mounte / serialchart Goto Github PK

What steps will reproduce the problem?
1. try to open a port to a virtual serial port (ie ftdi on Arduino)
2.
3.

What is the expected output? What do you see instead?

Expect it to open COM10 for example, instead "cannot open COM10, make sure the 
port is avaialable and not in use by another application"


What version of the product are you using? On what operating system?


Please provide any additional information below.

What steps will reproduce the problem?
1. Assign SerialChart to a Bluetooth COM port
2. Run

Application complains it cannot open com port

What steps will reproduce the problem?
1. Open SerialChart
2. Open Config File
3. Run SerialChart

What is the expected output? What do you see instead?
Expect chart output, application closes instead

What version of the product are you using? On what operating system?
Don't know where to find the version of the software.  Running on Windows XP

Please provide any additional information below.

Use STM32F1xx , with ST virtual com port for USB (serial port) full speed 
communication.
the software do not recognize the port.

What steps will reproduce the problem?
1. download program to the arduino 
2. open the exact file of serial chart  
3. then run 

What is the expected output? What do you see instead?
there should exist a graph in the chart zone of serial chart,but,nothing,and no 
data out from the data zone 

What version of the product are you using? On what operating system?
 latest version   ; win7 32bit

Please provide any additional information below.

I am using this with mpu6050 and arduino .it is expected to put out the data of 
accel ,ax ay az in the data zone and graph in the chart zone.there is really 
data out the serial(i test it in the serial monitor)

What steps will reproduce the problem?
1. Set up to read data from arduino
2. Run
3.

What is the expected output? What do you see instead?
I expected the soft to connect to Serial port and display a graph. I get an 
error that the soft can't connect to configured COM port. I am sure that i 
closed all other applications and even unplugged and plugged the usb cable 
again and still nothing. g

What version of the product are you using? On what operating system?
I am using the most recent Serial Chart on windows 7 32 bit. 

Please provide any additional information below.
Somehow i believe that it must be something with windows 7

What steps will reproduce the problem?
I took example configuration from this 
site:http://www.starlino.com/imu_kalman_arduino.html and modify it to my 
needs(I changed COM port number and speed). I get no data. I have tryed it with 
Hterm (terminal emulator), and data is displayed correctly


What is the expected output? What do you see instead?
Data from microcontroller. But nothing comes through

What version of the product are you using? On what operating system?
Win 7 64-bit

Please provide any additional information below.
I'm using AVR programmed in C. But as I said before in terminal emulator 
everything is displayed correctly (in format: number;number\n
example:
13;7
10;5
etc..)

What steps will reproduce the problem?
1. running the program normally, everything is fine.
2. click on the red stop button -> program crashes

What is the expected output? What do you see instead?
I want to see the process stopped to change Configuration and save data, but 
program crashes.

What version of the product are you using? On what operating system?
Windows Installation (released 8-13-2011) on Windows XP, SP3

Please provide any additional information below.

this config file i used:

[_setup_]
port=COM2
baudrate=9600
width=1000
height=200
background_color = white
grid_h_origin = 0
grid_h_step = 200
grid_h_color = #EEE
grid_h_origin_color = #CCC
grid_v_origin = 0
grid_v_step = 200
grid_v_color = #EEE
grid_v_origin_color = #CCC


[_default_]
min=1000
max=2000

[Output1]
color=blue

[Output2]
color=green

[Output3]
color=red

Information from the designated COM port received (ASCII characters)and visible 
in data window.
Graphing parameters set up appears to be working OK.
Received data does not appear in the graphing window. Is this because of the 
data format (ie ASCII) or what? 
Any help provided would be greatly appreciated.

What steps will reproduce the problem?
1. 32-bit Windows 7 or a 32-bit Windows XP
2.
3.

What is the expected output? What do you see instead?
Installing the actual program onto the computer. Gives a software 
incompatibility error.

What version of the product are you using? On what operating system?
v1.0 release date 08/23/11

Please provide any additional information below.
I've been recieving the same error message for 32-bit windows systems however I 
have gotten it to install on the Windows 7 64-bit system