#/* README IS A WORK IN PROGRESS */

#/* How to use this library */ *

• no idea right now :p

#/Files used for testing purposes/

• main.c
• IO.c
• IO.h

#/Files to be used for general library/firmware/

• SPI.h
• SPI.c
• nRF24.h
• nRF24.c - using
• CONFIG.h - contains comments that will define desired modes from the PIC24 device, ie: master-recieve, master-transmit, or slave configurations(only used for SPI)
• delay.c - used within nRF24.c to allow wait times after packets are sent/received, or after adjusting register settings
• delay.h
• nRF24L01.h - container for all macros(for register addresses or instruction set) found on the nRF24L0(1) data sheet (also found within this repository for reference)