mzst123 / xdrip-lipo-board Goto Github PK

I have ordered the boards from OSH Park, I am currently looking for all the parts needed, my question involves the micro switches, are they a must? I currently have an xDrip Wireless Bridge built, there are no switches, its always on. I get the on/off switch option, but what is the difference between xdrip circuit and xbridge circuit?

I am sorry if this is a dumb question, just don't want to mess this up.

Hi have you had any joy getting the parakeet to work? I've ordered the parts but as yet not been able to older them all together, is there anyway you would be able to help me build the parakeet if I was to send you all the stuff.

Thanks
Deneil

Looking at the schematic it seems like there are two connectors for the battery. Is this just to support using a battery with a JST connector or solder the battery directly, or do they have separate uses?

Also, looking at the XBridge2 pdf, it seems like the wire from PIO1 on the HM-11 to P1_2 on the Wixel is no longer needed?

Just a few questions

What components need to be orientated in a certain way

• the led
• wixel
• bluetooth
• jst connector

Also the ebay link for the resistors has 150R and 150K which one of these do I want?

Morning I'm new to T1 Diabeties, my 5yr old daughter has been resently diagnosed. Be been trying to work out what's the best method for Xdrip while Mariella is at school. I've ordered the newest version of the PCB Xdrip board, wixel, HM11 but as far as anything else goes I haven't got a clue were or what there for. We're do I get the info to download the wixel? And could you post links were to get the rest of the components that I would need to get. I'm in the UK so anywere UK or Europe based would be a help xxx

mzst123,

First, thank you for putting both the PCB and enclosure projects together - I have built 2 boards so far and they have performed fantasic!

I do however wonder if it would be possible to have additional enclosures designed for larger batteries. Currently I'm using a 2000 mAh battery from adafruit in a tic-tac case. It's functional, but larger. I'd be happy to design a case around the larger battery size, but am unsure where to start in terms of design tools I have zero 3D printing experience.

My apologies for putting this on the bug tracker as a discussion rather than an actual bug, but hopefully this will spawn some useful discussion, if nothing else.

Again, thank you so much for making this available

Wes

Hi! Where I can find Xdrip PCB Lipo Board V2.1 files?

Hello mzst123,
I am using your design since several month and I am very pleased with it.
The only thing I wish to change is the battery (maybe put a larger one) and the JST connector. This is not feasable with the current enclosure.
You were mentionning that you woked on a new one. May I ask if you have reached a new design you'd be willing to share ? Otherwise, do you have the CAD version of the current one that I could use as a starting point to modify ?
Cheers,
Akira

First of all, thank you for this; excellent having a PCB to solder the components on.

Now that I have a working BLE receiver, I am planning to create a GSM receiver/Parakeet. What are the chances of you creating a modified version of this PCB where the HM11 is replaced by the SIM800L GSM module?

I would do it myself, but then I have to teach myself HOW first...

Hi,
i've read about this wonderful project, and am very interested.
I'd like to ask you if you have considered to sell one (eg if you have one more circuit).
Unfortunately I'm not so expert for realizing one from scratch.

Many thanks in advance.

Best regards :)