656c233b4da3fef3fae8ef841ec24 goodix.c, goodix.h |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= input: touchscreen: goodix: Add config debugfs file |
| 📜 ✅ | [patches.megous/] input-goodix-Add-option-to-power-off-the-controller-during-susp |
(+38/-0)[2M] |
28297694c5afd032aa902274c7b19675000a5172 goodix.c, goodix.h |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= input: goodix: Add option to power off the controller during suspend |
| 📜 ✅ | [patches.megous/] arm64-dts-allwinner-a64-Fix-LRADC-compatible |
(+1/-1)[1M] |
1f366d39e3739c94e74695996612fbe951ceba15 sun50i-a64.dtsi |
Icenowy Zheng arm64: dts: allwinner: a64: Fix LRADC compatible |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Add-front-back-cameras |
(+89/-0)[1M] |
2242b8068c15f7cf5b59f89830ad18c8ec82c52d sun50i-a64-pinephone.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: sun50i-a64-pinephone: Add front/back cameras |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Add-Type-C-support-for-all-PP-va |
(+299/-1)[4M] |
461324ecd410e0b6ec3b09c508efae9cc35e1988 sun50i-a64-pinephone-1.0.dts, sun50i-a64-pinephone-1.1.dts, sun50i-a64-pinephone.dtsi, sun50i-a64-pinephone-1.2.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: sun50i-a64-pinephone: Add Type-C support for all PP variants 1.0-1.2 |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Add-modem-power-manager |
(+68/-0)[3M] |
ef7cf44607ad1d1dca403c8da473b1fd1ebaf6d2 sun50i-a64-pinephone-1.1.dts, sun50i-a64-pinephone-1.2.dts, sun50i-a64-pinephone-1.0.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: sun50i-a64-pinephone: Add modem power manager |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Fix-BH-modem-manager-behavior |
(+2/-2)[1M] |
7c6168b3f76bb297797808dd3b334cb370750b05 sun50i-a64-pinephone-1.1.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: sun50i-a64-pinephone: Fix BH modem manager behavior |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Add-detailed-OCV-to-capactiy-con |
(+151/-0)[1M] |
41143682063f2ed2c040800fd70a5473f1fa288c sun50i-a64-pinephone.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: sun50i-a64-pinephone: Add detailed OCV to capactiy conversion table |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Shorten-post-power-on-delay-on-m |
(+3/-0)[1M] |
fb0e9c30baa59ab31bc04e227c87198aac331187 sun50i-a64-pinephone.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: sun50i-a64-pinephone: Shorten post-power-on-delay on mmcs |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Add-mount-matrix-for-acceleromet |
(+3/-0)[1M] |
0d86e81e8a42bb008375f56b0254c9598656695e sun50i-a64-pinephone.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: sun50i-a64-pinephone: Add mount matrix for accelerometer |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Add-support-for-Bluetooth-audio |
(+1/-0)[1M] |
0b3942d30f69860bd8e77a23b8f942ad263b0820 sun50i-a64-pinephone.dtsi |
Samuel Holland arm64: dts: sun50i-a64-pinephone: Add support for Bluetooth audio |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Enable-internal-HMIC-bias |
(+4/-0)[1M] |
a8b5ac451718218a071c3bad6dae34bc2fb4d482 sun50i-a64-pinephone-1.0.dts |
Samuel Holland arm64: dts: sun50i-a64-pinephone: Enable internal HMIC bias |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Add-support-for-modem-audio |
(+24/-1)[1M] |
e89d774ccd2bcdb58462ba91c21cdbf65216eeb3 sun50i-a64-pinephone.dtsi |
Samuel Holland arm64: dts: sun50i-a64-pinephone: Add support for modem audio |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Retain-leds-state-in-suspend |
(+3/-0)[1M] |
1f00ca8ce08ef156114242a5167fa9ecae3d561b sun50i-a64-pinephone.dtsi |
Miles Alan arm64: dts: sun50i-a64-pinephone: Retain leds state in suspend |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Bump-I2C-frequency-to-400kHz |
(+2/-0)[1M] |
0f1803de51634551377ba9432f727b855a2122d8 sun50i-a64-pinephone.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: sun50i-a64-pinephone: Bump I2C frequency to 400kHz |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Add-interrupt-pin-for-WiFi |
(+2/-0)[1M] |
292b7b1508ae828ffaca5fb56a7ce6c204016806 sun50i-a64-pinephone.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: sun50i-a64-pinephone: Add interrupt pin for WiFi |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Power-off-the-touch-controller-i |
(+1/-0)[1M] |
b326bb5a2ac51c46a3e3f3934bc8e3029cffa431 sun50i-a64-pinephone.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: sun50i-a64-pinephone: Power off the touch controller in sleep |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Don-t-make-lradc-keys-a-wakeup-s |
(+1/-1)[1M] |
6404c1a9749da4e57a2824746a5de833f952a573 sun50i-a64-pinephone.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: sun50i-a64-pinephone: Don't make lradc keys a wakeup source |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Set-minimum-backlight-duty-cycle |
(+2/-31)[2M] |
ae60e56cfdd6bf1946db40f05a1560219fe79f1e sun50i-a64-pinephone-1.2.dts, sun50i-a64-pinephone-1.1.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: sun50i-a64-pinephone: Set minimum backlight duty cycle to 10% |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Add-supply-for-i2c-bus-to-anx768 |
(+3/-0)[3M] |
eaa99f30be411328b998a3c5fa5e3d64a54464f7 sun50i-a64-pinephone-1.0.dts, sun50i-a64-pinephone-1.1.dts, sun50i-a64-pinephone-1.2.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: sun50i-a64-pinephone: Add supply for i2c bus to anx7688 |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Workaround-broken-HDMI-HPD-signa |
(+15/-3)[3M] |
4e666181f1e4acc5af7693fbd853388a6bf59b63 sun50i-a64-pinephone-1.0.dts, sun50i-a64-pinephone-1.1.dts, sun50i-a64-pinephone-1.2.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: sun50i-a64-pinephone: Workaround broken HDMI HPD signal |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Add-AF8133J-to-PinePhone |
(+9/-0)[1M] |
a9ddfa99017206df7af5177c91f54daa96fe6178 sun50i-a64-pinephone.dtsi |
Icenowy Zheng arm64: dts: sun50i-a64-pinephone: Add AF8133J to PinePhone |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Add-mount-matrix-for-PinePhone-m |
(+6/-0)[1M] |
7380991e40daada70861e26bd779b8e732df63ce sun50i-a64-pinephone.dtsi |
Shoji Keita arm64: dts: sun50i-a64-pinephone: Add mount-matrix for PinePhone magnetometers. |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Add-support-for-Pinephone-keyboa |
(+136/-0)[1M] |
d9656e79b7dc98ad288ca5b297526baadf8fcd4d sun50i-a64-pinephone.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: sun50i-a64-pinephone: Add support for Pinephone keyboard |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-pinephone-Enable-Pinephone-Keyboard-power- |
(+9/-0)[1M] |
ab6e1006ca80af5882b448615fcb0bca5ff62b0c sun50i-a64-pinephone.dtsi |
Ondrej Jirman arm64: dts: sun50i-a64-pinephone: Enable Pinephone Keyboard power manager |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-Add-missing-trip-points-for-GPU |
(+18/-0)[1M] |
c51ab1bf584e3d0a8580b34b5de1a413ddfa1ccd sun50i-a64.dtsi |
Ondrej Jirman arm64: dts: sun50i-a64: Add missing trip points for GPU |
| 📜 ✅ | [patches.megous/] arm64-dts-allwinner-sun50i-a64-pinephone-Add-support-for-Pineph |
(+30/-12)[2M, 1A] |
f896e3d7b8a1d33842e6091f5bb144dfbe394ebe sun50i-a64-pinephone-1.2b.dts, sun50i-a64-pinephone.dtsi, Makefile |
Ondrej Jirman arm64: dts: allwinner: sun50i-a64-pinephone: Add support for Pinephone 1.2 beta |
| 📜 ✅ | [patches.megous/] iio-stk3310-Implement-vdd-supply-and-power-it-off-during-suspen |
(+45/-3)[1M] |
c233aaeb88c413f5ef010d361e6815d68d4b29dc stk3310.c |
Ondrej Jirman iio: stk3310: Implement vdd supply and power it off during suspend |
| 📜 ✅ | [patches.megous/] iio-light-stk3310-Add-support-for-I2C-regulator |
(+25/-1)[1M] |
8863a3aa97d364c7c36bf963784065f8cb923e47 stk3310.c |
Ondrej Jirman iio: light: stk3310: Add support for I2C regulator |
| 📜 ✅ | [patches.megous/] input-touch-goodix-Try-to-keep-regulator-enable-disable-balance |
(+1/-0)[1M] |
b8f75ebd28aa2573efddd4de677ac116dc424bca goodix.c |
Ondrej Jirman input: touch: goodix: Try to keep regulator enable/disable balanced |
| 📜 ✅ | [patches.megous/] ARM-dts-allwinner-sun50i-64-pinephone-Add-power-supply-to-stk33 |
(+1/-0)[1M] |
7eca50756fc910b542969ba8cc205b7da5eea357 sun50i-a64-pinephone.dtsi |
Ondrej Jirman ARM: dts: allwinner: sun50i-64-pinephone: Add power supply to stk3311 |
| 📜 ✅ | [patches.megous/] power-supply-ip5xxx-Report-remaining-battery-capacity |
(+43/-0)[1M] |
c957002e1beebb58ecea2a28c282466fdb451d8c ip5xxx_power.c |
Ondrej Jirman power: supply: ip5xxx: Report remaining battery capacity |
| 📜 ✅ | [patches.megous/] power-supply-ip5xxx-Modify-initial-configuration |
(+15/-7)[1M] |
fa3f5dd420f0200f2479785465eaf0af7eecf2c4 ip5xxx_power.c |
Ondrej Jirman power: supply: ip5xxx: Modify initial configuration |
| 📜 ✅ | [patches.megous/] power-supply-ip5xxx-Add-boost-status-property |
(+12/-1)[1M] |
0fca8b2f41acc8ad824bc83862a1b7bf69a87a89 ip5xxx_power.c |
Ondrej Jirman power: supply: ip5xxx: Add boost status property |
| 📜 ✅ | [patches.megous/] power-supply-ip5xxx-Add-ip5xxx-usb-supply |
(+44/-0)[1M] |
c2dee0f524b3b13b1f6921814a85d849714f4e4f ip5xxx_power.c |
Ondrej Jirman power: supply: ip5xxx: Add ip5xxx-usb supply |
| 📜 ✅ | [patches.megous/] power-supply-ip5xxx-Add-support-for-POWER_SUPPLY_PROP_CHARGE_BE |
(+29/-0)[1M] |
308c100aa3a10e1ec55a21cf7efdfb60498b5ddd ip5xxx_power.c |
Ondrej Jirman power: supply: ip5xxx: Add support for POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR |
| 📜 ✅ | [patches.megous/] power-supply-ip5xxx-Add-support-for-POWER_SUPPLY_PROP_ENERGY_FU |
(+10/-0)[1M] |
8535a8ee83cde470d1b1f92ac96701448335c8a7 ip5xxx_power.c |
Ondrej Jirman power: supply: ip5xxx: Add support for POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN |
| 📜 ✅ | [patches.megous/] input-pinephone-keyboard-Allow-disabling-the-keyboard-input |
(+7/-0)[1M] |
2c803dd9f56560d01e9314e5403416807b2eb783 pinephone-keyboard.c |
Ondrej Jirman input: pinephone-keyboard: Allow disabling the keyboard input |
| 📜 ✅ | [patches.megous/] input-pinephone-keyboard-Allow-to-disable-Fn-layer-processing |
(+12/-0)[1M] |
3bb58ad13a650a044d10f6dcd1b82ddb3f4fc81d pinephone-keyboard.c |
Ondrej Jirman input: pinephone-keyboard: Allow to disable Fn layer processing |
| 📜 ✅ | [patches.megous/] input-pinephone-keyboard-Don-t-print-error-when-the-keyboard-is |
(+5/-0)[1M] |
34598f3311b6227e2c0fb69b131afb037be9b305 pinephone-keyboard.c |
Ondrej Jirman input: pinephone-keyboard: Don't print error when the keyboard is not connected |
| 📜 ✅ | [patches.megous/] misc-ppkb-manager-Pinephone-Keyboard-power-manager |
(+953/-0)[2M, 1A] |
c9cdd66a637da79a51ec0598bfb21c7a8dbd9deb ppkb-manager.c, Kconfig, Makefile |
Ondrej Jirman misc: ppkb-manager: Pinephone Keyboard power manager |
| 📜 ✅ | [patches.megous/] input-pinephone-keyboard-Wait-a-bit-after-enabling-vbus |
(+2/-0)[1M] |
db56af94fbed839837c26cb1d9aa949f8c749036 pinephone-keyboard.c |
Ondrej Jirman input: pinephone-keyboard: Wait a bit after enabling vbus |
| 📜 ✅ | [patches.megous/] misc-ppkb-manager-Remove-BLOCKED-flag |
(+0/-8)[1M] |
ac73bf02f95d23d397daf05269766ca1ce6bae3b ppkb-manager.c |
Ondrej Jirman misc: ppkb-manager: Remove BLOCKED flag |
| 📜 ✅ | [patches.megous/] misc-ppkb-manager-Disable-ppkb-manager-by-default-can-be-enable |
(+2/-1)[1M] |
7058b325624763d511151d74c8ba57cc4df9757b ppkb-manager.c |
Ondrej Jirman misc: ppkb-manager: Disable ppkb-manager by default (can be enabled at runtime) |
| 📜 ✅ | [patches.megous/] misc-ppkb-manager-Show-read-write-error-codes |
(+3/-3)[1M] |
0fc7e759726bee18c60ee37448c888bd9a553577 ppkb-manager.c |
Ondrej Jirman misc: ppkb-manager: Show read/write error codes |
| 📜 ✅ | [patches.megous/] misc-ppkb-manager-Disable-debug-mode |
(+1/-1)[1M] |
9767dc59ee6a49b07d274ff717ac2f6277f9c8f5 ppkb-manager.c |
Ondrej Jirman misc: ppkb-manager: Disable debug mode |
| 📜 ✅ | [patches.megous/] clk-Implement-protected-clocks-for-all-OF-clock-providers |
(+87/-0)[3M] |
958a7128bcf2b7eccb8f47525e074040c2cadce9 clk-conf.c, clk.c, clk.h |
Samuel Holland clk: Implement protected-clocks for all OF clock providers |
| 📜 ✅ | [patches.megous/] Revert-clk-qcom-Support-protected-clocks-property |
(+0/-18)[1M] |
2c84adf7ebf4bceaeabf28d608d145c95b340608 common.c |
Samuel Holland Revert "clk: qcom: Support 'protected-clocks' property" |
| 📜 ✅ | [patches.megous/] ARM-dts-sunxi-a83t-Protect-SCP-clocks |
(+2/-0)[1M] |
b4db722dc36033684f813b9518f014fa7f6a5868 sun8i-a83t.dtsi |
Samuel Holland ARM: dts: sunxi: a83t: Protect SCP clocks |
| 📜 ✅ | [patches.megous/] ARM-dts-sunxi-h3-h5-Protect-SCP-clocks |
(+2/-0)[1M] |
d1821e421e6593c922b59b0a260343abfd3c377a sunxi-h3-h5.dtsi |
Samuel Holland ARM: dts: sunxi: h3/h5: Protect SCP clocks |
| 📜 ✅ | [patches.megous/] arm64-dts-allwinner-a64-Protect-SCP-clocks |
(+2/-0)[1M] |
6109e1df4fbbf9a9e882e7bcd449a0c4cb114633 sun50i-a64.dtsi |
Samuel Holland arm64: dts: allwinner: a64: Protect SCP clocks |
| 📜 ✅ | [patches.megous/] arm64-dts-allwinner-h6-Protect-SCP-clocks |
(+2/-0)[1M] |
c7008b581394914042383e16947e1fb2b77eaab1 sun50i-h6.dtsi |
Samuel Holland arm64: dts: allwinner: h6: Protect SCP clocks |
| 📜 ✅ | [patches.megous/] bus-sunxi-rsb-Always-check-register-address-validity |
(+3/-0)[1M] |
1e30cb4e07dc13051f2cf5c746614b95b3821183 sunxi-rsb.c |
Samuel Holland bus: sunxi-rsb: Always check register address validity |
| 📜 ✅ | [patches.megous/] firmware-arm_scpi-Support-unidirectional-mailbox-channels |
(+46/-12)[1M] |
a82462ae5519373b5c45ef8738d19797656a8ba7 arm_scpi.c |
Samuel Holland firmware: arm_scpi: Support unidirectional mailbox channels |
| 📜 ✅ | [patches.megous/] ARM-dts-sunxi-a83t-Add-SCPI-protocol |
(+21/-0)[1M] |
653680e020ea6ad9dc1b3935735c332bcacb2030 sun8i-a83t.dtsi |
Samuel Holland ARM: dts: sunxi: a83t: Add SCPI protocol |
| 📜 ✅ | [patches.megous/] ARM-dts-sunxi-h3-h5-Add-SCPI-protocol |
(+33/-0)[3M] |
ea0196cf95e189c059c5e531359256d981b37776 sun8i-h3.dtsi, sun50i-h5.dtsi, sunxi-h3-h5.dtsi |
Samuel Holland ARM: dts: sunxi: h3/h5: Add SCPI protocol |
| 📜 ✅ | [patches.megous/] arm64-dts-allwinner-a64-Add-SCPI-protocol |
(+20/-0)[1M] |
cc742622411224a5dfc9d6a86b5e322928ae43f0 sun50i-a64.dtsi |
Samuel Holland arm64: dts: allwinner: a64: Add SCPI protocol |
| 📜 ✅ | [patches.megous/] arm64-dts-allwinner-h6-Add-SCPI-protocol |
(+20/-0)[1M] |
96e32be6a01b1dcbd49fe695bfdb59c020aabe60 sun50i-h6.dtsi |
Samuel Holland arm64: dts: allwinner: h6: Add SCPI protocol |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-a83t-tbs-a711-Give-Linux-more-privileges-over-SCP |
(+5/-2)[1M] |
d87998ad459de94668392f018db24cffa8fc3076 sun8i-a83t.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sun8i-a83t-tbs-a711: Give Linux more privileges over SCPI |
| 📜 ✅ | [patches.megous/] rtc-sun6i-Allow-RTC-wakeup-after-shutdown |
(+11/-1)[1M] |
e7d77bdd09a4a18498c8c85423287077f723a5f3 rtc-sun6i.c |
Samuel Holland rtc: sun6i: Allow RTC wakeup after shutdown |
| 📜 ✅ | [patches.megous/] mmc-sunxi-mmc-Remove-runtime-PM |
(+19/-16)[1M] |
26c4f7a0048a4c73356fd19d25f876c0233ac449 sunxi-mmc.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= mmc: sunxi-mmc: Remove runtime-PM |
| 📜 ✅ | [patches.megous/] arm64-dts-pinephone-Add-reboot-mode-driver |
(+37/-0)[1M] |
fa62ac32706f24fcd22a37ab09d3632199bd9229 sun50i-a64-pinephone.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: pinephone: Add reboot mode driver |
| 📜 ✅ | [patches.megous/] tty-serial-8250-dw-Use-fifo-size-from-DTS |
(+7/-0)[2M] |
4874f3782431358718fff2fd1421c67bb87dece7 8250_dw.c, 8250_port.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= tty: serial: 8250-dw: Use fifo-size from DTS |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-a64-Set-fifo-size-for-uarts |
(+5/-0)[1M] |
97a3485ca4862528b8de563fd2e2b52aadea8805 sun50i-a64.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: sun50i-a64: Set fifo-size for uarts |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-a83t-Set-fifo-size-for-uarts |
(+5/-0)[1M] |
89e3c6e5cd6e6e3c664c683d3e41146d4d1a2317 sun8i-a83t.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sun8i-a83t: Set fifo-size for uarts |
| 📜 ✅ | [patches.megous/] Mark-some-slow-drivers-for-async-probe-with-PROBE_PREFER_ASYNCH |
(+2/-0)[2M] |
5335aab401ad6d2f76b1cccfc8b55121202fa37e bma180.c, i2c.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= Mark some slow drivers for async probe with PROBE_PREFER_ASYNCHRONOUS |
| 📜 ✅ | [patches.megous/] arm64-xor-Select-32regs-without-benchmark-to-speed-up-boot |
(+4/-10)[1M] |
fa63689122485ae70777fc275482e08ff81ec9c1 xor.h |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: xor: Select 32regs without benchmark to speed up boot |
| 📜 ✅ | [patches.megous/] dt-bindings-leds-Add-a-binding-for-AXP813-charger-led |
(+24/-0)[1A] |
3241f1685588d3b961170de7a70f000f6ecc3219 leds-axp20x.yaml |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= dt-bindings: leds: Add a binding for AXP813 charger led |
📜 [needs_rebase] |
[patches.megous/] leds-axp20x-Support-charger-LED-on-AXP20x-like-PMICs |
(+274/-0)[3M, 1A] |
162eaa023a852dbe3fde00eb4182e827df17db29 leds-axp20x.c, Kconfig, axp20x.c, Makefile |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= leds: axp20x: Support charger LED on AXP20x like PMICs |
| 📜 ✅ | [patches.megous/] ARM-dts-axp813-Add-charger-LED |
(+5/-0)[1M] |
bbbcb15f0bd8ed9bdb3fc2bb4fc25e2b583fccdb axp81x.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: axp813: Add charger LED |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-a83t-tbs-a711-Enable-charging-LED |
(+4/-0)[1M] |
baa12af586d85bc199694128b59348c5da8c27f7 sun8i-a83t-tbs-a711.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sun8i-a83t-tbs-a711: Enable charging LED |
| 📜 ✅ | [patches.megous/] nfc-pn544-Add-support-for-VBAT-PVDD-regulators |
(+29/-2)[1M] |
97eac1aa728d0ebb400da93ba699c26ce376e452 i2c.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= nfc: pn544: Add support for VBAT/PVDD regulators |
| 📜 ✅ | [patches.megous/] bluetooth-bcm-Restore-drive_rts_on_open-true-behavior-on-bcm207 |
(+6/-1)[1M] |
e57a720b8b9c36575181c0f91924185c334a9065 hci_bcm.c |
Ondrej Jirman bluetooth: bcm: Restore drive_rts_on_open = true behavior on bcm20702a1 |
| 📜 ✅ | [patches.megous/] mmc-add-delay-after-power-class-selection |
(+4/-0)[1M] |
b215e1aaaef3de9337cdac419da808f6d03d9591 mmc.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= mmc: add delay after power class selection |
| 📜 ✅ | [patches.megous/] dt-bindings-input-gpio-vibrator-Don-t-require-enable-gpios |
(+6/-1)[1M] |
975c423699ded4d6385b75a8cbb5a4753acaa2e1 gpio-vibrator.yaml |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= dt-bindings: input: gpio-vibrator: Don't require enable-gpios |
| 📜 ✅ | [patches.megous/] input-gpio-vibra-Allow-to-use-vcc-supply-alone-to-control-the-v |
(+18/-7)[1M] |
51f05452f7135f5bec4ccb0cab401fe850d70bb9 gpio-vibra.c |
Ondrej Jirman input: gpio-vibra: Allow to use vcc-supply alone to control the vibrator |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-a83t-tbs-a711-Add-support-for-the-vibrator-motor |
(+5/-0)[1M] |
3fce67207a4daf46ab9b2e54f03b89d561323e0c sun8i-a83t-tbs-a711.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sun8i-a83t-tbs-a711: Add support for the vibrator motor |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-a83t-tbs-a711-Increase-voltage-on-the-vibrator |
(+2/-2)[1M] |
fe6cfb47edcc2560130a24e594dc7b772fb3c148 sun8i-a83t-tbs-a711.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sun8i-a83t-tbs-a711: Increase voltage on the vibrator |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-a83t-tbs-a711-Add-PN544-NFC-support |
(+15/-3)[1M] |
66c2aebd80add2609d49e3ef635f14ea5d6cd89b sun8i-a83t-tbs-a711.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sun8i-a83t-tbs-a711: Add PN544 NFC support |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-a83t-tbs-a711-Add-powerup-down-support-for-the-3G |
(+12/-1)[1M] |
612f51e1523889ece36f30582efe0c65bdfd8222 sun8i-a83t-tbs-a711.dts |
=?UTF-8?q?Myl=C3=A8ne=20Josserand?= ARM: dts: sun8i-a83t-tbs-a711: Add powerup/down support for the 3G modem |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-a83t-Add-cedrus-video-codec-support-to-A83T-untes |
(+10/-0)[1M] |
e6aca79ba93e83f7a01e6b8b5e25afe5053325ba sun8i-a83t.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sun8i-a83t: Add cedrus video codec support to A83T [untested] |
| 📜 ✅ | [patches.megous/] ARM-dts-suni-a83t-Add-i2s0-pins |
(+5/-0)[1M] |
6fd4d29ac29b3e2c64a25e9b8f563e489396b087 sun8i-a83t.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: suni-a83t: Add i2s0 pins |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-a83t-tbs-a711-Add-sound-support-via-AC100-codec |
(+85/-0)[1M] |
6093c372ca3d9a22e8cff7474e295862c60762dc sun8i-a83t-tbs-a711.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sun8i-a83t-tbs-a711: Add sound support via AC100 codec |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-a83t-tbs-a711-Add-regulators-to-the-accelerometer |
(+2/-0)[1M] |
e6c6ce5bf3f28ecbc53cd302e70992c3ce921320 sun8i-a83t-tbs-a711.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sun8i-a83t-tbs-a711: Add regulators to the accelerometer |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-a83t-tbs-a711-Add-camera-sensors-HM5065-GC2145 |
(+99/-2)[1M] |
3d0810d751a03c37b00a0e31fd4dfc68c6693344 sun8i-a83t-tbs-a711.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sun8i-a83t-tbs-a711: Add camera sensors (HM5065, GC2145) |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-a83t-tbs-a711-Add-flash-led-support |
(+9/-0)[1M] |
3404d4fb0a97c3267348f0187ccf1c720dcff204 sun8i-a83t-tbs-a711.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sun8i-a83t-tbs-a711: Add flash led support |
| 📜 ✅ | [patches.megous/] clk-sunxi-ng-Set-maximum-P-and-M-factors-to-1-for-H3-pll-cpux-c |
(+15/-9)[1M] |
bda39283d32624f2de97d29581aec6492dd91092 ccu-sun8i-h3.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= clk: sunxi-ng: Set maximum P and M factors to 1 for H3 pll-cpux clock |
| 📜 ✅ | [patches.megous/] clk-sunxi-ng-Don-t-use-CPU-PLL-gating-and-CPUX-reparenting-to-H |
(+0/-21)[1M] |
f6880f8cdb9634aad689e5352ac88b98d8dd0621 ccu-sun8i-h3.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= clk: sunxi-ng: Don't use CPU PLL gating and CPUX reparenting to HOSC |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-h3-Use-my-own-more-aggressive-OPPs-on-H3 |
(+36/-0)[1M] |
026d9120fd2b0bb516e10a7e9cfffdebbaeb02d7 sun8i-h3.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sun8i-h3: Use my own more aggressive OPPs on H3 |
| 📜 ✅ | [patches.megous/] arm64-dts-sun50i-h5-Use-my-own-more-aggressive-OPPs-on-H5 |
(+22/-22)[1M] |
93c2e9ba43f2b4883bf79eebe4ec3be03d9e7913 sun50i-h5-cpu-opp.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= arm64: dts: sun50i-h5: Use my own more aggressive OPPs on H5 |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-h3-orange-pi-pc-Increase-max-CPUX-voltage-to-1.4V |
(+2/-1)[1M] |
958f72e491c951c616309cebf288131926ccc43d sun8i-h3-orangepi-pc.dts |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sun8i-h3-orange-pi-pc: Increase max CPUX voltage to 1.4V |
| 📜 ✅ | [patches.megous/] ARM-dts-sun8i-a83t-Improve-CPU-OPP-tables-go-up-to-1.8GHz |
(+22/-58)[1M] |
161e343d34f3d4b6e46adcf2a6dac7d833e1ffcf sun8i-a83t.dtsi |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= ARM: dts: sun8i-a83t: Improve CPU OPP tables (go up to 1.8GHz) |
| 📜 ✅ | [patches.megous/] cpufreq-sun50i-Show-detected-CPU-bin-for-easier-debugging |
(+1/-0)[1M] |
ff6a0b87a1db87f13b5d58e2e6609431651e812e sun50i-cpufreq-nvmem.c |
=?UTF-8?q?Ond=C5=99ej=20Jirman?= cpufreq: sun50i: Show detected CPU bin, for easier debugging |
| 📜 ✅ | [patches.fixes/] Fix-warning-multi-line-comment |
(+1/-1)[1M] |
256297d26c14753d5d7873092b40269b03cb0466 af8133j.c |
The-going Fix: warning: multi-line comment |
| 📜 ✅ | [patches.fixes/] Fix-duplicate-nodes-for-sun50i-h5-orangepi-pc2 |
(+0/-20)[1M] |
2f6f2c95c00ca4bba39b10df2ce35bbeb10b8e8a sun50i-h5-orangepi-pc2.dts |
The-going Fix duplicate nodes for sun50i-h5-orangepi-pc2 |
| 📜 ✅ | [patches.armbian/] Doc-dt-bindings-usb-add-binding-for-DWC3-controller-on-Allwinne |
(+39/-0)[1A] |
c70a384d2cadbf7a850f560487235d2841379873 allwinner,dwc3.txt |
Icenowy Zheng Doc:dt-bindings:usb: add binding for DWC3 controller on Allwinner SoC |
| 📜 ✅ | [patches.armbian/] drv-pinctrl-pinctrl-sun50i-a64-disable_strict_mode |
(+1/-0)[1M] |
7c78885d6a10ddfb06c02ae335e257b1ab319c61 pinctrl-sun50i-a64.c |
WaterByWind drv:pinctrl: pinctrl-sun50i-a64 disable_strict_mode |
| 📜 ✅ | [patches.armbian/] drv-rtc-sun6i-support-RTCs-without-external-LOSCs |
(+11/-5)[1M] |
3efca900563822818f48ea6b4cf0b0567deca5f6 rtc-sun6i.c |
Andre Przywara drv:rtc:sun6i: support RTCs without external LOSCs |
| 📜 ✅ | [patches.armbian/] drv-gpu-drm-gem-dma-Export-with-handle-allocator |
(+6/-1)[2M] |
3ed5fc9cbc81e6313162b3341fddf3c70c698648 drm_gem_dma_helper.h, drm_gem_dma_helper.c |
Maxime Ripard drv:gpu:drm: gem: dma: Export with handle allocator |
| 📜 ✅ | [patches.armbian/] drv-gpu-drm-sun4i-Add-GEM-allocator |
(+56/-0)[1M, 1A] |
5122376b32a18b0483f16e308ac7a555d4e003e9 sun4i_drm.h, sun4i_drv.c |
Maxime Ripard drv:gpu:drm:sun4i: Add GEM allocator |
| 📜 ✅ | [patches.armbian/] drv-gpu-drm-sun4i-Add-HDMI-audio-sun4i-hdmi-encoder |
(+516/-0)[4M, 1A] |
a1c9d9104dd376d4d6498bb454efdf9e2cdb1ace sun4i_hdmi_audio.c, sun4i_hdmi.h, sun4i_hdmi_enc.c, Kconfig, Makefile |
The-going drv:gpu:drm:sun4i: Add HDMI audio sun4i-hdmi encoder |
| 📜 ✅ | [patches.armbian/] drv-net-stmmac-dwmac-sun8i-second-EMAC-clock-register |
(+10/-2)[1M] |
598f7c1db7dcd131f8b2b4ef166e94d020c2453d dwmac-sun8i.c |
Andre Przywara drv:net:stmmac:dwmac-sun8i: second EMAC clock register |
| 📜 ✅ | [patches.armbian/] drv-phy-sun4i-usb-Allow-reset-line-to-be-shared |
(+1/-1)[1M] |
b744ab2f7064dcec162448e4b86ac0f0bd75288b phy-sun4i-usb.c |
Andre Przywara drv:phy: sun4i-usb: Allow reset line to be shared |
| 📜 ✅ | [patches.armbian/] drv-iio-adc-sun4i-gpadc-iio-rename-A33-specified-registers-to-c |
(+4/-4)[2M] |
31c9a101d4339d4cf4e3052e38641cf595e48500 sun4i-gpadc.h, sun4i-gpadc-iio.c |
Icenowy Zheng drv:iio:adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33 |
| 📜 ✅ | [patches.armbian/] drv-iio-adc-sun4i-gpadc-iio-sampling-start-end-code-readout-reg |
(+94/-12)[2M] |
e34773c527ed3432a7e0165e00b1fab6b027fe6c sun4i-gpadc-iio.c, sun4i-gpadc.h |
Philipp Rossak drv:iio:adc: sun4i-gpadc-iio: sampling start/end code readout reg rework |
| 📜 ✅ | [patches.armbian/] drv-iio-adc-sun4i-gpadc-iio-support-clocks-and-reset |
(+80/-0)[1M] |
c134358070719d261880ad84e4a5fba7e2017cad sun4i-gpadc-iio.c |
Philipp Rossak drv:iio:adc: sun4i-gpadc-iio: support clocks and reset |
| 📜 ✅ | [patches.armbian/] drv-iio-adc-sun4i-gpadc-iio-multible-sensors-support |
(+29/-10)[2M] |
66f52c559fae4d63f6d107c42c37a5f65a69edcb sun4i-gpadc-iio.c, sun4i-gpadc.h |
Philipp Rossak drv:iio:adc:sun4i-gpadc-iio: multible sensors support |
| 📜 ✅ | [patches.armbian/] drv-iio-adc-sun4i-gpadc-iio-support-nvmem-calibration-data |
(+54/-0)[2M] |
58966abed022b9ed2d5628d544c77e8f13f0be21 sun4i-gpadc-iio.c, sun4i-gpadc.h |
Philipp Rossak drv:iio:adc:sun4i-gpadc-iio: support nvmem calibration data |
| 📜 ✅ | [patches.armbian/] drv-iio-adc-sun4i-gpadc-iio-add-interrupt-support |
(+95/-6)[2M] |
c64037076597c25f8193c09633e083c7f325a0fc sun4i-gpadc-iio.c, sun4i-gpadc.h |
Philipp Rossak drv:iio:adc:sun4i-gpadc-iio: add interrupt support |
| 📜 ✅ | [patches.armbian/] drv-iio-adc-sun4i-gpadc-iio-add-H3-thermal-sensor |
(+29/-0)[1M] |
51ec87516d7a589f07e8f4c650546ce3e5920963 sun4i-gpadc-iio.c |
Philipp Rossak drv:iio:adc: sun4i-gpadc-iio: add H3 thermal sensor |
| 📜 ✅ | [patches.armbian/] drv-iio-adc-sun4i-gpadc-iio-add-A83T-thermal-sensor |
(+38/-0)[1M] |
b4fe54dfb3bb8d25d527bdb04aadf9bff8d60fc1 sun4i-gpadc-iio.c |
Philipp Rossak drv:iio:adc:sun4i-gpadc-iio: add A83T thermal sensor |
| 📜 ✅ | [patches.armbian/] drv-iio-adc-Kconfig-enable-A80-A64-H5-for-THS |
(+1/-1)[1M] |
26718cf47c48d57673390e5a6faa3b08d8c80cab Kconfig |
Philipp Rossak drv:iio:adc: Kconfig: enable A80,A64,H5 for THS |
| 📜 ✅ | [patches.armbian/] drv-iio-adc-sun4i-gpadc-iio-add-A80-thermal-sensor |
(+46/-0)[1M] |
babe70f49e1e31d42973aec7d3102d942866ed8d sun4i-gpadc-iio.c |
Philipp Rossak drv:iio:adc:sun4i-gpadc-iio: add A80 thermal sensor |
| 📜 ✅ | [patches.armbian/] drv-iio-adc-sun4i-gpadc-iio-add-A64-thermal-sensor |
(+50/-0)[1M] |
c207ec973d2f98fddf643baf967592545f85b367 sun4i-gpadc-iio.c |
Philipp Rossak drv:iio: adc: sun4i-gpadc-iio: add A64 thermal sensor |
| 📜 ✅ | [patches.armbian/] drv-iio-sun4i-gpadc-iio-don-t-force-poweroff |
(+6/-0)[1M] |
d03e88f8e11cd9998e94a84619b8efb60ea9cf75 sun4i-gpadc-iio.c |
Vasily Khoruzhick drv:iio:sun4i-gpadc-iio: don`t force poweroff |
| 📜 ✅ | [patches.armbian/] drv-staging-media-sunxi-cedrus-add-H616-variant |
(+13/-0)[1M] |
637c461e39ce3d3722be958a432e69b352f443f0 cedrus.c |
Jernej Skrabec drv:staging:media:sunxi:cedrus: add H616 variant |
| 📜 ✅ | [patches.armbian/] drv-soc-sunxi-sram-Add-SRAM-C1-H616-handling |
(+10/-0)[1M] |
8f3ef3ceecf7e4cec1eb3327ca6f85fa3a9b2031 sunxi_sram.c |
Jernej Skrabec drv:soc: sunxi: sram: Add SRAM C1 H616 handling |
| 📜 ✅ | [patches.armbian/] drv-media-dvb-frontends-si2168-fix-cmd-timeout |
(+1/-1)[1M] |
357348415ccf434034581f0c8761f7a70f1f08dc si2168.c |
Koumes drv:media:dvb-frontends:si2168: fix cmd timeout |
| 📜 ✅ | [patches.armbian/] include-uapi-drm_fourcc-add-ARM-tiled-format-modifier |
(+9/-0)[1M] |
9d3c3c2c813778db4c3f12ff211ce10bae9f1e95 drm_fourcc.h |
Qiang Yu include:uapi:drm_fourcc: add ARM tiled format modifier |
| 📜 ✅ | [patches.armbian/] drv-clk-sunxi-ng-ccu-add-min-max-rate-sun50i-a64 |
(+10/-0)[3M] |
a2dbdeed4ee91577a3fa4a2461d02f293f30029a ccu_nkm.c, ccu_nkm.h, ccu-sun50i-a64.c |
Vasily Khoruzhick drv:clk:sunxi-ng: ccu: add min/max rate sun50i-a64 |
| 📜 ✅ | [patches.armbian/] drv-clocksource-arm_arch_timer-fix-a64-timejump |
(+14/-11)[1M] |
1672eeda0ea7b496d36c85cf7f9c11f20f939836 arm_arch_timer.c |
The-going drv:clocksource:arm_arch_timer fix a64 timejump |
| 📜 ✅ | [patches.armbian/] sound-soc-sunxi-sun4i-spdif-add-mclk_multiplier |
(+7/-0)[1M] |
4685f2dd886fc6ec6a986ebf5a51f88164664ee0 sun4i-spdif.c |
The-going sound:soc:sunxi:sun4i-spdif add mclk_multiplier |
| 📜 ✅ | [patches.armbian/] sound-soc-sunxi-sun8i-codec-analog-enable-sound |
(+6/-2)[1M] |
83726036c893c90d3007d1ccb54535ed544727a2 sun8i-codec-analog.c |
The-going sound:soc:sunxi:sun8i-codec-analog enable sound |
| 📜 ✅ | [patches.armbian/] sound-soc-sunxi-Provoke-the-early-load-of-sun8i-codec-analog |
(+1/-1)[1M] |
02af9339476529201832745822148792f2d4f670 Makefile |
wuweidong sound:soc:sunxi: Provoke the early load of sun8i-codec-analog |
| 📜 ✅ | [patches.armbian/] sound-soc-sunxi-sun4i-codec-adcis-select-capture-source |
(+47/-4)[1M] |
72e6255f8b0a8bb86fc488d5f68f5133ee87757f sun4i-codec.c |
The-going sound:soc:sunxi:sun4i-codec adcis select capture source |
| 📜 ✅ | [patches.armbian/] drv-mmc-host-sunxi-mmc-add-h5-emmc-compatible |
(+8/-0)[1M] |
8b30c18b50fd457aa0a5e17d4c0d972b07f9652d sunxi-mmc.c |
The-going drv:mmc:host:sunxi-mmc: add h5 emmc compatible |
| 📜 ✅ | [patches.armbian/] drv-pinctrl-sunxi-pinctrl-sun50i-h6.c-GPIO-disable_strict_mode |
(+1/-0)[1M] |
76e4ace1ea3505d6ab2ea9f8ee7bd8d558458139 pinctrl-sun50i-h6.c |
The-going drv:pinctrl:sunxi:pinctrl-sun50i-h6.c GPIO disable_strict_mode |
📜 [needs_rebase] |
[patches.armbian/] drv-gpu-drm-sun4i-sun8i_mixer.c-add-h3-mixer1 |
(+12/-0)[1M] |
5d8b02100deec4f24bb22cbd7469e6141e8f3673 sun8i_mixer.c |
The-going drv:gpu:drm:sun4i:sun8i_mixer.c add h3 mixer1 |
| 📜 ✅ | [patches.armbian/] drv-mtd-nand-raw-nand_ids.c-add-H27UBG8T2BTR-BC-nand |
(+4/-0)[1M] |
de8de5a13a59babb221ab85ab7555d2a782cd810 nand_ids.c |
The-going drv:mtd:nand:raw:nand_ids.c add H27UBG8T2BTR-BC nand |
| 📜 ✅ | [patches.armbian/] drv-mfd-axp20x-add-sysfs-interface |
(+614/-0)[1M] |
1e2a71ce903aa472cb845e3364d04bff295760e7 axp20x.c |
The-going drv:mfd:axp20x add sysfs interface |
| 📜 ✅ | [patches.armbian/] drv-spi-spidev-Add-armbian-spi-dev-compatible |
(+3/-0)[1M] |
c74e4d3f5e1b4df863a3bffd65e6b835d5d024d6 spidev.c |
The-going drv:spi:spidev Add armbian spi-dev compatible |
| 📜 ✅ | [patches.armbian/] drv-spi-spi-sun4i.c-spi-bug-low-on-sck |
(+3/-1)[1M] |
0a2076ded3c5743fb6837f8cdae69dff94a4eedc spi-sun4i.c |
The-going drv:spi:spi-sun4i.c spi bug low on sck |
| 📜 ✅ | [patches.armbian/] drv-rtc-sun6i-Add-Allwinner-H616-support |
(+16/-0)[1M] |
63cc13f9a68b0f4ff10ec401969c3d17fce391db rtc-sun6i.c |
Andre Przywara drv:rtc: sun6i: Add Allwinner H616 support |
| 📜 ✅ | [patches.armbian/] drv-nvmem-sunxi_sid-Support-SID-on-H616 |
(+7/-0)[1M] |
d9c4985821bfb8e9802fef23bf4da69ce31fdad0 sunxi_sid.c |
Kali Prasad drv:nvmem:sunxi_sid: Support SID on H616 |
| 📜 ✅ | [patches.armbian/] drv-thermal-sun8i_thermal-Add-for-H616 |
(+102/-0)[1M] |
e5b3af52870c53b507e4077d291bcd2666165a80 sun8i_thermal.c |
Kali Prasad drv:thermal:sun8i_thermal Add for H616 |
| 📜 ✅ | [patches.armbian/] drv-iio-adc-axp20x_adc-arm64-dts-axp803-hwmon-enable-thermal |
(+89/-0)[2M] |
9b4d71b0ea79bf66c8933c0d9db11eadc14bed9b axp20x_adc.c, axp803.dtsi |
Mitko Gamishev drv:iio:adc:axp20x_adc arm64:dts:axp803 hwmon enable thermal |
📜 [needs_rebase] |
[patches.armbian/] drv-gpu-drm-panel-simple-Add-compability-olinuxino-lcd |
(+122/-4)[1M] |
6e02eb9208dc996d3ad48beabb1cf69402db9f92 panel-simple.c |
The-going drv:gpu:drm: panel-simple Add compability olinuxino lcd |
| 📜 ✅ | [patches.armbian/] drv-input-touchscreen-sun4i-ts-Enable-parsing |
(+15/-4)[1M] |
f8fc0efb9974d1440107d3039fd4a90cd1d1ab26 sun4i-ts.c |
Mitko Gamishev drv:input:touchscreen:sun4i-ts Enable parsing |
| 📜 ✅ | [patches.armbian/] drv-mmc-host-sunxi-mmc-Disable-DDR52-mode-on-all-A20-based-boar |
(+3/-1)[1M] |
c9b2de6649116d3d1b450f67a2a7419842679535 sunxi-mmc.c |
Mitko Gamishev drv:mmc:host:sunxi-mmc Disable DDR52 mode on all A20 based boards |
| 📜 ✅ | [patches.armbian/] drv-usb-gadget-composite-rename-gadget-serial-console-manufactu |
(+1/-1)[1M] |
3fb961e3013e2ac3c7a0af3f9af55073366c08b5 composite.c |
The-going drv:usb:gadget:composite rename gadget serial console manufacturer |
| 📜 ✅ | [patches.armbian/] arm-arm64-dts-Add-leds-axp20x-charger |
(+20/-0)[4M] |
3dc1c9efce072baac3b61842c13e5e6b01910471 axp209.dtsi, axp22x.dtsi, axp81x.dtsi, axp803.dtsi |
The-going arm:arm64:dts: Add leds axp20x charger |
| 📜 ✅ | [patches.armbian/] arm-dts-sun9i-a80-add-thermal-sensor |
(+11/-0)[1M] |
78b24f19d8dcf8d18aa48648dae6aeb5f04e4d91 sun9i-a80.dtsi |
Philipp Rossak arm:dts: sun9i-a80 add thermal sensor |
| 📜 ✅ | [patches.armbian/] arm-dts-sun9i-a80-add-thermal-zone |
(+26/-0)[1M] |
5ab39ebe47ede829768c84a147e9eac1d903ab9c sun9i-a80.dtsi |
Philipp Rossak arm:dts: sun9i-a80 add thermal zone |
| 📜 ✅ | [patches.armbian/] arm-dts-sun7i-a20-Disable-OOB-IRQ-for-brcm-wifi-on-Cubietruck-a |
(+26/-6)[2M] |
85b968101323c3702f8825f238122f55f9ab0727 sun7i-a20-bananapro.dts, sun7i-a20-cubietruck.dts |
The-going arm:dts:sun7i-a20 Disable OOB IRQ for brcm-wifi on Cubietruck and Banana-Pro |
| 📜 ✅ | [patches.armbian/] arm-dts-a20-orangepi-and-mini-fix-phy-mode-hdmi |
(+31/-2)[2M] |
afef1e082024f80e4069b8822bbb6960ab5f8db9 sun7i-a20-orangepi.dts, sun7i-a20-orangepi-mini.dts |
The-going arm:dts: a20-orangepi and mini fix phy-mode, hdmi |
| 📜 ✅ | [patches.armbian/] arm-dts-sun8i-h3-nanopi-add-leds-pio-pins |
(+23/-0)[1M] |
c4acb9350c1b23875d80f265d76504126b26cb08 sun8i-h3-nanopi.dtsi |
The-going arm:dts: sun8i-h3-nanopi add leds pio pins |
| 📜 ✅ | [patches.armbian/] arm-dts-a10-cubiebord-a20-cubietruck-green-LED-mmc0-default-tri |
(+2/-1)[2M] |
9ec80e78eeb13d9cd52f6f01f58df56d6bde196a sun4i-a10-cubieboard.dts, sun7i-a20-cubietruck.dts |
The-going arm:dts: a10-cubiebord a20-cubietruck green LED mmc0 default-trigger |
| 📜 ✅ | [patches.armbian/] arm-dts-Add-sun8i-h2-plus-nanopi-duo-device |
(+165/-0)[1M, 1A] |
b9cf046f1d1ada45147ad801ebe7e6d0938dc518 sun8i-h2-plus-nanopi-duo.dts, Makefile |
The-going arm:dts: Add sun8i-h2-plus-nanopi-duo device |
| 📜 ✅ | [patches.armbian/] arm-dts-Add-sun8i-h2-plus-sunvell-r69-device |
(+226/-0)[1M, 1A] |
180919229dd85c88a532d9bba6a1512c9439bfdf sun8i-h2-plus-sunvell-r69.dts, Makefile |
The-going arm:dts: Add sun8i-h2-plus-sunvell-r69 device |
| 📜 ✅ | [patches.armbian/] arm-dts-h3-nanopi-neo-Add-regulator-leds-mmc2 |
(+57/-0)[1M] |
27a126a8329585ec26ac0d7b9c44d9ce67a14a72 sun8i-h3-nanopi-neo.dts |
The-going arm:dts: h3-nanopi-neo Add regulator, leds, mmc2 |
| 📜 ✅ | [patches.armbian/] arm-dts-h3-nanopi-neo-air-Add-regulator-camera-wifi-bluetooth-o |
(+153/-0)[1M] |
346759eb3dfa120fd4abd48e041f698182acedeb sun8i-h3-nanopi-neo-air.dts |
The-going arm:dts: h3-nanopi-neo-air Add regulator camera wifi bluetooth otg |
| 📜 ✅ | [patches.armbian/] arm-dts-h3-orangepi-2-Add-regulator-vdd-cpu |
(+29/-0)[1M] |
651dca80581530cd7573aa2624eda642c3a62faf sun8i-h3-orangepi-2.dts |
The-going arm:dts: h3-orangepi-2 Add regulator vdd cpu |
| 📜 ✅ | [patches.armbian/] arm-dts-sun8i-r40-bananapi-m2-ultra-add-codec-analog |
(+28/-0)[2M] |
6a6373c5c4506d51924042e3be6e23dc16388d2e sun8i-r40.dtsi, sun8i-r40-bananapi-m2-ultra.dts |
The-going arm:dts: sun8i-r40 bananapi-m2-ultra add codec analog |
| 📜 ✅ | [patches.armbian/] arm-dts-sun7i-a20-cubietruck-add-alias-uart2 |
(+1/-0)[1M] |
71d8236718f14822182a1bcbb89ba6e0e583b8f4 sun7i-a20-cubietruck.dts |
The-going arm:dts: sun7i-a20-cubietruck add alias uart2 |
| 📜 ✅ | [patches.armbian/] arm-dts-sun8i-v3s-s3-pinecube-enable-sound-codec |
(+28/-0)[2M] |
93bd0ee2c132f2388e0c5f28460bf88599e0a90e sun8i-s3-pinecube.dts, sun8i-v3s.dtsi |
The-going arm:dts: sun8i-v3s/s3-pinecube enable sound codec |
| 📜 ✅ | [patches.armbian/] arm-dts-sun8i-r40-add-clk_out_a-fix-bananam2ultra |
(+17/-0)[1M] |
751bbe166244ba109c3bd6c4c16c2ba3125c041c sun8i-r40.dtsi |
The-going arm:dts: sun8i-r40 add clk_out_a fix bananam2ultra |
| 📜 ✅ | [patches.armbian/] arm-dts-sun8i-h3-bananapi-m2-plus-add-wifi_pwrseq |
(+5/-0)[1M] |
4b034811699639056a41da7d6dd2c0192db8a0d2 sun8i-h3-bananapi-m2-plus.dts |
The-going arm:dts:sun8i-h3-bananapi-m2-plus add wifi_pwrseq |
| 📜 ✅ | [patches.armbian/] arm-dts-sun7i-a20-bananapro-add-hdmi-connector-de |
(+30/-0)[1M] |
3bd0571f45f091400cb89a5b08d7e9f5ab6ee718 sun7i-a20-bananapro.dts |
The-going arm:dts: sun7i-a20-bananapro add hdmi-connector, de |
| 📜 ✅ | [patches.armbian/] Bananapro-add-AXP209-regulators |
(+50/-0)[1M] |
178029c86b9e549114714423a807456d21f00cc6 sun7i-a20-bananapro.dts |
The-going Bananapro add AXP209 regulators |
| 📜 ✅ | [patches.armbian/] arm-dts-sunxi-h3-h5.dtsi-force-mmc0-bus-width |
(+1/-0)[1M] |
66d5ebc88f5f602c9581f1d1ad9b2f639969aad9 sunxi-h3-h5.dtsi |
The-going arm:dts: sunxi-h3-h5.dtsi force mmc0 bus-width |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-a64-pine64-enable-wifi-mmc1 |
(+16/-0)[1M] |
532401d5fa2f2f74fa4f79a2e739185296c62b25 sun50i-a64-pine64.dts |
Icenowy Zheng arm64:dts: sun50i-a64-pine64 enable wifi mmc1 |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-a64-sopine-baseboard-Add-i2s2-mmc1 |
(+14/-0)[1M] |
d4bceeb491d636d904a81d99693e6abc3d3d7310 sun50i-a64-sopine-baseboard.dts |
Vasily Khoruzhick arm64:dts: sun50i-a64-sopine-baseboard Add i2s2 mmc1 |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h6-Add-r_uart-uart2-3-pins |
(+50/-10)[1M] |
1ed9e14cfb6fa4c33d529d3f785eabd00be7f0c5 sun50i-h6.dtsi |
The-going arm64:dts: sun50i-h6 Add r_uart uart2-3 pins |
| 📜 ✅ | [patches.armbian/] arm64-dts-allwiner-sun50i-h616.dtsi-add-usb-ehci-ohc |
(+9/-2)[1M] |
5dc9dd9ae1c7fac4eaf1d0caf6bfb3b8c37c64f5 sun50i-h616.dtsi |
The-going arm64: dts: allwiner: sun50i-h616.dtsi: add usb,ehci,ohci |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h616-orangepi-zero2-reg_usb1_vbus-status-ok |
(+1/-0)[1M] |
2f49e8c4d4b70970eb9f0e3abf71f147bacc3145 sun50i-h616-orangepi-zero.dtsi |
The-going arm64: dts: sun50i-h616-orangepi-zero2: reg_usb1_vbus status ok |
| 📜 ✅ | [patches.armbian/] arm64-dts-allwinner-sun50i-h616-Add-GPU-node |
(+14/-0)[1M] |
c3eec7f954426d28ce1aa0ba6a7f4a491c89a298 sun50i-h616.dtsi |
Jernej Skrabec arm64:dts: allwinner: sun50i-h616 Add GPU node |
📜 [needs_rebase] |
[patches.armbian/] arm64-dts-sun50i-h616-orangepi-zero2-Enable-GPU-mali |
(+5/-0)[1M] |
4d4fb61901b26000f5edb1dd0556a1159a1bf951 sun50i-h616-orangepi-zero2.dts |
Jernej Skrabec arm64:dts: sun50i-h616-orangepi-zero2 Enable GPU mali |
| 📜 ✅ | [patches.armbian/] arm64-dts-allwinner-sun50i-h616-Add-VPU-node |
(+24/-0)[1M] |
c697e504c906252af62fdb6f198d342b0e8cc431 sun50i-h616.dtsi |
Jernej Skrabec arm64:dts:allwinner: sun50i-h616 Add VPU node |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h616-x96-mate-T95-eth-sd-card-hack |
(+46/-1)[2M] |
2a21af5b9de0212e8c9e40caceaaeb9b1e40ed4a sun50i-h616.dtsi, sun50i-h616-x96-mate.dts |
Jernej Skrabec arm64:dts: sun50i-h616-x96-mate T95 eth & sd card hack |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h616-x96-mate-add-hdmi |
(+26/-0)[1M] |
2010afa19ea5aece09accf3431d949bf4b3033be sun50i-h616-x96-mate.dts |
Jernej Skrabec arm64:dts: sun50i-h616-x96-mate add hdmi |
| 📜 ✅ | [patches.armbian/] arm64-dts-allwinner-h616-Add-device-node-for-SID |
(+15/-0)[1M] |
cf9268f25fd677625f97804e8845690896a8fa8f sun50i-h616.dtsi |
Kali Prasad arm64: dts: allwinner: h616: Add device node for SID |
📜 [needs_rebase] |
[patches.armbian/] arm64-dts-allwinner-h616-Add-efuse_xlate-cpu-frequency-scaling-v1_6_2 |
(+156/-24)[5M, 1A] |
44b1a198abeca16c91b33f424dfb593655dbb841 sun50i-cpufreq-nvmem.c, sun50i-h616-cpu-opp.dtsi, sun50i-h616-orangepi-zero2.dts, sun50i-h618-orangepi-zero3.dts, cpufreq-dt-platdev.c, sun50i-h616-orangepi-zero.dtsi |
AGM1968 arm64-dts-allwinner-h616-Add-efuse_xlate-cpu-frequency-scaling-v1_6_2 arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts drivers/cpufreq/cpufreq-dt-platdev.c drivers/cpufreq/sun50i-cpufreq-nvmem.c |
| 📜 ✅ | [patches.armbian/] arm64-dts-allwinner-h616-Add-thermal-sensor-and-thermal-zones |
(+75/-0)[1M] |
fda2ebbbb03122924644b2c46a33e00e73329111 sun50i-h616.dtsi |
Kali Prasad arm64: dts: allwinner: h616: Add thermal sensor and thermal zones |
| 📜 ✅ | [patches.armbian/] arm64-dts-allwinner-h616-Fix-thermal-zones-missing-trips |
(+29/-0)[1M] |
b7021f0cfe4f8314856e053c00f4a904aa10c5d2 sun50i-h616.dtsi |
=?UTF-8?q?Micha=C5=82=20Dzieko=C5=84ski?= arm64: dts: allwinner: h616: Fix thermal zones (add missing trips) |
| 📜 ✅ | [patches.armbian/] drv-staging-fbtft-add-st7796s |
(+111/-0)[2M, 1A] |
975ec01620f7e05dd1f54ba180ab071fd4e49661 fb_st7796s.c, Kconfig, Makefile |
Alan Add: FB_TFT ST7796S driver |
| 📜 ✅ | [patches.armbian/] drv-touchscreen-tsc2007-polling |
(+108/-8)[2M] |
3eb2d5ffa7d806acbc97bf735fdc94ade9d15ae3 tsc2007_core.c, tsc2007.h |
Alan Optimize: TSC2007 touchscreen add polling method |
| 📜 ✅ | [patches.armbian/] drv-rgb-add-ws2812 |
(+237/-0)[2M, 1A] |
fc8dbb1d5ea83fe46c76f3d500e99581df3144fb leds-ws2812.c, Kconfig, Makefile |
Alan Add: ws2812 RGB driver for allwinner H616 |
📜 [needs_rebase] |
[patches.armbian/] arm64-dts-allwinner-h616-LED-green_power_on-red_status_heartbeat |
(+4/-3)[1M] |
ad4e090bb47fb4c372d8d7944d015ae81a73c0e8 sun50i-h616-orangepi-zero.dtsi |
AGM1968 LED-green_power_on-red_status_heartbeat arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi |
📜 [needs_rebase] |
[patches.armbian/] arm64-dts-allwinner-h616-orangepi-zero2-Enable-expansion-board-USB-ports |
(+15/-0)[1M] |
c08de43089d350acc7a64bed9dca881d3ac42689 sun50i-h616-orangepi-zero.dtsi |
=?UTF-8?q?Micha=C5=82=20Dzieko=C5=84ski?= arm64: dts: allwinner: h616 orangepi zero2: Enable expansion board USB ports |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-a64-pine64-enable-Bluetooth |
(+9/-1)[1M] |
1ffae1c29b63d7cde364e33b08f94cbbdcb58289 sun50i-a64-pine64.dts |
Vasily Khoruzhick arm64:dts: sun50i-a64-pine64 enable Bluetooth |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-a64-sopine-baseboard-enable-Bluetooth |
(+14/-0)[1M] |
9a69f4f4f85220ff4975e21fa19bee5e1607c44f sun50i-a64-sopine-baseboard.dts |
Vasily Khoruzhick arm64:dts: sun50i-a64-sopine-baseboard enable Bluetooth |
| 📜 ✅ | [patches.armbian/] arm64-dts-nanopi-a64-set-right-phy-mode-to-rgmii-id |
(+1/-1)[1M] |
166a3a3d99b02c08c15e2078f5ed730753b8623c sun50i-a64-nanopi-a64.dts |
root arm64:dts: nanopi-a64 set right phy-mode to rgmii-id |
| 📜 ✅ | [patches.armbian/] arm64-dts-FIXME-a64-olinuxino-add-regulator-audio-mmc |
(+46/-0)[1M] |
4c1e21ac1fb135688254a99405c460c7d6bde468 sun50i-a64-olinuxino.dts |
The-going arm64:dts: FIXME: a64-olinuxino add regulator audio mmc |
| 📜 ✅ | [patches.armbian/] arm64-dts-Add-sun50i-h5-nanopi-k1-plus-device |
(+397/-0)[1M, 1A] |
395b4a3d4a2f4856660257cbf2d8fde54576972d sun50i-h5-nanopi-k1-plus.dts, Makefile |
wuweidong arm64:dts: Add sun50i-h5-nanopi-k1-plus device |
| 📜 ✅ | [patches.armbian/] arm64-dts-Add-sun50i-h5-nanopi-neo-core2-device |
(+211/-0)[1M, 1A] |
add01ebd7f81ed192856f72697adaa6e71843330 sun50i-h5-nanopi-neo-core2.dts, Makefile |
The-going arm64:dts: Add sun50i-h5-nanopi-neo-core2 device |
| 📜 ✅ | [patches.armbian/] arm64-dts-Add-sun50i-h5-nanopi-neo2-v1.1-device |
(+181/-0)[1M, 1A] |
ed1f28734cc817f7fc95795cfa0ccba326416090 sun50i-h5-nanopi-neo2-v1.1.dts, Makefile |
The-going arm64:dts: Add sun50i-h5-nanopi-neo2-v1.1 device |
| 📜 ✅ | [patches.armbian/] arm64-dts-Add-sun50i-h5-nanopi-m1-plus2-device |
(+241/-0)[1M, 1A] |
f97f17d1efe09b4999bb13eb7047e41ede446d91 sun50i-h5-nanopi-m1-plus2.dts, Makefile |
The-going arm64:dts: Add sun50i-h5-nanopi-m1-plus2 device |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h5-nanopi-neo2-add-regulator-led-triger |
(+22/-1)[1M] |
9ec8047be8e72965fde79eb362f2d20f5c4a7f51 sun50i-h5-nanopi-neo2.dts |
The-going arm64:dts: sun50i-h5-nanopi-neo2 add regulator, led triger |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h5-orangepi-pc2-add-spi-flash |
(+19/-6)[1M] |
311b9da2e03a2ffbc5e162308d193b25db4610c0 sun50i-h5-orangepi-pc2.dts |
The-going arm64:dts: sun50i-h5-orangepi-pc2 add spi flash |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h5-orangepi-prime-add-regulator |
(+36/-7)[1M] |
da3f122a540da742a5ba31bfebf7f69d0f42634d sun50i-h5-orangepi-prime.dts |
The-going arm64:dts: sun50i-h5-orangepi-prime add regulator |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h5-orangepi-zero-plus-add-regulator |
(+24/-1)[1M] |
14c494b09e276107b71dd315b305f8fbccdccf9a sun50i-h5-orangepi-zero-plus.dts |
The-going arm64:dts: sun50i-h5-orangepi-zero-plus add regulator |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h5-orangepi-zero-plus2-regulator-gpio-fix |
(+45/-13)[1M] |
6218945372c5b411f95647770005aad5d58111da sun50i-h5-orangepi-zero-plus2.dts |
The-going arm64:dts: sun50i-h5-orangepi-zero-plus2 regulator-gpio fix |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h6.dtsi-improve-thermals |
(+55/-13)[1M] |
1fcac29780c9f9fc5c6ee839bc5aa514ea5dcb53 sun50i-h6.dtsi |
The-going arm64:dts: sun50i-h6.dtsi improve thermals |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h6-orangepi-3-delete-node-spi0 |
(+2/-0)[1M] |
96080ab653268b9046cc63465ec2a5e3097ed70f sun50i-h6-orangepi-3.dts |
The-going arm64:dts: sun50i-h6-orangepi-3 delete-node &spi0 |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h6-orangepi-lite2-spi0-usb3phy-dwc3-enable |
(+26/-0)[1M] |
1a8a3a0a819a924e8eb1b97225fd167cb7beab57 sun50i-h6-orangepi-lite2.dts |
Igor Pecovnik arm64:dts: sun50i-h6-orangepi-lite2 spi0, usb3phy, dwc3 enable |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h6-pine-h64-add-wifi-rtl8723cs |
(+38/-0)[1M] |
1ec5d6712ab076c3f131201ab0619dff3b484b0b sun50i-h6-pine-h64.dts |
The-going arm64:dts: sun50i-h6-pine-h64 add wifi rtl8723cs |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h6-pine-h64-add-dwc3-usb3phy |
(+9/-0)[1M] |
bb1a75ef4cd60c931cecacd298f8e60e3b3d349e sun50i-h6-pine-h64.dts |
The-going arm64:dts: sun50i-h6-pine-h64 add dwc3 usb3phy |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-a64-pine64-add-spi0 |
(+29/-0)[1M] |
c380ee156963c966a96252585842a2bf968b3a7d sun50i-a64-pine64.dts |
The-going arm64:dts: sun50i-a64-pine64 add spi0 |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h6.dtsi-add-pinctrl-pins-for-spi |
(+4/-0)[1M] |
53c90fde208086b62cf94c8dd7abdc5756045f6c sun50i-h6.dtsi |
The-going arm64:dts: sun50i-h6.dtsi add pinctrl pins for spi |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-a64-orangepi-win-add-aliase-ethernet1 |
(+1/-0)[1M] |
fcc2e7d4afbbe1d2060c5a29b90de7b95655edcd sun50i-a64-orangepi-win.dts |
The-going arm64:dts: sun50i-a64-orangepi-win add aliase ethernet1 |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-a64-force-mmc0-bus-width |
(+1/-0)[1M] |
252b7d5d0ee119c2555241fae088459a22cf3708 sun50i-a64.dtsi |
The-going arm64:dts: sun50i-a64 force mmc0 bus-width |
| 📜 ✅ | [patches.armbian/] drv-of-Device-Tree-Overlay-ConfigFS-interface |
(+287/-1)[3M, 1A] |
be70160a4e66c97008394c985ae5dd4ac0ed2692 configfs.c, Kconfig, fdt_address.c, Makefile |
The-going drv:of: Device Tree Overlay ConfigFS interface |
| 📜 ✅ | [patches.armbian/] scripts-add-overlay-compilation-support |
(+24/-2)[3M] |
a7b74991a3dab8a156df09c60c2083c47c61c4a0 Makefile.dtbinst, Makefile.lib, .gitignore |
The-going scripts: add overlay compilation support |
| 📜 ✅ | [patches.armbian/] scripts-enable-kernel-dtbs-symbol-generation |
(+2/-1)[1M] |
efdefdba30e8ec9821152019b7d82e6c69cb1aba Makefile.lib |
The-going scripts: enable kernel dtbs symbol generation |
| 📜 ✅ | [patches.armbian/] Makefile-CONFIG_SHELL-fix-for-builddeb-packaging |
(+3/-1)[1M] |
f0cefe84fbebd44082add42265e8f2be834f00cc Makefile |
The-going Makefile: CONFIG_SHELL fix for builddeb packaging |
| 📜 ✅ | [patches.armbian/] arm-dts-overlay-Add-Overlays-for-sunxi |
(+4176/-0)[1M, 96A] |
02a5fb1b433bf1a4d76899c00084f65d3c221c6d README.sun7i-a20-overlays, README.sun4i-a10-overlays, README.sun8i-h3-overlays, README.sun5i-a13-overlays, sun7i-a20-fixup.scr-cmd, sun4i-a10-fixup.scr-cmd, sun8i-h3-fixup.scr-cmd, sun4i-a10-nand.dtso, sun7i-a20-nand.dtso, Makefile, sun5i-a13-nand.dtso, sun4i-a10-spi-jedec-nor.dtso, sun4i-a10-spi-spidev.dtso, sun5i-a13-spi-jedec-nor.dtso, sun5i-a13-spi-spidev.dtso, and 81 more |
The-going arm:dts:overlay Add Overlays for sunxi |
| 📜 ✅ | [patches.armbian/] arm64-dts-allwinner-overlay-Add-Overlays-for-sunxi64 |
(+2067/-0)[1M, 48A] |
2fc4b663a1a4d262a23c320526a074a8656b9d1f README.sun50i-h5-overlays, README.sun50i-a64-overlays, sun50i-h5-fixup.scr-cmd, sun50i-h6-fixup.scr-cmd, sun50i-a64-fixup.scr-cmd, Makefile, sun50i-a64-spi-spidev.dtso, sun50i-h5-spi-jedec-nor.dtso, sun50i-h5-spi-spidev.dtso, sun50i-h6-spi-jedec-nor.dtso, sun50i-h6-spi-spidev.dtso, sun50i-a64-spi-add-cs1.dtso, sun50i-h5-spi-add-cs1.dtso, sun50i-h6-spi-add-cs1.dtso, sun50i-h5-pwm.dtso, and 33 more |
The-going arm64:dts:allwinner:overlay: Add Overlays for sunxi64 |
| 📜 ✅ | [patches.armbian/] arm-dts-overlay-sun8i-h3-cpu-clock-add-overclock |
(+162/-0)[1M, 3A] |
2d364b1f45c4506b0197567b2320c3f41780dfa3 sun8i-h3-cpu-clock-1.368GHz-1.3v.dtso, sun8i-h3-cpu-clock-1.3GHz-1.3v.dtso, sun8i-h3-cpu-clock-1.2GHz-1.3v.dtso, Makefile |
The-going arm:dts:overlay: sun8i-h3-cpu-clock add overclock |
| 📜 ✅ | [patches.armbian/] arm64-dts-overlay-sun50i-a64-pine64-7inch-lcd |
(+93/-0)[2M, 1A] |
8e03ad0d141343a476380ba6211d3bf566f9216a sun50i-a64-pine64-7inch-lcd.dtso, README.sun50i-a64-overlays, Makefile |
The-going arm64:dts:overlay: sun50i-a64-pine64-7inch-lcd |
| 📜 ✅ | [patches.armbian/] arm64-dts-overlay-sun50i-h5-add-gpio-regulator-overclock |
(+165/-0)[1M, 4A] |
00761190b2f0acc96e63e869a29d6d1e3fa44146 sun50i-h5-cpu-clock-1.3GHz-1.3v.dtso, sun50i-h5-gpio-regulator-1.3v.dtso, sun50i-h5-cpu-clock-1.0GHz-1.1v.dtso, sun50i-h5-cpu-clock-1.2GHz-1.3v.dtso, Makefile |
The-going arm64:dts:overlay sun50i-h5 add gpio regulator overclock |
| 📜 ✅ | [patches.armbian/] Move-sun50i-h6-pwm-settings-to-its-own-overlay |
(+25/-14)[1M, 1A] |
65ab50cd17d3dec505695d85e1c4a875ed5bf132 sun50i-h6-pwm.dtso, sun50i-h6-fixup.scr-cmd |
afaulkner420 Move sun50i-h6-pwm settings to its own overlay |
| 📜 ✅ | [patches.armbian/] Compile-the-pwm-overlay |
(+1/-0)[1M] |
a57db328480be2aa587abde402d97e3722188359 Makefile |
afaulkner420 Compile the pwm overlay |
| 📜 ✅ | [patches.armbian/] arm64-dts-overlay-sun50i-h616-bigtreetech-cb1 |
(+381/-2)[1M, 11A] |
8ba2fd70bb6e29a4e521b8718add7c26a5ca75de sun50i-h616-fixup.scr-cmd, sun50i-h616-spi-spidev.dtso, sun50i-h616-tft35_spi.dtso, sun50i-h616-spidev0_0.dtso, sun50i-h616-spidev1_0.dtso, sun50i-h616-spidev1_1.dtso, sun50i-h616-spidev1_2.dtso, sun50i-h616-light.dtso, sun50i-h616-mcp2515.dtso, Makefile, sun50i-h616-ir.dtso, sun50i-h616-ws2812.dtso |
Your Name cb1-overlay |
| 📜 ✅ | [patches.armbian/] arm-dts-sunxi-h3-h5.dtsi-add-i2s0-i2s1-pins |
(+10/-0)[1M] |
38ff7ed1af3d4909c16e243163b4923f063e58ca sunxi-h3-h5.dtsi |
The-going arm:dts:sunxi-h3-h5.dtsi add i2s0 i2s1 pins |
| 📜 ✅ | [patches.armbian/] arm-dts-sun5i-a13-olinuxino-micro-add-panel-lcd-olinuxino-4.3 |
(+60/-2)[1M] |
0b1dde1f121ff74f4ab207840358cb34a390c429 sun5i-a13-olinuxino-micro.dts |
Mitko Gamishev arm:dts:sun5i-a13-olinuxino-micro add panel lcd-olinuxino-4.3 |
| 📜 ✅ | [patches.armbian/] arm-dts-sun5i-a13-olinuxino-Add-panel-lcd-olinuxino-4.3-needed- |
(+44/-35)[1M] |
75da9fb0df176552bc643d60143c8f7cedf7c45e sun5i-a13-olinuxino.dts |
hehopmajieh arm:dts:sun5i-a13-olinuxino Add panel lcd-olinuxino-4.3 needed to fix overlay tests |
| 📜 ✅ | [patches.armbian/] arm-dts-sun7i-a20-olinuxino-micro-emmc-Add-vqmmc-node |
(+1/-0)[1M] |
3c82089a06f47057266ea895a243ecca5c67b71b sun7i-a20-olinuxino-micro-emmc.dts |
hehopmajieh arm:dts:sun7i-a20-olinuxino-micro-emmc Add vqmmc node |
| 📜 ✅ | [patches.armbian/] arm-dts-sun7i-a20-olinuxino-lime2-enable-audio-codec |
(+4/-0)[1M] |
8854e1e2deea5f9d82466aff9e9e154b17c048cf sun7i-a20-olinuxino-lime2.dts |
Stefan Saraev arm:dts:sun7i-a20-olinuxino-lime2 enable audio codec |
| 📜 ✅ | [patches.armbian/] arm-dts-sun7i-a20-olinuxino-lime2-enable-ldo3-always-on |
(+1/-1)[1M] |
6801a1ef8c77a8dc3b8132289f3f2628a252e2b7 sun7i-a20-olinuxino-lime2.dts |
hehopmajieh arm:dts:sun7i-a20-olinuxino-lime2 enable ldo3 always-on |
| 📜 ✅ | [patches.armbian/] arm-dts-sun7i-a20-olimex-som-204-evb-olinuxino-micro-decrease-d |
(+3/-3)[3M] |
f7d976139aea0a258f51e266f39f080108956e9f sun7i-a20-olimex-som-evb.dts, sun7i-a20-olimex-som204-evb.dts, sun7i-a20-olinuxino-micro.dts |
Stefan Saraev arm:dts:sun7i-a20: olimex-som(204)-evb,olinuxino-micro decrease dcdc2 min voltage |
| 📜 ✅ | [patches.armbian/] arm-dts-sun8i-h3-add-thermal-zones |
(+55/-13)[1M] |
383562323ca7ebe635d2756d27db4f407dca96b8 sun8i-h3.dtsi |
The-going arm:dts:sun8i-h3 add thermal zones |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-a64-olinuxino-add-boards |
(+540/-0)[1M, 5A] |
f66bb7d81337443404fa883b78ec620af9bbba27 sun50i-a64-olinuxino-1G.dts, sun50i-a64-olinuxino-1Ge4GW.dts, sun50i-a64-olinuxino-1Gs16M.dts, sun50i-a64-olinuxino-2Ge8G.dts, sun50i-a64-olinuxino-1Ge16GW.dts, Makefile |
Mitko Gamishev arm64:dts:sun50i-a64-olinuxino add boards |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-a64-olinuxino-emmc-enable-bluetooth |
(+17/-0)[1M] |
b37e2bb85c5371d269d03a5e3ffca8909c459174 sun50i-a64-olinuxino-emmc.dts |
Stefan Saraev arm64:dts: sun50i-a64-olinuxino-emmc: enable bluetooth |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-a64-olinuxino-1Ge16GW-enable-bluetooth |
(+21/-0)[1M] |
89af9b26d9e271c383c295fe11ac198479f63863 sun50i-a64-olinuxino-1Ge16GW.dts |
Stefan Saraev arm64:dts: sun50i-a64-olinuxino-1Ge16GW: enable bluetooth |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-a64.dtsi-adjust-thermal-trip-points |
(+3/-3)[1M] |
c14c52842ce2417fe055ef850ea86d3ce172c32b sun50i-a64.dtsi |
Stefan Saraev arm64:dts:sun50i-a64.dtsi adjust thermal trip points |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-a64-olinuxino-1Ge16GW-Disable-clock-phase-and- |
(+2/-2)[1M] |
95a441c6431aa33008e96c6f97336f508e142001 sun50i-a64-olinuxino-1Ge16GW.dts |
hehopmajieh arm64:dts:sun50i-a64-olinuxino-1Ge16GW Disable clock phase and hs just for test |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-a64-pinephone-wowlan |
(+4/-3)[1M] |
fec08508b25e3275382475aa0b287ed768badf2f sun50i-a64-pinephone.dtsi |
AGM1968 Temp_fix mailbox arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h6-orangepi-3-add-r_uart-aliase |
(+1/-0)[1M] |
d15d4993b0cbc9abad4d63e12d175f405ecbaa7c sun50i-h6-orangepi-3.dts |
The-going arm64:dts: sun50i-h6-orangepi-3 add r_uart aliase |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h5-add-cpu-opp-refs |
(+9/-1)[8M] |
4f13d3a5d399e51fd3506703a25b1dfd5620b85b sun50i-h5-nanopi-k1-plus.dts, sun50i-h5-bananapi-m2-plus.dts, sun50i-h5-nanopi-m1-plus2.dts, sun50i-h5-nanopi-neo-core2.dts, sun50i-h5-nanopi-neo-plus2.dts, sun50i-h5-nanopi-neo2-v1.1.dts, sun50i-h5-nanopi-neo2.dts, sun50i-h5-orangepi-prime.dts |
The-going arm64:dts:sun50i-h5 add cpu opp refs |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h5-add-termal-zones |
(+54/-12)[1M] |
11d2e43925c1099e55f93db7fffa9cc430dff26a sun50i-h5.dtsi |
The-going arm64:dts:sun50i-h5 add termal zones |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h6-orangepi-add-cpu-opp-refs |
(+5/-0)[1M] |
668de4fcb743de2722016e766f513fdc62695b66 sun50i-h6-orangepi.dtsi |
The-going arm64:dts: sun50i-h6-orangepi add cpu opp refs |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h6-orangepi-enable-higher-clock-regulator-max- |
(+1/-1)[1M] |
336d652668872b15739fc0127c06d3a13965120e sun50i-h6-orangepi.dtsi |
The-going arm64:dts: sun50i-h6-orangepi enable higher clock regulator-max-microvolt |
| 📜 ✅ | [patches.armbian/] drv-staging-rtl8723bs-AP-bugfix |
(+1/-1)[1M] |
dbe667695f821f576fe8e315081328f0581c4b5b ioctl_cfg80211.c |
The-going drv:staging:rtl8723bs: AP bugfix |
| 📜 ✅ | [patches.armbian/] arm-dts-sun8i-h3-orangepi-pc-plus-add-wifi_pwrseq |
(+6/-0)[1M] |
b9d58592ca4cf7633d0340e75a0d4b73c0d9a00e sun8i-h3-orangepi-pc-plus.dts |
The-going arm:dts: sun8i-h3-orangepi-pc-plus add wifi_pwrseq |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h5-orangepi-prime-add-rtl8723cs |
(+5/-0)[1M] |
eb75c7c62b08d3b1f9837e465ca7c37fce359f24 sun50i-h5-orangepi-prime.dts |
The-going arm64:dts: sun50i-h5-orangepi-prime add rtl8723cs |
| 📜 ✅ | [patches.armbian/] arm-dts-sun8i-h2-plus-orangepi-zero-fix-xradio-interrupt |
(+5/-0)[1M] |
d166c157c679d62f85de33821508a5e1e6966e8e sun8i-h2-plus-orangepi-zero.dts |
The-going arm:dts: sun8i-h2-plus-orangepi-zero fix xradio interrupt |
| 📜 ✅ | [patches.armbian/] Fix-include-uapi-spi-spidev-module |
(+1/-2)[1M] |
3f67accd478979f76683cb35a692ac5f96cbe9e7 spidev.c |
The-going Fix include uapi spi spidev module |
| 📜 ✅ | [patches.armbian/] fix-cpu-opp-table-sun8i-a83t |
(+32/-20)[1M] |
9cea9f1f0e965659a3650d6ce9ef363f60cef4a5 sun8i-a83t.dtsi |
The-going fix: cpu opp table sun8i-a83t |
| 📜 ✅ | [patches.armbian/] Add-dump_reg-and-sunxi-sysinfo-drivers |
(+1448/-0)[2M, 8A] |
2ecd15679ddee8be6c9d5c13560745120a111f40 dump_reg.c, dump_reg_misc.c, sunxi-sysinfo.c, dump_reg.h, Kconfig, Makefile |
afaulkner420 Add dump_reg and sunxi-sysinfo drivers |
| 📜 ✅ | [patches.armbian/] Add-sunxi-addr-driver-Used-to-fix-uwe5622-bluetooth-MAC-address |
(+548/-0)[2M, 4A] |
97958e83bf7dc312eaa60597a6719ba7742bcbca sunxi-addr.c, sha256.c, Kconfig, Makefile |
afaulkner420 Add sunxi-addr driver - Used to fix uwe5622 bluetooth MAC addresses |
| 📜 ✅ | [patches.armbian/] nvmem-sunxi_sid-add-sunxi_get_soc_chipid-sunxi_get_serial |
(+28/-0)[1M] |
0558c2d200b921ee47639c34a4055b970837c74d sunxi_sid.c |
The-going nvmem: sunxi_sid: add sunxi_get_soc_chipid, sunxi_get_serial |
| 📜 ✅ | [patches.armbian/] mmc-host-sunxi-mmc-Fix-H6-emmc |
(+4/-1)[1M] |
9502962acb7f7450df8f29dd49b9eecc43d1acc9 sunxi-mmc.c |
Ukhellfire mmc/host/sunxi-mmc: Fix H6 emmc |
| 📜 ✅ | [patches.armbian/] arm64-dts-allwinner-sun50i-h6-Fix-H6-emmc |
(+1/-2)[1M] |
a6942e27405509b4c33c65cc98e1ce22168bc4db sun50i-h6.dtsi |
Ukhellfire arm64: dts/allwinner/sun50i-h6: Fix H6 emmc |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h5-nanopi-r1s-h5-add-rtl8153-suppor |
(+9/-1)[1M] |
3e78f0e7ce65cb2ebf067136cdb7040794714904 sun50i-h5-nanopi-r1s-h5.dts |
The-going arm64: dts: sun50i-h5-nanopi-r1s-h5: add rtl8153 support |
📜 [needs_rebase] |
[patches.armbian/] net-usb-r8152-add-LED-configuration-from-OF |
(+23/-0)[1M] |
d3c2ac5b7d83dceb99d916a1d16aea546f2ed66d r8152.c |
David Bauer net: usb: r8152: add LED configuration from OF |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h6-orangepi.dtsi-Rollback-r_rsb-to-r_i2c |
(+3/-3)[1M] |
a83601dd29c9bce44f2c6ee747828c1700af859b sun50i-h6-orangepi.dtsi |
The-going arm64: dts: sun50i-h6-orangepi.dtsi: Rollback r_rsb to r_i2c |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h616-bigtreetech-cb1 |
(+408/-0)[1M, 3A] |
8aec38eca180263f428d33279a3a8370b860a413 sun50i-h616-bigtreetech-cb1.dtsi, sun50i-h616-bigtreetech-cb1-emmc.dts, sun50i-h616-bigtreetech-cb1-sd.dts, Makefile |
Your Name add bigtreetech-cb1 dts |
| 📜 ✅ | [patches.armbian/] arm-dts-sun8i-h3-nanopi-duo2-enable-powerbutton-and-ethernet |
(+2/-1)[1M] |
b09b704d0b7add0db7e61c41435b89032df20523 sun8i-h3-nanopi-duo2.dts |
Gunjan Gupta ARM: dts: sun8i: nanopiduo2: Use key-0 as power button |
| 📜 ✅ | [patches.armbian/] arm-dts-sun8i-h3-nanopi-duo2-enable-powerbutton-and-ethernet |
(+7/-0)[1M] |
1ba864b8bf054986d373cbb1fc8d600cbd7847d2 sun8i-h3-nanopi-duo2.dts |
Gunjan Gupta ARM: dts: sun8i: nanopiduo2: enable ethernet |
| 📜 ✅ | [patches.armbian/] arm-dts-sun8i-h3-reduce-opp-microvolt-to-prevent-not |
(+4/-3)[1M] |
a1e23057e3f993353a6d1b3c38005086c474e326 sun8i-h3.dtsi |
Gunjan Gupta arm: dts: sun8i: h3: reduce opp-microvolt to prevent not supported by regulator error |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h5-enable-power-button-for-orangepi-prime |
(+2/-1)[1M] |
488961bd4dc494bf7fca40227a99cd9679930f6e sun50i-h5-orangepi-prime.dts |
Gunjan Gupta arm64: dts: sun50i: h5: enable power button for orangepi prime |
📜 [needs_rebase] |
[patches.armbian/] arm-dts-sunxi-h3-h5-add_tve |
(+310/-14)[14M, 2A] |
af072e2025ee0280849ec906175c09c28672aa77 sunxi-h3-h5.dtsi, sun8i_mixer.c, sun4i_tv.c, sun8i-h3-tve.dtso, sun50i-h5-tve.dtso, sun8i-h3.dtsi, sun50i-h5.dtsi, ccu-sun8i-h3.c, README.sun8i-h3-overlays, README.sun50i-h5-overlays, sun8i_mixer.h, sun8i-h2-plus-orangepi-zero.dts, sun8i-h3-orangepi-pc.dts, Makefile |
Radoslav enable TV Output on OrangePi Zero LTE |
| 📜 ✅ | [patches.armbian/] drivers-devfreq-sun8i-a33-mbus-disable-autorefresh |
(+2/-2)[1M] |
e9e41198165346fc02fb83dd0d23e47dcd023e9e sun8i-a33-mbus.c |
Gunjan Gupta drivers: devfreq: sun8i-a33-mbus: disable autorefresh |
| 📜 ✅ | [patches.armbian/] clk-gate-add-support-for-regmap-based-gates |
(+89/-7)[2M] |
99a22280355d013b6e13c3cc401a30dd7aff298b clk-gate.c, clk-provider.h |
Andre Przywara clk: gate: add support for regmap based gates |
| 📜 ✅ | [patches.armbian/] mfd-Add-support-for-X-Powers-AC200 |
(+203/-0)[2M, 1A] |
c14e6a050154e221ccc3d1c2e556a1fbd6f4cfac ac200.c, Kconfig, Makefile |
Jernej Skrabec mfd: Add support for X-Powers AC200 |
| 📜 ✅ | [patches.armbian/] mfd-Add-support-for-X-Powers-AC200-EPHY-syscon |
(+311/-0)[2M, 1A] |
f7f0e4dfb7dc42ef8da1e939f1e99e3736ee3d8f ac200-ephy-ctl.c, Kconfig, Makefile |
Andre Przywara mfd: Add support for X-Powers AC200 EPHY syscon |
| 📜 ✅ | [patches.armbian/] net-phy-Add-support-for-AC200-EPHY |
(+90/-0)[2M, 1A] |
758370fdbdc3782f04aeae1e127a3c35b158d02f ac200-phy.c, Kconfig, Makefile |
Jernej Skrabec net: phy: Add support for AC200 EPHY |
| 📜 ✅ | [patches.armbian/] arm64-dts-allwinner-h6-Add-AC200-EPHY-nodes |
(+73/-0)[1M] |
ceb5c4bb148eca37a09e10ab0ea4221cbfcbdb38 sun50i-h6.dtsi |
Jernej Skrabec arm64: dts: allwinner: h6: Add AC200 EPHY nodes |
| 📜 ✅ | [patches.armbian/] arm64-dts-allwinner-h6-tanix-enable-Ethernet |
(+38/-0)[1M] |
03e77960e6c1a5601ce0b438436e715c037f3f5e sun50i-h6-tanix.dtsi |
Jernej Skrabec arm64: dts: allwinner: h6: tanix: enable Ethernet |
| 📜 ✅ | [patches.armbian/] ASoC-AC200-Initial-driver |
(+786/-0)[2M, 1A] |
d77c4ca44e5ddfd3ff7eaf47b3e71f38e1e8c59e ac200.c, Kconfig, Makefile |
Jernej Skrabec ASoC: AC200: Initial driver |
| 📜 ✅ | [patches.armbian/] arm64-dts-allwinner-h6-add-AC200-codec-nodes |
(+42/-0)[1M] |
57638edc496e153bcc999faa0142182d9594757d sun50i-h6.dtsi |
Jernej Skrabec arm64: dts: allwinner: h6: add AC200 codec nodes |
| 📜 ✅ | [patches.armbian/] arm64-dts-allwinner-h6-enable-AC200-codec |
(+64/-0)[3M] |
043929641431dcbd9c2f743785f418e2a1ab8972 sun50i-h6-orangepi-3.dts, sun50i-h6-pine-h64.dts, sun50i-h6-tanix-tx6-mini.dts |
Jernej Skrabec arm64: dts: allwinner: h6: enable AC200 codec |
📜 [needs_rebase] |
[patches.armbian/] add-nodes-for-sunxi-info-addr-dump-reg |
(+38/-0)[2M] |
1e4072d113fbfb8fe95b5176e7a15f4fc2fccbc4 sun50i-h6.dtsi, sun50i-h616.dtsi |
The-going add nodes for sunxi-info, sunxi-addr and sunxi-dump-reg |
| 📜 ✅ | [patches.armbian/] add-initial-support-for-orangepi3-lts |
(+400/-0)[1M, 1A] |
9c715b18650bd1da81259662ce733b93721d451b sun50i-h6-orangepi-3-lts.dts, Makefile |
The-going add initial support for orangepi3-lts |
| 📜 ✅ | [patches.armbian/] drivers-input-axp20x-pek-allow-wakeup-after-shutdown |
(+6/-0)[1M] |
5e8a36624607f3144296f28abf17b75098d1101c axp20x-pek.c |
Samuel Holland Input: axp20x-pek - allow wakeup after shutdown |
| 📜 ✅ | [patches.armbian/] arm64-dts-add-wifi-nodes-for-Inovato-Quadra |
(+57/-0)[1M, 1A] |
d0d1b9faac05b25956990390621047e077fdc5c6 sun50i-h6-inovato-quadra.dts, Makefile |
Gunjan Gupta Add wifi nodes for Inovato Quadra |
📜 [needs_rebase] |
[patches.armbian/] arm64-dts-h616-add-wifi-support-for-orange-pi-zero-2 |
(+38/-0)[1M] |
ce66e4108e4e82a76a4e6205c02ced9014842a15 sun50i-h616-orangepi-zero.dtsi |
Gunjan Gupta arm64: dts: h616: add wifi support for orange pi zero 2 and zero3 |
📜 [needs_rebase] |
[patches.armbian/] arm64-dts-sun50i-h618-orangepi-zero3-Enable-GPU-mali |
(+5/-0)[1M] |
c129cae3e7d2d0f7d29121927df64686339bc14d sun50i-h618-orangepi-zero3.dts |
Gunjan Gupta arm64:dts: sun50i-h618-orangepi-zero3 Enable GPU mali |
📜 [needs_rebase] |
[patches.armbian/] drivers-hack-for-h616-hdmi-video-output |
(+547/-50)[11M, 2A] |
e12f54c0fd269fb9945e0531626d576f3d660b82 sun8i_mixer.c, ccu-sun8i-de33.c, sun8i_hdmi_phy.c, sun8i_csc.c, sun8i_mixer.h, sun8i_ui_layer.c, ccu-sun8i-de33.h, sun8i_vi_layer.c, Kconfig, sun4i_tcon.c, sun8i_vi_scaler.c, Makefile, sun4i_tcon.h |
orangepi-xunlong drivers: hack for h616 hdmi video output |
📜 [needs_rebase] |
[patches.armbian/] arm64-dts-h616-add-hdmi-support-for-zero2-and-zero3 |
(+242/-0)[3M] |
0db05fb270972346319b64c324d623ffc704e950 sun50i-h616.dtsi, sun50i-h616-orangepi-zero.dtsi, sun50i-h616-orangepi-zero2.dts |
Gunjan Gupta arm64: dts: h616: add hdmi support for zero2 and zero3 |
| 📜 ✅ | [patches.armbian/] arm64-dts-sun50i-h616-Add-dma-node |
(+16/-0)[1M] |
037112f1de95e79ea8ceeacef7d838e30727c33a sun50i-h616.dtsi |
Gunjan Gupta arm64: dts: sun50i-h616: Add dma node |
| 📜 ✅ | [patches.armbian/] arm64-dts-H616-Add-overlays-that-are-also-compatible-with |
(+70/-1)[2M, 5A] |
204c974ef05bc35d30ced730c9956fc4e9107e64 sun50i-h616.dtsi, sun50i-h616-i2c2.dtso, sun50i-h616-i2c3.dtso, sun50i-h616-i2c4.dtso, sun50i-h616-uart2.dtso, sun50i-h616-uart5.dtso, Makefile |
Gunjan Gupta arm64: dts: H616: Add overlays that are also compatible with orange pi zero2 and zero3 |
nathanregner / linux Goto Github PK
View Code? Open in Web Editor NEWThis project forked from gregkh/linux
Home Page: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
License: Other
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent