oreboot README
oreboot is a downstream fork of coreboot, i.e. oreboot is coreboot without 'c'.
oreboot will only target truly open systems requiring no binary blobs. For now, that means no x86. oreboot is mostly written in Rust, with assembly where needed.
oreboot currently only plans to support LinuxBoot payloads.
Demos
Output sample from the RISC-V demo
Testing DDR...
Starting to fill with data
Starting to read back data
Passed
Loading payload
Running payload
ACEGHIJLMN
Linux version 5.3.0-rc5+ (orebootorebootorebootorebooto) (gcc version 8.2.0 (Debian 8.2.0-14+build1)) #9 Tue
Sep 3 06:42:07 PDT 2019
Zone ranges:
DMA32 [mem 0x0000000080000000-0x00000000bfffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080000000-0x00000000bfffffff]
Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff]
elf_hwcap is 0x112d
Built 1 zonelists, mobility grouping on. Total pages: 258560
Kernel command line: console=ttySIF0
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 1031428K/1048576K available (814K kernel code, 80K rwdata, 98K rodata, 64K init, 171K bss, 17148K re
served, 0K cma-reserved)
Getting oreboot
Clone this repo and enter its directory, i.e.:
git clone git://github.com/oreboot/oreboot
cd oreboot
Prerequisites
In general, you will need the following packages installed:
device-tree-compiler
pkg-config
libssl
rustup
For Debian based systems, there is a make target to install those, which pulls
rustup
through curl from https://sh.rustup.rs:
make debiansysprepare
Otherwise, install the package through your system package manager.
Setting up the toolchain
Regardless of your OS, you will need to install the toolchain for oreboot. This command only needs to be done once but it is safe to do it repeatedly.
make firsttime
Keeping build tools up to date
Each time you start to work with oreboot, or even daily:
cd oreboot
make update
You should definitely do this before reporting any issues.
Building oreboot
If the mainboard uses FSP (Intel platforms), download the blobs with:
git submodule update --init
To build oreboot for a specific platform, do this:
# Go to the mainboard's directory.
cd src/mainboard/sifive/hifive
# Build in release mode.
make
# Build in debug mode.
MODE=debug make
# View disassembly
make objdump
# Run in QEMU simulation.
make run
# Flash with flashrom.
make flash
The root Makefile allows you to quickly build all platforms:
# build all mainboards
make mainboards
# build everything in parallel
make -j mainboards
QEMU
# Install QEMU for your target platform, e.g. x86
sudo apt install qemu-system-x86
# Build release build and start with QEMU
cd src/mainboard/emulation/qemu-q35 && make run
# Quit qemu with CTRL-A X
To build QEMU from source for RISC-V:
git clone https://github.com/qemu/qemu && cd qemu
mkdir build-riscv64 && cd build-riscv64
../configure --target-list=riscv64-softmmu
make -j$(nproc)
# QEMU binary is at riscv64-softmmu/qemu-system-riscv64
To build QEMU from source for aarch64:
git clone https://github.com/qemu/qemu && cd qemu
mkdir build-aarch64 && cd build-aarch64
../configure --target-list=aarch64-softmmu
make -j$(nproc)
# QEMU binary is at aarch64-softmmu/qemu-system-aarch64
Oreboot Mainboards
- Emulation
- qemu-armv7
- qemu-aarch64
- qemu-q35
- qemu-riscv
- Hardware
- Aspeed ast25x0
- Nuvoton npcm7xx
- OpenTitan crb, Documentation
- SiFive HiFive Unleashed, Documentation
Ground Rules
- Makefile must be simple. They cannot contain control flow.
- Cargo.toml files are located in the src/mainboard/x/y directories. which will allow us to build all boards in parallel.
- All code is auto-formatted with rustfmt with no exceptions. There are no vestiges of the 19th century such as line length limits.
- There will be no C.
- We will not run our own Gerrit. We are using Github for now, and the github Pull Request review mechanism.
- We will not run our own Jenkins. We will use the most appropriate CI; for now, that is Azure but we will be flexible.
Ground Rules for x86
- We prefer all pieces of the firmware to be open-source; but can accept an ME and FSP binary blob for x86 architectures.
- Blobs must be essential to boot the system and not provide any extraneous functionality which could not be implemented in Oreboot.
- Blobs must be redistributable and are ideally available on GitHub.
- Blobs must not be submitted to github.com/oreboot/oreboot. We prefer blobs to be submitted to github.com/oreboot/blobs, github.com/coreboot/blobs or some other GitHub repository.
- The blobs must be in a binary format. No additional C code, assembly files or header files are acceptable.
- Any compromises to the language safety features of Rust must be explicitly stated.
As a "measure" for how open-source firmware is, use the percentage of the final binary size. For example, if 70% of the firmware bytes are closed-source blob and 30% built from Oreboot source code, we would say the firmware is 30% open-source.
Copyright and License
The copyright on oreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.
oreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.
This makes the resulting oreboot images licensed under the GPL, version 2.