Comments (15)
moononournation
commented on July 21, 2024
it have many similar products, can you give your purchase link to check?
from arduino_gfx.
Zitus
commented on July 21, 2024
https://www.lilygo.cc/products/t-display-s3-amoled?variant=43506902368437
El lun, 17 jun 2024, 2:27, moononournation ***@***.***>
escribió:
… it have many similar products, can you give your purchase link to check?
—
Reply to this email directly, view it on GitHub
<#498 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AEBJTGD6AVJUS276VMLRANDZHYUNNAVCNFSM6AAAAABJMZSOU6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNZRHE3DEOBVGM>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from arduino_gfx.
moononournation
commented on July 21, 2024
the pins are correct, can you run PDQgraphicstest ok?
from arduino_gfx.
Zitus
commented on July 21, 2024
Correct device was uncommented in Arduino_GFX_dev_device.h , (don't know
about pins) but PDQgraphicstest produces nothing on the board.
El lun, 17 jun 2024 a las 8:01, moononournation ***@***.***>)
escribió:
… the pins are correct, can you run PDQgraphicstest ok?
—
Reply to this email directly, view it on GitHub
<#498 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AEBJTGFCHEHOHSPIWEUB5GTZHZ3TDAVCNFSM6AAAAABJMZSOU6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNZSGM2TIMJQGI>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
--
Mariano Goñi https://www.marianogoni.com <http://www.marianogoni.com>
from arduino_gfx.
moononournation
commented on July 21, 2024
any output in serial monitor?
from arduino_gfx.
Zitus
commented on July 21, 2024
No, nothing in serial.
How do I know what to uncomment in databus or display, if there's no name
about the board?
El lun, 17 jun 2024 a las 8:13, moononournation ***@***.***>)
escribió:
… any output in serial monitor?
—
Reply to this email directly, view it on GitHub
<#498 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AEBJTGCU5IGDBKBNBECN45DZHZ5CDAVCNFSM6AAAAABJMZSOU6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNZSGM3DQNJRHE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
--
Mariano Goñi https://www.marianogoni.com <http://www.marianogoni.com>
from arduino_gfx.
moononournation
commented on July 21, 2024
it should at least have some output show program started, please check youur board parameters selected correct in Arduino IDE tools menu
from arduino_gfx.
Zitus
commented on July 21, 2024
Sorry, there is output.
Pixels 3935183
Benchmark micro-secs
Screen fill 38491
Text 55165
Pixels 3935201
Lines 3528155
Horiz/Vert Lines 8489
Rectangles (filled) 49674
Rectangles (outline) 7060
Triangles (filled) 120497
Triangles (outline) 115618
Circles (filled) 201453
Circles (outline) 348419
Arcs (filled) 111537
Arcs (outline) 229778
Rounded rects (filled) 90156
Rounded rects (outline) 76782
Done!
But the screen remains black
El lun, 17 jun 2024 a las 8:17, Mariano Goni ***@***.***>)
escribió:
… No, nothing in serial.
How do I know what to uncomment in databus or display, if there's no name
about the board?
El lun, 17 jun 2024 a las 8:13, moononournation ***@***.***>)
escribió:
> any output in serial monitor?
>
> —
> Reply to this email directly, view it on GitHub
> <#498 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AEBJTGCU5IGDBKBNBECN45DZHZ5CDAVCNFSM6AAAAABJMZSOU6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNZSGM3DQNJRHE>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
--
Mariano Goñi https://www.marianogoni.com <http://www.marianogoni.com>
--
Mariano Goñi https://www.marianogoni.com <http://www.marianogoni.com>
from arduino_gfx.
Zitus
commented on July 21, 2024
Can you specify what to uncomment
in Arduino_GFX_databus.h, Arduino_GFX_display.h, and Arduino_GFX_pins.h for
this board?
El lun, 17 jun 2024 a las 8:20, Mariano Goni ***@***.***>)
escribió:
… Sorry, there is output.
Pixels 3935183
Benchmark micro-secs
Screen fill 38491
Text 55165
Pixels 3935201
Lines 3528155
Horiz/Vert Lines 8489
Rectangles (filled) 49674
Rectangles (outline) 7060
Triangles (filled) 120497
Triangles (outline) 115618
Circles (filled) 201453
Circles (outline) 348419
Arcs (filled) 111537
Arcs (outline) 229778
Rounded rects (filled) 90156
Rounded rects (outline) 76782
Done!
But the screen remains black
El lun, 17 jun 2024 a las 8:17, Mariano Goni ***@***.***>)
escribió:
> No, nothing in serial.
>
> How do I know what to uncomment in databus or display, if there's no name
> about the board?
>
> El lun, 17 jun 2024 a las 8:13, moononournation (<
> ***@***.***>) escribió:
>
>> any output in serial monitor?
>>
>> —
>> Reply to this email directly, view it on GitHub
>> <#498 (comment)>,
>> or unsubscribe
>> <https://github.com/notifications/unsubscribe-auth/AEBJTGCU5IGDBKBNBECN45DZHZ5CDAVCNFSM6AAAAABJMZSOU6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNZSGM3DQNJRHE>
>> .
>> You are receiving this because you authored the thread.Message ID:
>> ***@***.***>
>>
>
>
> --
> Mariano Goñi https://www.marianogoni.com <http://www.marianogoni.com>
>
>
--
Mariano Goñi https://www.marianogoni.com <http://www.marianogoni.com>
--
Mariano Goñi https://www.marianogoni.com <http://www.marianogoni.com>
from arduino_gfx.
moononournation
commented on July 21, 2024
the output seems correct. if you uncommented the dev device in the header file, no need to touch any parameters
from arduino_gfx.
Zitus
commented on July 21, 2024
I'm using arduino ide 2.1.1
Board is new, when connected first time screen worked and showed graphics.
line uncommented in dev device is #define LILYGO_T_Display_S3_AMOLED
Any other ideas?
El lun, 17 jun 2024 a las 8:30, moononournation ***@***.***>)
escribió:
… the output seems correct. if you uncommented the dev device in the header
file, no need to touch any parameters
—
Reply to this email directly, view it on GitHub
<#498 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AEBJTGEOLUIPZWQY3QKEJ4DZHZ673AVCNFSM6AAAAABJMZSOU6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNZSGM4DSNJVGM>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
--
Mariano Goñi https://www.marianogoni.com <http://www.marianogoni.com>
from arduino_gfx.
Zitus
commented on July 21, 2024
Display working now. Any information on how to use sprites with Arduino GFX Library?
from arduino_gfx.
moononournation
commented on July 21, 2024
good new, can you share what fix it?
and you may refer SpriteGif.ino to get some hint.
from arduino_gfx.
Zitus
commented on July 21, 2024
Thanks.
Yes , you need to add the library LilyGo-AMOLED-Series-master.zip and not
other.
El lun, 17 jun 2024 a las 16:17, moononournation ***@***.***>)
escribió:
… good new, can you share what fix it?
and you may refer SpriteGif.ino to get some hint.
—
Reply to this email directly, view it on GitHub
<#498 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AEBJTGF6ECC7ZRCSSA6TT3LZH3VZFAVCNFSM6AAAAABJMZSOU6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNZTGU2DQNRSHA>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
--
Mariano Goñi https://www.marianogoni.com <http://www.marianogoni.com>
from arduino_gfx.
moononournation
commented on July 21, 2024
Oh really?
from arduino_gfx.
Related Issues (20)
- Support for LilyGo T-Display S3 Long? HOT 4
- JC8048W550 ST7262 no display with V1.4.6 HOT 8
- Add support for TZT 1.9 Inch IPS 170x320 ST7789
- No image display from flash or SD (esp32S3-8048S070) HOT 7
- ILI9488 with Arduino UNO R3 HOT 7
- undefined reference to `Arduino_GFX::setFont(unsigned char const*)' HOT 1
- vscode+platformio ESP32S3 error HOT 3
- ESP32 V3.0.0 is out but didn't work with Arduino GFX HOT 3
- Error when compiling "PDQgraphicstest" for ESP32_8048S043 HOT 7
- Problem with jpeg_dec_parse_header() HOT 6
- using XL9535 IOs HOT 2
- T-QT Pro text and back colors not working HOT 4
- Problems with using setRotation HOT 4
- Is NV3023A supported? HOT 4
- WEA2012 miss D/C and TE pin define HOT 1
- Data Bus Class add bl618/bl616 HOT 1
- Pico tailor-made 8bit parallel not working, only slow software parallel with NT35510 HOT 1
- How to configure a three wire SPI without a DC line HOT 1
- Adding a new 7" blue EA7013 7inch ESP32 display with 16-bit parallel RGB interface HOT 4
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from arduino_gfx.