Node.js library for using homeduino.
homeduino = require('homeduino')
Board = homeduino.Board
board = new Board('/dev/ttyUSB0', 115200)
board.connect().then( ->
#do stuff
).done()Read a dht sensor
board.readDHT(22, 13).then( (ret) ->
console.log ret.temperature, ret.humidity
).done()Returns all Dallas temp sensors on [pin]
board.readDstSensors(12).then( (ret) ->
console.log ret.sensors
).done()Reads a sensor with [address] on [pin].
board.readDstSensor(12, '12312312333').then( (ret) ->
console.log ret.temperature
).done()Reads all sensors connected to [pin]
board.readDstAll(12).then( (ret) ->
console.log ret.temperatures
).done()board.on "rfReceive", (event) ->
console.log 'received:', event.pulseLengths, event.pulses
board.on "rf", (event) ->
console.log "#{event.protocol}: ", event.values
board.connect().then( ->
console.log "board ready"
board.rfControlStartReceiving(0).then( ->
console.log "receiving..."
).done()
).done()board.digitalWrite(4, 1).done()
board.analogWrite(1, 10).done()
board.digitalRead(4).then( (value) ->
console.log value
).done()
board.analogRead(4).then( (value) ->
console.log value
).done()
board.pinMode(1, 0).done()git clone https://github.com/pimatic/homeduinojs && cd homeduinojs && npm install
Start the repl client:
sudo ./client.js /dev/ttyUSB0 115200
It will connect to the arduino and give you a prompt, where you can enter a javascript command:
connecting to /dev/ttyUSB0 with 115200
data: "ready"
connected
homeduino> board.rfControlStartReceiving(0)
data: "ACK"
undefined
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent