EtherCard is a driver for the ENC28J60 chip, compatible with Arduino IDE.
Adapted and extended from code written by Guido Socher and Pascal Stang.

License: GPL2

The documentation for this library is at http://jeelabs.net/pub/docs/ethercard/.

1. Download the ZIP file from https://github.com/jcw/ethercard/archive/master.zip
2. From the Arduino IDE: Sketch -> Import Library... -> Add Library...
3. Restart the Arduino IDE to see the new "EtherCard" library with examples

See the comments in the example sketches for details about how to try them out.

VCC -   3.3V
GND -    GND
SCK - Pin 13
SO  - Pin 12
SI  - Pin 11
CS  - Pin  8 # Selectable with the ether.begin() function

VCC -   3.3V
GND -    GND
SCK - Pin 52
SO  - Pin 50
SI  - Pin 51
CS  - Pin 53 # Selectable with the ether.begin() function
# The default CS pin defaults to 8, so you have to set it on a mega:
ether.begin(sizeof Ethernet::buffer, mymac, 53)

For questions and help, see the forums (at JeeLabs.net).
The issue tracker has been moved back to Github again.