morcibacsi / psavancanbridgehw Goto Github PK

J'ai peugeot 307 année 2005 commande au volant autoradio RT3 VAN
J'ai acheté un autoradio android junsun 2G 32G B commande au volant.
J'ai utilisé 4 CANBUS
Mais il fonctionne pas

When 120 ohm termination resistors are present on ether CAN or VAN line things will not work

VAN issue - The instrument gauge started to flicker all indicators turns on same way like the VAN line is disconnected
CAN issue - The screen does not turn on and RD45 will just spin CD motor for a fraction of second and this will happen in loop

I resolved the issue by removing R3 and R4 resistors.

Tested with RD45 on 206CC

after some trial. the hardware fail to read van bus data. also some problem (reboot) when send data. after measuring the data line in the car,there already have resistance. so i have to remove terminating resistor in the both tranceiver. now the hw11 is working good

Hi. Nice project, great job! I will try to build your project on my 307 2004. I just wondered earlier, where did you find TSS463 to buy? Or it's necessary to desolder from instrument cluster or display?

Thanks for you work. Want to make such device, but have question: can I use SPI - CAN converter (MCP2515 and TJA1050)?: https://images.prom.ua/2447555310_w600_h600_2447555310.jpg
or:
https://images.prom.ua/2772277826_w640_h640_mcp2551-vysokoskorostnoj-high-speed.jpg
Thanks