16 bit i8080 interface ESP32s3+st7796 code，doesn't display anything about arduino_gfx HOT 5 CLOSED

any details?

from arduino_gfx.

please use the format that can view in github

from arduino_gfx.

This is the configuration of Arduino_GFX_databus. h. My SOC is esp32s3,
and the communication method with the monitor is a 16 bit i8080 interface

My device is esp32-s3-devkitc-1, and there is no device in Arduino_GFX_dev_device. h,
so I did not make any modifications

I uncommented this code in Arduino_GFX_display. h,
Because my monitor driver chip is ST7796s and the screen size is 320 * 480

I did not make any changes in arduino_GFX_pins. h
because the development board I selected in arduinoIDE is esp32s3 dev module

from arduino_gfx.

This is a photo of the hardware

1. That lead resistor is the pull-up resistor of the RD pin, but adding this resistor doesn't seem to be useful
2. As shown in the figure, the screen backlight is normal, but the content is not displayed, only a white patch

from arduino_gfx.

not tested, seems not working

from arduino_gfx.